C3D04060E VRRM = Silicon Carbide Schottky Diode IF (TC=135˚C) = 7.5 A Z-Rec™ Rectifier Qc Features • • • • • • • • 600 V = 8.5 nC Package 600-Volt Schottky Rectifier Optimized for PFC Boost Diode Application Zero Reverse Recovery Current Zero Forward Recovery Voltage High-Frequency Operation Temperature-Independent Switching Behavior Extremely Fast Switching Positive Temperature Coefficient on VF TO-252-2 Benefits • • • • • Replace Bipolar with Unipolar Rectifiers Essentially No Switching Losses Higher Efficiency Reduction of Heat Sink Requirements Parallel Devices Without Thermal Runaway PIN 1 Applications • • CASE PIN 2 Switch Mode Power Supplies Power Factor Correction - Typical PFC Pout : 400W-600W Part Number Package Marking C3D04060E TO-252-2 C3D04060 Maximum Ratings (TC = 25 ˚C unless otherwise specified) Symbol Parameter Unit Test Conditions VRRM Repetitive Peak Reverse Voltage 600 V VRSM Surge Peak Reverse Voltage 600 V VDC DC Blocking Voltage 600 V Forward Continuous Current 15.5 7.5 4 A TC=25˚C TC=135˚C TC=155˚C 22 17 A TC=25˚C, tP=10 mS, Half Sine Wave D=0.3 TC=110˚C, tP=10 mS, Half Sine Wave D=0.3 IF IFRM Repetitive Peak Forward Surge Current IFSM Non-Repetitive Peak Forward Surge Current 31.9 28.5 A TC=25˚C, tP=10 mS, Half Sine Wave D=0.3 TC=110˚C, tP=10 mS, Half Sine Wave D=0.3 IFSM Non-Repetitive Peak Forward Surge Current 110 A TC=25˚C, tP=10 µS, Pulse Ptot Power Dissipation 75 32.5 W TC=25˚C TC=110˚C -55 to +175 ˚C 1 8.8 Nm lbf-in TJ , Tstg Operating Junction and Storage Temperature TO-220 Mounting Torque 1 Value C3D04060E Rev. E M3 Screw 6-32 Screw Note Electrical Characteristics Symbol Parameter Typ. Max. Unit Test Conditions Note VF Forward Voltage 1.5 1.8 1.8 2.4 V IF = 4 A TJ=25°C IF = 4 A TJ=175°C IR Reverse Current 10 20 50 100 μA VR = 600 V TJ=25°C VR = 600 V TJ=175°C QC Total Capacitive Charge 8.5 nC VR = 600 V, IF = 4A di/dt = 500 A/μs TJ = 25°C C Total Capacitance 251 22 21 pF VR = 0 V, TJ = 25°C, f = 1 MHz VR = 200 V, TJ = 25˚C, f = 1 MHz VR = 400 V, TJ = 25˚C, f = 1 MHz Note: 1. This is a majority carrier diode, so there is no reverse recovery charge. Thermal Characteristics Symbol RθJC Parameter Typ. Unit TO-252 Package Thermal Resistance from Junction to Case 2.02 °C/W Typical Performance TO-220 4A 8.0 8.0 1010 (uA) 88 IF Forward Current (A) IF Forward Current (A) 6.0 6.0 99 25°C 75°C 125°C 175°C 5.0 5.0 IRI Reverse Current (μA) Reverse Current TJ = TJ = TJ = TJ = 7.0 7.0 Current(A) Series2 4.0 4.0 Series3 Series4 3.0 3.0 66 Series1 Series2 55 Series3 Series4 44 33 TJ = 25°C TJ = 75°C 22 TJ = 125°C R 2.0 2.0 77 TJ = 175°C 1.0 1.0 11 0.0 0 0.0 0.0 0.5 0.5 1.0 1.0 1.5 1.5 2.0 2.0 Forward (V)(V) VF ForwardVFVoltage Figure 1. Forward Characteristics 2 C3D04060E Rev. E 2.5 2.5 3.0 3.0 00 00 100 100 200 200 300 300 400 400 500 500 600 600 VR Reverse Voltage VR Reverse Voltage (V) (V) Figure 2. Reverse Characteristics 700 700 800 800 Typical Performance "D2_4A_TO-220" 140 140 40 35 120 120 25 100 100 C Capacitance (pF) IF(PEAK) Peak Forward Current (A) 30 Duty* Duty* Duty* Duty* 20 15 10 80 80 "D2_4A_TO-220" 60 60 40 40 20 20 5 0 25 C Capacitance (pF) 20% 30% 50% 70% DC 00 50 75 100 125 150 175 1 1 10 10 100 100 V Reverse Voltage (V) VR R Reverse Voltage (V) TC Case Temperature (°C) * Frequency > 1KHz Figure 3. Current Derating Zth (°C/W) Figure 4. Capacitance vs. Reverse Voltage Time (s) Figure 5. Transient Thermal Impedance 3 C3D04060E Rev. E 1000 1000 Typical Performance 80.0 80 70.0 70 Power Dissipation (W) Power Dissipation (W) 60.0 60 50.0 50 40 40.0 30.0 30 20.0 20 10.0 10 0.00 25 25 50 50 75 100 125 150 75 100 125 150 T c Case Temperature (°C) TC Case Temperature (°C) 175 175 Figure 6. Power Derating Package Dimensions Package TO-252-2 * POS Inches Millimeters Min Max Min Max A .250 .289 6.350 7.341 B .197 .215 5.004 5.461 C .027 .050 .686 1.270 D* .270 .322 6.858 8.179 E .178 .182 4.521 4.623 F .025 .045 .635 1.143 G 44˚ 46˚ 44˚ 46˚ H .380 .410 9.652 10.414 J .090 TYP 2.286 TYP K 6˚ 8˚ 6˚ 8˚ L .086 .094 2.184 2.388 M .018 .034 .457 .864 N .035 .050 .889 1.270 P .231 .246 5.867 6.248 Q 0.00 .005 0.00 .127 R R0.010 TYP .017 .023 .432 .584 T .038 .045 .965 1.143 U .021 .029 .533 .737 Note: * Tab “D” may not be present 4 C3D04060E Rev. E R0.254 TYP S Recommended Solder Pad Layout 0.08 TO-252-2 Part Number Package Marking C3D04060E TO-252-2 C3D04060 Note: Recommended soldering profiles can be found in the applications note here: http://www.cree.com/power_app_notes/soldering Diode Model Diode Model CSD10060 VfVfT T==VTV+T+If*R If*RT T V -3 -3) 0.98+(T * -1.8*10 VTT==0.92 + (Tj * J-1.35*10 ) -4 -3 R 0.10+(T 9.16*10 RT =0.052 + (T *J*0.29*10 ) ) T= j Note: Tj = Diode Junction Temperature In Degrees Celsius VT 5 C3D04060E Rev. E RT Notes • RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. • REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future,please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. • This product has not been designed or tested for use in, and is not intended for use in, applications implanted into the human body nor in applications in which failure of the product could lead to death, personal injury or property damage, including but not limited to equipment used in the operation of nuclear facilities, life-support machines, cardiac defibrillators or similar emergency medical equipment, aircraft navigation or communication or control systems, air traffic control systems, or weapons systems. Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo, and Zero Recovery are registered trademarks of Cree, Inc. 6 C3D04060E Rev. E Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5451 www.cree.com/power