TABLE 1: ELECTRICAL SPECIFICATIONS AT 25OC PARAMETER MIN. PRIMARY INDUCTANCE (3-2) FREQ. = 100 KHZ @ 0.250Vrms 2000 FIGURE 1: SCHEMATIC DIAGRAM SPEC LIMITS TYP. M AX. 2185 2400 UNITS 8 (18V@@300mA HY 2 TURN RATIO'S: 3-2: 8-6 3-2: 7-5 -------- 7.69:1 -------- 18.2:1 --------------- + 3% + 3% PRI LEAKAGE IND. (SEC'S SHORTED) FREQ. = 100 KHZ @ 0.250Vrms -------- 110 HY PRIMARY RESONANT FREQUENCY 500 HIPOT: PRIMARY TO SECONDARY 3000 -------- PRIMARY 3 SEC #2 6 7 6,7 (5V@100mA) SEC #1 5 kHz -------- -------- Vrms FIGURE 2: PHYSICAL DIMENSIONS mm (INCHES) WHITE DOT DENOES PIN#1 8 7 6 5 1 2 3 4 17.0 (.670) MAX CORE TAPED 15.5 (.610) MAX P PNK-36001 M YYWW 15.0 (.590) MAX 3.5 (.137) MIN 1.3 (.051) 1 3.0 (.118) 3 2 3.8 (.150) 0.6 (.024) 4 11.0 (.433) 8 7 6 NOTE1: A) ALL MATERIALS MEET "UL", "CSA" & "IEC" REQUIREMENTS B) TRIPLE BASIC INSULATED SECONDARY. C) VARNISH FINISHED ASSEMBLY. 5 REV. 02/10/09 UNLESS OTHERW ISE SPECIFIED DIMENSIONS ARE IN INCHES DIMENSIONAL TOLERANCES ARE: DECIMALS ANGLES .XX + .02 +5O .XXX + .001 DO NOT SCALE DRAWING DESCRIPTION OF CHANGES ORIGINAL RELEASE TRANSFORMER CONTROL DRAWING PREMIER P/N: PNK-36001 REVISION: 02/10/09 ENGR: PETER PHAM REF: LINK-XT SCALE: NONE SHEET: 1 OF 1 BY PP