F E D C B NOTES: 39,4 +- 0,3 0 c n0,65 `0,05 (15x) 6,35 `0,3 (5:1) D 0,4 12,23 +- 0,3 c 3,6 +- 0,25 0 14,21 +- 0,4 0,3 0,4 15,61 +- 0,3 3,3 `0,3 0,17 6,13 +- 0,08 C 0,4 16,19 +- 0,3 18,7 +- 0,4 0,3 1. FOR WAVESOLDERING (SOLDER BATH TEMERATURE 265°C FOR 8 SEC. AND SOLDER PREHEAT 150°C FOR 180 SEC.) 2. IP RATING: IP 67 3. SEALED TO WITHSTAND PRESSURE UP TO 1,45 PSI FOR 30 MINUTES AFTER HIGH TEMPERATURE EXPOSURE 4. METALSHELL: ZINC DIE CAST; min. 50µin NICKEL PLATING over COPPER D 5. INSULATORS: PBT GF UL 94 V-0, BLACK 6. O-RING: SILICONE PER ASTM D2000 70 SHORE A 7. SEALING COMPOUND: EPOXY RESIN UL 94 V-0; BLACK 8. CONTACTS: COPPER ALLOY PLATING (SEE PART NO): o PLEASE ADD 1 for 30µin HARD GOLD over min. 50µin NICKEL o PLEASE ADD 3 for 8µin HARD GOLD over min. 50µin NICKEL 9. METAL BRACKETS: ZINC DIE CAST; 300µin COPPER/40-120µin NICKEL/120-200µin TIN 10. WASHERS: COPPER ALLOY; 80µin NICKEL 11. HEXLOCKING SCREWS: STAINLESS STEEL 12. FIXING-PLATE: PBT GF UL 94 V-0; BLACK 13. PCB-SNAPS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL PCB-HOLE: n3.1`0.1; PCB THICKNESS 1.6mm 14. P.C.B. HOLE DRILLINGS and RECOMMENDED PANEL CUT-OUT ON SHEET 2 15. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3.1 in.LB) / max.67Ncm (6 in.LB) 16. CONNECTOR IS PART MARKED: 15-00093o CONEC ABC A C c 0,12 25 +- 0,13 8 +- 0,02 0,23 21,1 +- 0,3 0 16,46 +- 00,25 10° FIXING PLATE 3,2 `0,2 PRESS FOR FIXING ON PCB METAL BRACKET B B SEALING COMPOUND PCB SNAP O-RING 15-00093o CONEC ABC 4,6 4-40 UNC 9,4 SEE NOTE 16 c NAME: TITLE: COMPANY NAME: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL F E DO NOT ALTER CAD DRAWING BY HAND APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE: THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION A APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION 4-40 UNC SW 4,8 tolerance dim. in mm date a Origin rev. description D 12.10.09 A drawn 17.10.08 Petker D-SUB HD FEMALE 90° 23.10.08 Fischer 15pos. SOLDER PIN ANGLED metal bracket, fixing plate, hexlocking screw, snap dwg no: Inventor 10 DIN- HS part no: name C A3 sh: 1 15K1A289 R date see notes appd. d-old Ä 3435 2:1 (5:1) title: name norm 4xc scale: material: B 15-00093o (see note 8) A F E D C B A P.C.B. HOLE DRILLINGS 0,12 25 +- 0,13 D D 10,287 `0,05 2,286 `0,1 5,461 `0,1 b c b C P.C.B. EDGE c b 12,29 `0,1 + 0,1 n0,9 - 0 (15x) n3,1 `0,1 (2x) 10,31 `0,1 7,039 `0,03 1 8,33 `0,1 11,71 15,61 1,143 `0,1 b c C c FRONTPANEL RECOMMENDED PANEL CUT-OUT 20,5 `0,1 i 0,26 A B B ,4 ` R3 n3,1 `0,05 (2x) 11,4 `0,1 B 10° `1° 0 ,1 COMPANY NAME: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL F E DO NOT ALTER CAD DRAWING BY HAND TITLE: THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION NAME: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION A APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL 3 25 `0,1 CUSTOMER APPROVAL DATE: i 0,26 B A tolerance dim. in mm date 4xc Ä 3435 12.10.09 HS Ä 3344 15.04.09 HS a Origin rev. description D A drawn 17.10.08 Petker P.C.B. HOLE DRILLINGS appd. 23.10.08 Fischer PANEL CUT-OUT D-SUB Female 15pos. HD Solder pin angled 90° dwg no: Inventor 10 DIN- d-old part no: name C A3 sh: 2 15K1A289 R date 5:1 see sheet 1 title: name norm 4xb scale: material: B see sheet 1 A