Ku-Band High Performance Block Upconverter General Information Intended for outdoor environments, the CPI UB71xxx Series of Block Upconverters (BUCs) utilizes proprietary power combining techniques to achieve high power in an efficient package. This compact unit can be mounted on the antenna for maximum efficiency of operation. The unit has both serial and parallel interfaces plus simple LED indicators showing status and condition of the unit. Features • • • • • • • 80, 100, or 120 watts of output power 31.5 dB of gain adjustment Shielded outdoor package Internal filtering included Serial RS-232/422/485 I/O Non-inverting spectrum Analog temperature sensing UB71xxx Series 80, 100 and 120 watt BUCs for outdoor or hubmount satellite uplink applications OPTION •13.75 to 14.50 GHz operation Worldwide Support Backed by over 35 years of satellite communications experience, and CPI’s worldwide 24-hour customer support network that includes more than 20 regional factory service centers. 811 Hansen Way, PO Box 51625 Palo Alto, CA 94303 USA tel: +1 (650) 846-3803 fax: +1 (650) 424-1744 e-mail:[email protected] website:www.cpii.com/satcom Ku-Band Specifications 80, 100 and 120 W High Performance Block Upconverter Output Power (Psat) 49.0 dBm (80 W) typ. 50.0 dBm (100 W) typ. 50.8 dBm (120 W) typ. Output Power (P1dB) 47.8 dBm (60 W) min. 49.0 dBm (80 W) min. 49.5 dBm (90 W) min. Input Frequency Output Frequency 950 to 1450 MHz 14.00 to 14.50 GHz (13.050 GHz LO) or 13.75 to 14.50 GHz (12.800 GHz LO) External Reference Frequency 10 MHz @ 0 dBm ±5 dB Phase Noise (SSB) Per MIL-STD-188-164A -73 dBc/Hz max. @ 1 kHz offset (-76 dBc/Hz typ.) -83 dBc/Hz max. @ 10 kHz offset (-95 dBc/Hz typ.) -93 dBc/Hz max. @ 100 kHz offset (-110 dBc/Hz typ.) Small Signal Gain 60 dB min. (65 dB typ.), options available Gain Flatness ±1.25 dB max, per full band Gain Slope ±0.4 dB max. per 40 MHz Gain Stability Over Temperature ±2.0 dB Gain Adjustment Range Third Order Intermodulation Distortion 31.5 dB, in 0.5 dB steps -25 dBc, 2 tones @ 3 dB backoff from rated P1dB Harmonic Level -60 dBc max. at rated P1dB Spurious, Signal Related -60 dBc max. at rated P1dB Spurious, Signal Independent -30 dBm max. at rated P1dB AM-PM Conversion 2˚/dB typ, at 3 dB backoff from rated P1dB VSWR Input/Output 1.80:1 max./1.30:1 max. (output isolator included) Overdrive +0 dBm max, non-damaging AC Mains Operating Voltage 110 to 264 VAC, 47-63 Hz M&C Function Power Requirements Size (see outline drawing 11151) -22 dBc, 2 tones @ 3 dB backoff from rated P1dB RS-232/422/485 serial interface 460 W nom. small signal 540 W nom. large signal 550 W nom. small signal 675 W nom. large signal 640 W nom. small signal 750 W nom. large signal 13.5 L x 10.0 W x 7.5 H inches (343 x 254 x 191 mm) Weight 34 lbs. nom. (15.4 kg) Finish Epoxy paint, white standard (others optional per FED-STD 595) IF/External Reference Connector RF Output Connector Sample Output Connector Mains Input Connector User Control I/O Connection, M&C LAN/LNB Interface Operating Temperature Humidity Type N Female (J1) WR75 waveguide flange, grooved (J2) Type N Female (J3) C016 20C003-100-12 (J4) MS3112E12-14P (J5) MS3112E10-6S -40˚C to +60˚C 100% condensing For more detailed information, please refer to the corresponding CPI technical description if one has been published, or contact CPI. Specifications may change without notice as a result of additional data or product refinement. Please contact CPI before using this information for system design. Page 2 of 4 MKT 405, ISSUE 1 dated JUN 2015 Ku-Band Outline 80, 100 and 120 W High Performance Block Upconverter Quality Management System - ISO 9001:2008 For more detailed information, please refer to the corresponding CPI technical description if one has been published, or contact CPI. Specifications may change without notice as a result of additional data or product refinement. Please contact CPI before using this information for system design. MKT 405, ISSUE 1 dated JUN 2015 Page 3 of 4 Ku-Band Model Number Configuration Guide 80, 100 and 120 W High Performance Block Upconverter Construct Model Number 1 2 3 4 5 START UB 7 1 x x x - x x x 1 Frequency For shaded items, please contact CPI 2 Output Power 3 Gain 0 = 14.00 - 14.50 GHz 4 9 = 80 watts 1 = 60 dB 1 = 13.75 - 14.50 GHz 5 0 = 100 watts 2 = 70 dB x = TBD 5 1 = 120 watts x = TBD x x = TBD 5 Output 4 Voltage 0 = WR75 x = TBD 0 = 48 V DC 1 = AC x = TBD Customization Comms Type Finish Color Mate Types 0 = RS-232 0 = No Mating Connector Set 1 = RS-422/485 1 = Mating Connector Set x = TBD x = TBD Selected Configuration 1 2 3 4 5 UB 7 1 x x x - x x x 1 Frequency = TBD 2 Output Power (dBm) = TBD 3 Gain = TBD 4 Voltage = TBD 5 Output = TBD Quality Management System - ISO 9001:2008 0 = White (37925) 1 = Dark Green (34094) 2 = Desert Tan (33446) 3 = Beige (37722) 4 = Sand (33303) 5 = Forest Green (34083) 6 = Metalast x = TBD Purchase Order Additions Comms Type X Mate Types X Finish X = TBD = TBD Custom Specs Consult Factory For more detailed information, please refer to the corresponding CPI technical description if one has been published, or contact CPI. Specifications may change without notice as a result of additional data or product refinement. Please contact CPI before using this information for system design. MKT 405, ISSUE 1 dated JUN 2015 Page 4 of 4 = TBD