is now part of.... Ku-Band 6900 series BLOCK UP CONVERTER ä FEATURES AT A GLANCE ■ Ideally suited to rapid deploy or offshore applications ■ AC or DC power via separate connector for 25 W BUCs ■ Separate AC power supplies available for DC powered BUCs ■ 48 V DC power via IFL and external connector for 8/16 W LBUCs ■ Available in single thread and 1+1 redundant configurations The CODAN™ Ku-Band 6900 series BUCs are purpose-built for satcom-on-the-move customers, while also offering benefits for fixed site and offshore applications. Rugged & Reliable ■ Design MTBF exceeds 100,000 hours ■ IP67 rating that provides protection from water or dust storms ■ Sealed to 34 kPA (5 Psi) Best RF Power Efficiency ■ 8–25 W of power for under 7 kg/15 lbs (LBUCs) ■ 25 W of RF power for <250 W of consumption AC or DC powered LBUC ■ 25 W of RF power for <375 W of consumption AC powered MBUC Specifically Designed ■ ■ ■ ■ ■ ■ Military applications Broadcast applications Size limited applications Highly mobile ground systems Remote area, install-and-forget applications Harsh environment operation Guaranteed Specifications Guaranteed operation to specifications throughout the environmental operating range: ■ Temperature (–40°C to +55°C) ■ Humidity (100%) Most Comprehensive Monitor & Control ■ RS232, RS422/485 ■ FSK and TCP/IP via FSK ■ Dry-contact closure ■ RF Power Meter ■ Optional Ethernet with 7550 LAN Interface A large choice of management protocols are also built into the BUC. Configuration Options ■ Standalone ■ Redundant 1+1 with Ethernet M&C ■ Optional AC Power Supplies Best Lead Times Ku-Band BUCs ■ Typical availability under 2 weeks ■ Ability to rapidly ramp up for larger requirements Best Support ■ 24x7 Customer Support line ■ Worldwide Technical Support line 12-20190-EN Issue 18 2/2012 codansatcom.cpii.com Ku-Band 6900 series BLOCK UP CONVERTER Specifications Power Rating Platform Model numbers RF output connector RF output VSWR RF output frequency range Input frequency range LO frequency IF input power @ 1 dB GCP, CW and max gain 8W DC powered LBUC 6908-W/E-48/EX-CE-NI 16 W 25 W DC powered LBUC 6916-W/S-48/EX-NI WR75, PBR120 flange with 4.2 mm through holes AC powered MBUC 6916-W/E-48/EX-CE-NI 6916-W/S-AC/EX-CE 6916-W/E-AC/EX-CE WR75, PBR120 flange with 4.2 mm through holes 1.8:1 max 1.8:1 max AC or DC powered LBUC AC powered MBUC 6925-W/S-48/EX 6925-W/S-AC/EX-LB 6925-W/S-AC/EX-CE 6925-W/E-AC/EX WR75, PBR120 flange with 4.2 mm through holes 1.5:1 max 1.5:1 max Ext Band 13750 to 14500 MHz Std Band 14000 to 14500 MHz Ext Band 13750 to 14500 MHz Std Band 14000 to 14500 MHz Ext Band 13750 to 14500 MHz Std Band 14000 to 14500 MHz Ext Band 13750 to 14500 MHz 950 to 1700 MHz 950 to 1450 MHz 950 to 1700 MHz 950 to 1450 MHz 950 to 1700 MHz 950 to 1450 MHz 950 to 1700 MHz 12800 MHz 13050 MHz 12800 MHz –31 dBm nominal –31 dBm nominal 15450 MHz 15450 MHz –31 dBm nominal –31 dBm nominal RF output power @ 1 dB GCP, CW +39.0 dBm min Gain @ 0 dB attenuation (max gain) 70 dB nominal Gain flatness over any 40 MHz band ±1.50 dB max ±1.50 dB max ±0.75 dB max Gain flatness over full band ±2.50 dB max ±2.50 dB max ±2.0 dB max ±2.0 dB max Gain stability over any 50°C temperature range ±1.50 dB max ±1.50 dB max ±1.0 dB max ±1.0 dB max Gain stability over entire temperature range when frequency set ±2.0 dB max ±2.0 dB max ±2.0 dB max Gain stability over entire temperature range when frequency not set ±3.0 dB max ±3.0 dB max ±3.0 dB max 10 MHz 10 MHz 10 MHz Multiplexed on N-type transmit IF input Multiplexed on N-type transmit IF input Multiplexed on N-type transmit IF input Reference frequency (External) Reference frequency input (External) Reference frequency level Reference frequency connector Frequency conversion Output power meter range +42.0 dBm min +41.5 dBm min +41.7 dBm min +41.0 dBm min +43.4 dBm min 73 dB nominal +43.0 dBm min 74 dB nominal ±1.50 dB