FIGURE 1: SCHEMATIC DIAGRAM TABLE 1: ELECTRICAL SPECIFICATIONS AT 25 OC PARAMETER MIN. PRIMARY INDUCTANCE: (1-3) 1.0 Vrms @ 130 KHz. Others open. 1990 SPEC LIMITS TYP. MAX. 2140 2290 UNITS 1 H PRIMARY 2 PRIMARY LEAKAGE IND. (1-3). 1.0 Vrms @ 130 KHz. Short others. -------- -------- 25 2 H PRIMARY 1 TURNS RATIOS: 1-3 : FL1-FL2 1-3 : 4-5 --------------- 9.7 : 1 9.7 : 1 ----------------- FL1 SECONDARY 3 +/-4% +/-4% FL2 4 HI-POT: 60 Hz at 1 sec. PRIMARYand BIAS to SECONDARY. BIAS 3000 -------- -------- Vrms 5 FIGURE 2: PHYSICAL DIMENSIONS FL1 P M FL2 POL-JX012 YYWW CORE CLIP, 2EA WHITE DOT DENOTES PIN#1 SIDE OF BOBBIN 1 2 3 4 5 27.0 Max. 29.0 Max. 19.5 Max. 6.0 +/-0.5 0.7 0.80 Dia, 50.0 3.50 Notes: 1) Design to comply with the requirements of UL/ CSA/IEC 60950-1. 2) Design to comply with the requirements of UL/ CSA/IEC Class B insulation system. 3) All materials per Premier Magnetics UL file #E177139. 4) All units comply wiht the requirments of the EU RoHS Directive. REV. 06/03/13 DESCRIPTION OF CHANGES Original Release. RoHS UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN mm. DIMENSIONAL TOLERANCES ARE: DECIMALS ANGLES .X + 0.2 + 0 O 30' .XX + 0.30 DRAW ING NOT TO SCALE. INDUCTOR CONTROL DRAWING PREMIER P/N: POL-JX012 REVISION: 06/05/13 ENG: PETER PHAM REF: TOP265EG QA: Kevin Clark SHEET: 1 OF 1 BY KC