F E D C B A b NOTES: 78 +- 0,3 0 (5:1) 0,4 8,6 +- 0,3 D 3,6 +- 0,25 0 b 5,99 +- 00,3 11,2 +- 0,4 0,3 11,5 +- 0,4 0,3 D 1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 265°C FOR 8 SEC. AND SOLDER PREHEAT 150°C FOR 180 SEC.) 2. IP RATING: IP 67 3. SEALED TO WITHSTAND PRESSURE UP TO 1,45 PSI FOR 30 MINUTES AFTER HIGH TEMPERATURE EXPOSURE 4. METALSHELL: ZINC DIE CAST; min. 50µin NICKEL PLATING over COPPER 5. INSULATORS: PBT GF UL 94 V-0, BLACK 6. O-RING: SILICONE PER ASTM D2000 70 SHORE A 7. RUBBER GASKET: TPE 8. SEALING COMPOUND: EPOXY RESIN UL 94 V-0; BLACK 9. CONTACTS: COPPER ALLOY PLATING (SEE PART NO): o PLEASE ADD 1 for 30µin HARD GOLD over min. 50µin NICKEL o PLEASE ADD 3 for 8µin HARD GOLD over min. 50µin NICKEL 10. REAR SPACER CLIPS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL PCB-HOLE: n3,1`0,1; PCB THICKNESS 1,6mm 11. HEXLOCKING SCREWS: STAINLESS STEEL 12. PCB-HOLE DRILLINGS and RECOMMENDED PANEL CUT-OUT ON SHEET 2 13. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3.1 in.LB) / max.67Ncm (6 in.LB) 14. CONNECTOR IS PART MARKED: 15-00044o CONEC ABC 8,23 +- 0,25 0 RUBBER GASKET PLACED ON TOP SURFACE OF MALE INSULATOR b C C 63,5 `0,13 POS. 1 55,32 +- 0,23 0,02 POS. 20 21,1 +- 0,3 0 b 10° n0,6 `0,05 (37x) B b SEALING COMPOUND O-RING B 15-00044o CONEC ABC 4,6 4-40 UNC 9,4 SEE NOTE 14 4-40 UNC SW 4,8 b TITLE: COMPANY NAME: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL F E DO NOT ALTER CAD DRAWING BY HAND NAME: THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL CUSTOMER APPROVAL DATE: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION A APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. tolerance dim. in mm date a Origin rev. description D 21.09.09 A drawn 17.10.08 Petker D-SUB MALE 21.10.08 Fischer 37pos. SOLDER PIN STRAIGHT with rear spacer clip and hexlocking screw dwg no: Inventor 10 DIN- HS part no: name C A3 sh: 1 15K1A308 R date see notes appd. d-old Ä3435 2:1 (5:1) title: name norm 6xb scale: material: B 15-00044 o (see note 9) A F E D C B A P.C.B. HOLE DRILLINGS 63,5 `0,13 24,84 `0,1 D D 22,1 `0,1 19,33 `0,1 16,56 `0,1 13,82 `0,1 11,05 `0,1 1 (37x) 2,77 `0,1 n3,1 `0,1 (2x) C 1,42 `0,1 5,54 `0,1 + 0,1 n1 - 0 2,84 `0,1 8,28 `0,1 1,4 `0,1 C 4,14 `0,1 6,91 `0,1 9,68 `0,1 12,42 `0,1 15,19 `0,1 17,96 `0,1 20,7 `0,1 23,47 `0,1 RECOMMENDED PANEL CUT-OUT B B 59,1 `0,1 i 0,26 A NAME: TITLE: COMPANY NAME: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL F E DO NOT ALTER CAD DRAWING BY HAND APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # APPROVAL THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH 63,5 `0,1 CUSTOMER APPROVAL DATE: A tolerance dim. in mm date A drawn 17.10.08 Petker P.C.B. HOLE DRILLINGS 21.10.08 Fischer PANEL CUT-OUT D-SUB Male 37pos. Solder pin straight dwg no: Inventor 10 DIN- date part no: name C A3 sh: 2 15K1A308 R Origin rev. description 3:1 see sheet 1 appd. d-old D scale: material: title: name norm a i 0,26 B 0,13 APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION 10° `1° APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION A ` R3,4 n3,1 `0,05 (2x) 11,4 `0,1 B B see sheet 1 A