X-Band 500 W SuperLinear® Outdoor TWT BUC Plays in the Rain Provides up to 200 watts of linear power at the flange in a rugged and compact weatherproof package, digital ready, for wideband, single- and multicarrier satellite service in the 7.9 to 8.4 GHz frequency band. An L-band block upconverter is included as standard. Ideal for transportable and fixed earth station applications. Cost Effective and Highly Efficient As part of the SuperLinear TWTA product line, this is the most efficient and compact amplifer in its class. Both the tube and HPA are optimized for efficient operation at linear power output levels. Reliable Designed and built to survive in extremely adverse environmental conditions and features increased cooling margin for longer life. CAN-Bus architecture improves noise immunity and reliability. Simple to Operate User-friendly microprocessor-controlled logic with integrated Ethernet computer interface. Digital metering, pin diode attenuation and optional integrated linearizer for improved intermodulation performance. Model TL05XO 500 watt X-band SuperLinear TWTB for satellite uplink applications OPTIONS •Remote Control Panel •External Receive Band Reject Filter (Increases loss by by a minimum of 60 dB from 7.25 to 7.75 GHz) •Integral linearizer (contact CPI for specifications) •Integrated 1:1 Switch Control and Drive •Low passive intermods Global Applications Meets International Safety Standard EN-60215, Electromagnetic Compatibility 2004/108/EC and Harmonic Standard EN-61000-3-2 to satisfy worldwide requirements. Meets EMI per MIL-STD-461F RE102 and CS114-116 Army Ground Profile. Worldwide Support Backed by over 40 years of satellite communications experience, and CPI’sworldwide 24-hour customer support network that includes more than twenty regional factory service centers. 811 Hansen Way, PO Box 51625 Palo Alto, CA 94303 USA tel: +1 (650) 846-3803 fax: +1 (650) 424-1744 e-mail:[email protected] website:www.cpii.com/satcom X-Band Specifications 500 W X-band SupearLinear® Outdoor TWTB Specification Model TL05XO Input Frequency 950 to 1450 MHz Output Frequency 7.9 to 8.4 GHz Output Power (min.) TWT Peak Flange Peak CW Power at Flange Max. CW Flange Power 500 watts (56.99 dBm) min. 450 watts (56.53 dBm) min. 200 watts (53.00 dBm) min. 250 watts (53.98 dBm) max. Bandwidth 500 MHz Gain Gain Stability 72 dB min. ±0.25 dB/24 hours max. (at constant drive and temperature) Small Signal Gain Slope Small Signal Gain Variation ±0.04 dB/MHz max. 1.5 dB pk-pk across any 120 MHz band; 3.0 dB pk-pk across the 500 MHz passband RF Level Adjust Range 30 dB typ. Input VSWR 1.3:1 max. Output VSWR 2.2:1 typ. Load VSWR 2.0:1 max. continuous operation; any value for operation without damage Phase Noise 1 dB below MIL-STD-188-164B Spurious -60 dBc max. at 100 W output AM/PM Conversion Harmonic Output 2.0˚/dB max. for a single carrier up to 100 W output -60 dBc at rated power at 100 W output Noise Density (at max. gain) <-70 dBW/4 kHz, passband Spectral Regrowth Intermodulation -30 dBc max. @ 1.0 S.R. -25 dBc max. with respect to the sum of both carriers at total output power of 100 W (at 200 W with optional linearizer) Group Delay 0.01 ns/MHz linear max, 0.002 ns/MHz2 parabolic max, 0.5 ns pk-pk ripple max. in any 40 MHz band Prime Power 120 to 240 VAC +/-10% single phase (100 to 240 VAC +/-10% optional), 47-63 Hz Power Consumption 1100 VA max; 850 VA typ. Power Factor 0.95 min. Amplitude and Phase Linearity Ambient Temperature Exceeds MIL-STD-188-164B Ambient Temperature -40°C to +60°C operating, plus solar loading; -54°C to +71°C non-operating Relative Humidity Altitude 100% condensing 10,000 ft. with standard adiabatic derating of 2°C/1000 ft., operating; 50,000 ft, non-operating Shock 20 g peak, 11 ms, 1/2 sine Vibration 2.1 grms, 5 to 500 Hz Acoustic Noise 65 dBA at 3 feet from amplifier Cooling Forced air with integral blower M&C Port Ethernet interface L-Band Input Connection RF Output Connection Type N female CPR-112 waveguide flange, grooved with UNC 2B 8-32 threaded holes RF Output Monitor Dimensions Type N Female, 45 dB nom. 10.5 x 8.5 x 17.0 in. max. (267 x 216 x 432 mm) Weight 32 lbs (14.5 kg) typ. Quality Management System - ISO 9001:2008 For more detailed information, please refer to the corresponding CPI technical description if one has been published, or contact CPI. Specifications may change without notice as a result of additional data or product refinement. Please contact CPI before using this information for system design. MKT 259B, ISSUE C dated JUN 2015