max ±0.75 dB max –10 to +5 dBm –10 to +5 dBm –10 to +5 dBm Via N-type transmit IF input Via N-type transmit IF input Via N-type transmit IF input Non-inverting Non-inverting Spectrum inverting Spectrum inverting 15 dB 15 dB 10 dB 15 dB Output power meter absolute accuracy when compensation frequency set ±1.0 dB max ±1.0 dB max ±1.0 dB max Output power meter absolute accuracy when compensation frequency not set ±2.0 dB max ±2.0 dB max ±2.0 dB max Output power meter relative accuracy when compensation frequency set ±0.5 dB max ±0.5 dB max ±0.5 dB max Output power meter relative accuracy when compensation frequency not set Power meter modes Power supply voltage Power supply minimum turn-on voltage @ 48 V Power supply consumption Volume (for waveguide output BUCs) Weight ±1.0 dB max ±1.0 dB max ±1.0 dB max CW and burst (>100 uS) with adjustable threshold CW and burst (>100 uS) with adjustable threshold CW and burst (>100 uS) with adjustable threshold +34 to +60 V DC via transmit IF input and via external DC connector +34 to +60 V DC via transmit IF input and via external DC connector 94 to 275 V AC via Amphenol T 3110 000 AC: 94 to 275 V AC via Amphenol T 3110 000 DC: 34 V to 60 V DC (+ve or –ve earth) via external DC connector 94 to 275 V AC via Amphenol T 3110 000 +41 V +41 V N/A AC: N/A, DC: 41 V (+ve or –ve earth) N/A 130 W max 150 W max 300 W max 250 W max 375 W max 360 mm L x 182 mm W x 137 mm H 14.2” L x 7.2” W x 5.4” H 360 mm L x 182 mm W x 137 mm H 14.2” L x 7.2” W x 5.4” H 522 mm L x 182 mm W x 204 mm H 20.6” L x 7.2” W x 8.0” H 335 mm L x 182 mm W x 145 mm H 13.2” L x 7.2” W x 5.7” H 522 mm L x 182 mm W x 204 mm H 20.6” L x 7.2” W x 8.0” H 6 kg (13 lbs) 6 kg (13 lbs) 12 kg (26.5 lbs) 7 kg (15.5 lbs) 12 kg (26.5 lbs) Values noted are typical at 25°C. Equipment descriptions and specifications are subject to change without notice or obligation. codansatcom.cpii.com Ku-Band 6900 series BLOCK UP CONVERTER Common Specifications IF input connector N-type IF input impedance 50 Ω IF input VSWR 1.7:1 max Transmit attenuator steps 0 dB to 12 dB in 4 dB steps RF output IMD ratio with 2 CW carriers each @ 6 dB OPBO –25 dBc max Spurious/harmonic output @ 3 dB OPBO –50 dBc max (CE Versions: EN 301-428/EN 301-430) Harmonic output @ 3 dB OPBO –60 dBc max Maximum phase noise (SSB) of reference frequency: 100 Hz 1 kHz 10 kHz 100 kHz –135 dBc/Hz –145 dBc/Hz –155 dBc/Hz –155 dBc/Hz Phase noise (SSB) of BUC with reference frequency defined above: 100 Hz 1 kHz 10 kHz 100 kHz –63 dBc/Hz –73 dBc/Hz –83 dBc/Hz –93 dBc/Hz Group delay Linear (over any 10 MHz band) Parabolic (over any 80 MHz band) Ripple (over full band) 2 nsecpp max 0.00025 nsec/MHz2pp max 1 nsecpp max AM/PM conversion 2.0°/dB max @ 2 dB OPBO Monitor & Control Digital data format RS232 Digital data format RS485 Digital connector FSK data format FSK data transmitter frequency FSK data transmitter deviation FSK data transmitter sense FSK output level FSK start tone time FSK data receiver nominal frequency FSK data receiver locking range FSK data receiver input sensitivity 9600 bps, 8 bits, no parity, 1 stop bit, ASCII protocol User selectable protocols MIL-C-26482 12-14S socket User selectable protocols 650 kHz ±1% ±60 kHz ±1% +60 kHz=mark; –60 kHz=space –8 dB nominal 10 ms min 650 kHz ±30 kHz –15 dBm min Operating temperature range –40 to +55°C Non-operating/storage temperature range –40 to +70°C Relative humidity 100% Weatherproofing Sealed to 34 kPa Americas (Head Office) Europe, Middle-East Asia-Pacific & Africa CPI Satcom Products Palo Alto, CA USA CPI International Inc. Cham, Switzerland T: +41 (41) 560 7550 F: +41 (41) 560 755 CPI Asia Inc. Singapore T: +65 6225 0011 F: +65 9620 5200 CPI Europe Limited Surrey, England T: +44 (1932) 256 930 F: +44 (1932) 241 271 www.cpii.com/satcomsales T: +1 (650) 846-3803 F: +1 (650) 424-1744 12-20190-EN Issue 18 2/2012 [email protected]