TABLE 1: ELECTRICAL SPECIFICATIONS AT 25 OC FIGURE 1: SCHEMATIC DIAGRAM 1 PARAMETER PRIMARY INDUCTANCE (1-2). 66 KHZ @ 0.40Vrms. SPEC LIMITS MIN. TYP. MAX. UNITS 2264 uH 2272 2280 PRIMARY 2/2 3 12 LEAKAGE INDUCTANCE (1-2). 10 KHZ @ .1V, ------- -------- 52 uH PRIMARY 1/2 SECONDARY 2 HIPOT: 60Hz for 1 sec. 3000 PRIMARY and BIAS to SECONDARY. -------- -------- Vrms 4 10 BIAS 5 FIGURE 2: PHYSICAL DIMENSIONS INCHES (mm). 12 11 10 P M PIN #1 WHITE DOT 1 2 9 8 7 PNK-10013 YYWW CORE TAPE 3 4 5 6 1.165 (29.6) MAX 1.140 (28.96) MAX Flux Band. Connect to pin #4. 1.102 (28.0) .300 (7.62) Typ. 0.024 (0.6) Dia. 0.149 (3.8) 1 2 0.295 (7.5) 3 4 5 6 NOTES: 1) Design to comply with the requirements of UL/CSA/ IEC60950-1. 2) Design to comply with the requirements of UL/CSA/IEC Class B insulation system. 3) All materials per Premier Magnetics UL file #E177139. 4) All units comply with the requirements of the EU RoHS Directive. 5) Connect the flux band to terminal pin #4 with #24 AWG TIW lead wire. 1.004 (25.5) 12 11 10 9 8 7 REV. DESCRIPTION OF CHANGES BY 08/09/13 Original release. KC RoHS UNLESS OTHERW ISE SPECIFIED DIMENSIONS ARE IN INCHES. DIMENSIONAL TOLERANCES ARE: DECIMALS ANGLES .XX + .02 +5O .XXX + .015 DRAW ING NOT TO SCALE. TRANSFOMER CONTROL DRAWING PREMIER P/N: PNK-10013 REVISION: 08/09/13 ENGR: PETER PHAM REF: QA: Kevin Clark SHEET: 1 OF 1