H F E D C B A 91,2 max. 12,7 max. F G n1,6 n0,65 n1,6 42,5 `0,05 42,5 `0,05 F 37,25 `0,05 2,6 33 `0,05 28,75 `0,05 37,5 `0,05 24,5 `0,05 32,5 `0,05 85 20,25 `0,05 27,5 `0,05 +0 - 0 ,1 n3 x) `0 ,1 (23 x) ,1 1 D n2 8,25 `0,05 10,085 `0,05 5 6,25 `0,05 2,125 `0,05 8 4,25 `0,05 2,125 `0,05 9 1 `0,05 `0 1 3,25 `0,05 ,03 4 2,125 `0,05 D (15 13,8 10,085 Marking on opposite side (see note 5) E ,5 7,5 `0,05 7,8 17,6 n 11,75 `0,05 ,14 6 2, ,3 (9 (2x ) 16 `0,05 n1 E ) ep de 2,5 `0,05 Second Mate 2,5 `0,05 First Mate 2,125 `0,05 Pos. 22, 25, 28 Last Mate Signal 10,25 `0,05 12,25 `0,05 14,25 `0,05 16,25 `0,05 C 10 2 7 6 18,25 `0,05 3 C 20,25 `0,05 22,25 `0,05 PCB hole pattern NOTES: 1. MATERIALS AND FINISHES: - INSULATOR: GLASS FILLED PLASTIC UL 94 V-0 RATED, GREY RAL 7035 b - CONTACTS: COPPER ALLOY, PLATING: FLASH GOLD OVER NICKEL 1 3 2 5 5 1 10 2 10 1 quantity CREEPING AND CLEARANCE DISTANCE; MINIMUM: - CONTACT 38 TO CONTACT 37: 2,5 MM - CONTACT 38 TO CONTACT 36: 3,2 MM B - CONTACT 37 TO CONTACT 36: 3,2 MM - CONTACT 38 TO SIGNAL CONTACTS: 6,4 MM - CONTACT 37 TO SIGNAL CONTACTS: 6,4 MM - CONTACT 36 TO SIGNAL CONTACTS: 2,0 MM CONTACT CURRENT RATING: - POWER CONTACTS POS. 36-38: 40 AMPERES CONTINUOUS, ALL CONTACTS UNDER LOAD - POWER CONTACTS POS. 1-20: 28 AMPERES CONTINUOUS, ALL CONTACTS UNDER LOAD THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH - SIGNAL CONTACTS: 5 AMPERES NOMINAL INITIAL CONTACT RESISTANCE PER IEC 512-2, TEST 2b: - POWER CONTACTS: 0,0007 OHM MAX. - SIGNAL CONTACTS: 0,004 OHM MAX. INSULATION RESISTANCE: 5 G OHM PER IEC 512-2, TEST 3a, METHOD A 3. WORKING TEMPERATURE: -55°C TO +125°C A 4. ORDER OF CONTACT MATING: 1. MATE: POS. 36 / 2. MATE: POS. 37, 38 / LAST MATE: POS. 22, 25, 28 5. CONNECTOR IS PART MARKED: PART-NO. CONEC ABC H G Fixing plate Signal contact type 4 (Pos. 22,25,28) Signal contact type 3 (Pos. 31,34) Signal contact type 2 (Pos. 21,24,27,30,33) Signal contact type 1 (Pos. 23,26,29,32,35) Power contact type 4 (Pos. 37) Power contact type 3 (Pos. 1,3,5,7,9,11,13,15,17,19) Power contact type 2 (Pos. 36,38) Power contact type 1 (Pos. 2,4,6,8,10,12,14,16,18,20) Case 38pos. male angled standard part description partlist finish: tolerance see notes ISO 2768-m F E D C DO NOT ALTER CAD DRAWING BY HAND 2. ELECTRICAL CHARACTERISTICS: 10 9 8 7 6 5 4 3 2 1 item dim. in mm appd. 10.01.05 E. Mickenbecker SOLDER PIN ANGLED, STANDARD CompactPCI dwg no: d-old 21.02.05 Mkf. date name part no: B Inventor 45K1A003 R Ä 2168 rev. description 2:1 see notes PLUG CONNECTOR 38pos. Mankopf norm 1x b material dwg no. / norm scale: material: title: name date drawn 10.01.05 B DINA2 sh: 1 CPH38W23MARASK9X A A