X-Band 100 W X-Band GaAs Block Upconverter General Information The CPI UB61050 is designed for indoor or outdoor environments. Its exceptional design and performance has been undertaken with emphasis on facilitating issuefree WGS terminal certification while providing a costcompetitive solution with a history of field-proven reliability. Specifications included here are for standard product. Please contact CPI for custom or specific performance needs. Reference Documents • LMI Drawing 11495 • Operation Manual, 11496 MAN • Outline Drawings 11128, 11229, 11374 Worldwide Support Backed by over 35 years of satellite communications experience, and CPI’s worldwide 24-hour customer support network that includes more than 20 regional factory service centers. UB-61050 Series 100 watt BUC for indoor, outdoor or hubmount satellite uplink applications OPTIONS •AC power •CPR112G flange •70 dB gain 811 Hansen Way, PO Box 51625 Palo Alto, CA 94303 USA tel: +1 (650) 846-3803 fax: +1 (650) 424-1744 e-mail:[email protected] website:www.cpii.com/satcom X-Band Specifications 100 W GaAs X-Band Block Upconverter Output Power (Psat) 50.5 dBm (112 W) Output Power (P1dB) 50 dB (100 W) typ, 49.5 dB (89 W) min. Linear Output Power (Plin) Input Frequency Output Frequency External Reference Frequency Phase Noise (SSB) Gain Gain Flatness Gain Slope Gain Stability Over Temperature 47.5 dBm typ. (56 W) --Measurement per WGS X-Band and Ka-Band Terminal Performance Certification Test Procedures, Version 1.01, 09 April 2008, Para. 5.6.2.1 950 to 1450 MHz 7.9 to 8.4 GHz (6.95 GHz LO) 10 MHz @ 0 dBm ±5 dB -72 dBc/Hz max. @ 1 kHz offset -83 dBc/Hz max. @ 10 kHz offset -93 dBc/Hz max. @ 100 kHz offset 60 dB min, 64 dB typ. ±1.25 dB max, per full band ±0.4 dB max. per 40 MHz ±2.0 dB Gain Adjustment Range 31.5 dB, in 0.5 dB steps Third Order Intermodulation Distortion -25 dBc @ 3 dB backoff from P1dB Spurious, Signal Related Spurious, Signal Independent AM-PM Conversion Input VSWR Output VSWR Overdrive Power Requirement M&C Function Size (see outline drawing 11151) -60 dBc max. at rated P1dB -60 dBc max. outside of band at rated P1dB 2˚/dB max, at rated linear output power 2.0:1 max, 1.50:1 typ. 1.30:1 max./1.25:1 typ. (output isolator included) +0 dBm max, non-damaging DC operation: +40 min. to +56 VDC at 460 W nom, small signal; AC operation (optional): 90 to 264 VAC, 47 to 63 Hz, small signal Mute, Temperature Monitor, Fault, Gain Adjust, with RS-232, RS-485 serial interface 14.5 L x 7.5 W x 7.5 H inches (369 x 191 x 191 mm) Weight 21 lbs. (9.5 kg) nom. Finish Epoxy paint, white standard (NATO green or desert tan available) IF/External Reference Connector RF Output Connector MainsPower Connector M&C Connector Operating Temperature Humidity Type N Female UG-138/U flange (CPR112G optional) C016 20C003-100-12 MS3112E12-14P -40˚C to +60˚C 100% condensing For more detailed information, please refer to the corresponding CPI technical description if one has been published, or contact CPI. Specifications may change without notice as a result of additional data or product refinement. Please contact CPI before using this information for system design. Page 2 of 4 MKT 420, ISSUE 2 dated FEB 2016 X-Band Outline 100 W GaAs X-Band Block Upconverter Note: This product’s outline can change based on the number of connectors required for any given configuration, and may not be representative of your desired configuration. Please contact CPI before using this drawing for system design. Quality Management System - ISO 9001:2008 For more detailed information, please refer to the corresponding CPI technical description if one has been published, or contact CPI. Specifications may change without notice as a result of additional data or product refinement. Please contact CPI before using this information for system design. MKT 420, ISSUE 2 dated FEB 2016 Page 3 of 4 X-Band Model Number Configuration Guide 100 W GaAs X-Band Block Upconverter Construct Model Number 3 4 5 6 Base No. 1 2 UB 6 1 0 50 - x x x x 2 Output Power 1 Frequency 5 0 = 100 watts 0 = 7.9 - 8.4 GHz 3 Gain 0 = 60 dB 1 = 70 dB 4 Voltage 5 Output 0 = 48 V DC 1 = AC Comms Type 0 = UG-138/U 1 = CPR112G 0 = RS-232 1 = RS-422/485 Customization Accessories 0 = Mating connectors 1 = Pigtail set Quality Management System - ISO 9001:2008 Finish Color (Federal Std) 0 = White (37925) 1 = Dark Green (34094) 2 = Desert Tan (33446) 3 = Beige (37722) 4 = Sand (33303) 5 = Forest Green (34083) 6 = Metalast For more detailed information, please refer to the corresponding CPI technical description if one has been published, or contact CPI. Specifications may change without notice as a result of additional data or product refinement. Please contact CPI before using this information for system design. MKT 420, ISSUE 2 dated FEB 2016 Page 4 of 4