BUC Power Supplies FEATURES AT A GLANCE Complementary range of Power Supplies (PSUs) suitable for all CPI BUCs DuraComm™ RMSL-1248C 600 W IDU BUC Power Supply The DuraComm™ RMSL-1248C is a 300 W/600 W heavy-duty indoor switch mode power supply (SMPS). It is rack-mounted and suitable for IF-powered BUCs up to 300 W and externally powered BUCs up to 600 W. The Bias-T blocks incoming DC and multiplexes 48 V DC with IF, Reference and FSK M&C signals. Simple and easy to install Mounting kits and cables included Rugged and reliable Comply with EMI/EMC Directives CPI offers a range of PSUs for its C-Band 4700/6700/7700 series and Ku-Band 4900/6900/7900 series BUCs and accessories. These PSUs provide power and mounting options to suit most system requirements. Bias-T connection 6580B 250 W Toroidal ODU BUC Power Supply The 6580 is a 250 W heavy-duty transformer based PSU. It is designed for outdoor pole mounting and is suitable for DC-powered LBUCs up to 25 W Ku-Band and 40 W C-Band. The Bias-T blocks incoming DC and multiplexes 48 V DC with IF, Reference and FSK M&C signals. Additionally, it has Main and Auxiliary terminal connectors for externallypowered BUCs and accessories. 7580 700 W ODU BUC Power Supply The 7580 is a 700 W heavy-duty SMPS suitable for BUCs up to 40 W Ku-Band and 100 W C-Band. The SMPS is fully sealed to IP65 standard, and is fan cooled. Designed for boom mounting on the antenna, the 7580 uses the same mounting brackets as the BUCs and weighs only 2.8 kg. It has Main and Auxiliary MS-type DC output connectors for externally-powered BUCs and accessories. DuraComm™ CD-CLG-150-48 150 W ODU BUC Power Supply 7580 SMPS and 7940 Ku-Band RBUC boom-mounted 12-20225-EN Issue 8 MAY/2015 The DuraComm™ CD-CLG-150-48 ODU SMPS is a low power 48 V DC, 3.2 A, 150 W SMPS suitable for all BUCs to 16 W Ku-Band and 20 W C-Band. It has universal full range AC input and short-circuit/overload/ over-voltage protection, and IP67 rating. Weighing only 1.5 kg, it can be mounted on a 3” boom with the brackets provided. The SMPS has a 1 m DC lead with a mini 2 pin MS connector and a 5 m AC lead with free end. www.cpii.com/buc BUC Power Supplies Specifications 6580B Toroidal ODU BUC Power Supply DuraComm™ RMSL-1248C IDU BUC Power Supply DC output connector Output voltage Output power On IF output N-type connector (positive on centre pin) and screw terminal block 48 V DC nominal 300/600 W maximum 250 W maximum 700 W maximum 350 W maximum * Bias-T rated to 6 A maximum current draw Power consumption AC mains input voltage AC mains input frequency AC mains input connector Protection 115/230 V AC ±15% field switchable 47 to 63 Hz Screw terminal block Overcurrent/overvoltage power reset IF input voltage blocking IF path DC current IF path through-loss over 950 to 1750 MHz IF path through-loss at 10 MHz 1 dB maximum IF path through-loss over 590 to 710 kHz IF path gain flatness over 950 to 1750 MHz IF path gain flatness per 40 MHz 6 A maximum Mounting Operating temperature Relative humidity Weatherproofing DC output connector Output voltage Output power Power consumption AC mains input voltage AC mains input frequency AC mains input connector Protection Weight Size Mounting Operating temperature Relative humidity Weatherproofing 5 A maximum 1 dB maximum 1 dB maximum 1 dB maximum ±0.5 dB maximum over 950 to 1750 MHz ±0.2 dB maximum per 40 MHz IF path impedance IF path VSWR IF path connectors Weight Size User accessible fuse 60 V DC minimum 50 Ω 1.5:1 maximum N-type Female 3 kg 11 kg 483 mm W x 178 mm D x 88 mm H 182 mm W x 280 mm D x 136 mm H 19” rack-mount 2RU Boom mounting (kit supplied) –20°C to +55°C –40°C to +55°C 100% non-condensing 100% Indoor use only IP65 7580 ODU BUC Power Supply DuraComm™ CD-CLG-150-48 ODU BUC Power Supply MS 2-pin Female MAIN and AUX outlets MS 2-pin Female DC connector 48 V DC nominal 48 V DC nominal 700 W maximum 150 W maximum 850 W maximum 190 W maximum 95 to 265 V AC auto-ranging 100 to 265 V AC auto-ranging 47 to 63 Hz 47 to 63 Hz MS 4-pin Male No connector — free end User accessible fuse Overcurrent/overvoltage/overtemp power reset 2.8 kg 1.5 kg 182 mm W x 280 mm D x 136 mm H 222 mm W x 68 mm D x 39 mm H Boom mounting (kit supplied) Boom mounting (kit supplied) –40°C to +55°C –30°C to +70°C 100% 95% IP65 IP67 Values noted are typical. Equipment descriptions and specifications are subject to change without notice or obligation. Americas (Head Office) Europe, Middle-East Asia-Pacific & Africa CPI Satcom Products Palo Alto, CA USA CPI International Inc. Cham, Switzerland T: +41 (41) 560 7550 F: +41 (41) 560 755 CPI Asia Inc. Singapore T: +65 6225 0011 F: +65 9620 5200 CPI Europe Limited Surrey, England T: +44 (1932) 256 930 F: +44 (1932) 241 271 www.cpii.com/satcomsales T: +1 (650) 846-3803 F: +1 (650) 424-1744 12-20225-EN Issue 8 MAY 2015 [email protected]