TABLE 1: ELECTRICAL SPECIFICATIONS AT 25OC FIGURE 1: SCHEMATIC DIAGRAM SPEC LIMITS TYP. M AX. PARAMETER MIN. PRIMARY INDUCTANCE (3-1) FREQ. = 100 KHZ @ 0.4Vrms 2050 LEAKAGE IND (3-1). (TIE 8-5) FREQ. = 100 KHZ @ 0.250Vrms -------- 2240 2400 UNITS 8 (7V@175mA) HY 1 -------- 100 HY PRIMARY TURN RATIO'S: 3-1:8-5 3-1:8-6 -------- 9.2:1 -------- 15.9:1 --------------- + 3% + 3% PRIMARY RESONANT FREQUENCY 540 -------- -------- kHz HIPOT: PRIMARY TO SECONDARY 3000 -------- -------- Vrms 3 SEC #2 6 SEC #1 5 (-5V@300mA) FIGURE 2: PHYSICAL DIMENSIONS mm (INCHES) 8 WHITE DOT DENOES PIN#1 1 7 2 6 3 5 4 15.00 (.59) MAX 18.54 (.730) MAX P PNK-36003 M YYWW CORE TAPED 14.6 (.575) MAX 4.0 (.157) 3.81 (.150) 1 2 3 0.6 (.023) NOTE1: 4 A) ALL MATERIALS MEET "UL", "CSA" & "IEC" REQUIREMENTS B)TRIPLE BASIC INSULATED SECONDARY C) VARNISH FINISHED ASSEMBLY. 12.5 (.492) 8 7 6 REV. DESCRIPTION OF CHANGES BY 02/10/09 OGIRINAL RELEASE PP 5 UNLESS OTHERW ISE SPECIFIED DIMENSIONS ARE IN MM DIMENSIONAL TOLERANCES ARE: DECIMALS ANGLES .X + .25 +0 O 30' .XX + .15 DO NOT SCALE DRAW ING TRANSFORMER CONTROL DRAWING PREMIER P/N: PNK-36003 REVISION: 02/10/09 ENGR: PETER PHAM REF: LNK-XT SCALE: NONE SHEET: 1 OF 1