TABLE 1: ELECTRICAL SPECIFICATIONS AT 25 OC PARAMETER MIN. PRIMARY INDUCTANCE 100 KHZ @ 0.40V. 4-6 FIGURE 1: SCHEMATIC DIAGRAM SPEC LIMITS TYP. MAX. 640.8 712 783.2 1 UNITS BIAS uH 11, 12 LEAKAGE INDUCTANCE 4-6 100 KHZ @ 0.40 V, short 7-12. -------- -------- 25 H PRIMARY RESONANT FREQ. 4-6 300 -------- ------- TURN 4-6 4-6 1-2 ---------------------- 9.67 : 1 9.67 : 1 1:1 ---------------------- 3000 -------- -------- RATIO'S: : 1-2 : 7-12 : 7-12 2 4 SECONDARY KHz PRIMARY 7, 8 + 4% + 4% + 4% C Shield 6 NC Shield Cu HIPOT: 60 Hz for 1 sec. PRIMARY AND BIAS TO SEC. Vrms NC FIGURE 2: PHYSICAL DIMENSIONS mm. 26.5 Max. PM 31.5 Max. POL-JX018 YYWW 18.0 Max. WHITE DOT PIN#1 I.D. 0.64 Sq. 4.65 34.5 1 2 3 4 5 6 NOTES: 12 11 10 9 8 1) Design to comply with the requirements of UL/CSA/ IEC60950-1. 2) Design to comply with the requirements if UL/CSA/IEC Class B insulation system. 3) All materials per Premier Magnetics UL file #E177139. 4) All units comply with the requirements of the EU RoHS Directive. 7 REV. DESCRIPTION OF CHANGES BY 05/30/13 Original Release. KC RoHS UNLESS OTHERW ISE SPECIFIED DIMENSIONS ARE IN mm. DIMENSIONAL TOLERANCES ARE: DECIMALS ANGLES .X + 0.3 + 5O .XX + 0.20 DRAW ING NOT TO SCALE. TRANSFOMER CONTROL DRAWING PREMIER P/N: POL-JX018 REVISION: 05/30/13 ENG: Peter Pham REF: TOP266VG QA: Kevin Clark SHEET: 1 OF 1