TABLE 1: ELECTRICAL SPECIFICATIONS AT 25OC FIGURE 1: SCHEMATIC DIAGRAM NC PARAMETER PRIMARY INDUCTANCE (2-1) FREQ. = 100 KHZ @ 0.250Vrms SPEC LIMITS MIN. TYP. M AX. UNITS 3950 HY 4165 4375 SHIELD #1 1 PRIMARY TURN RATIO'S: PRI : BIAS PRI : SEC 7,8 (2V@@1.5A) -------- 9:1 -------- 48:1 --------------- + 3% + 3% 2 PRI LEAKAGE IND. (SEC'S SHORTED) FREQ. = 100 KHZ @ 0.250Vrms -------- 130 HY 3 PRIMARY RESONANT FREQUENCY 600 HIPOT: PRIMARY TO SECONDARY 3000 SECONDARY -------- BIAS kHz 5,6 4 -------- -------- Vrms SHIELD #2 NC FIGURE 2: PHYSICAL DIMENSIONS mm (INCHES) WHITE DOT DENOES PIN#1 8 7 6 5 1 2 3 4 17.0 (.670) MAX CORE TAPED 15.5 (.610) MAX P PNK-56001 M YYWW 15.0 (.590) MAX 3.5 (.137) MIN 1.3 (.051) 1 3.0 (.118) 3 2 3.8 (.150) 0.6 (.024) 4 11.0 (.433) 8 7 6 NOTE1: A) ALL MATERIALS MEET "UL", "CSA" & "IEC" REQUIREMENTS B) TRIPLE BASIC INSULATED SECONDARY. C) VARNISH FINISHED ASSEMBLY. 5 REV. 04/30/13 UNLESS OTHERW ISE SPECIFIED DIMENSIONS ARE IN INCHES DIMENSIONAL TOLERANCES ARE: DECIMALS ANGLES .XX + .02 +5O .XXX + .001 DO NOT SCALE DRAWING DESCRIPTION OF CHANGES ORIGINAL RELEASE TRANSFORMER CONTROL DRAWING PREMIER P/N: PNK-56001 REVISION: 04/30/13 ENGR: PETER PHAM REF: LINK-564PN QA: KEVIN CLARK SHEET: 1 OF 1 BY PP