Cree XLamp XT-E LED Data Sheet

Cree® XLamp® XT-E LEDs
Product Description
FEATURES
XLamp® XT-E LED is Cree’s highest performing silicon carbide-
• Available in white, 80-CRI min white, 70-CRI min white and
based LED technology, delivered in Cree’s industry-standard XP/XT
CLD-DS41 Rev 13B
Product family data sheet
royal blue
packaging. XT-E White sets the new standard for high performance
• Warm white available in 85- and 90-CRI min.
and dramatically lowers system cost. XT-E royal blue is Cree’s
• New: available in 2200 K CCT
highest performing source of royal blue light for remote‑phosphor
• Binned at 85 °C
applications.
• Cool white efficacy of up to 148 lm/W (@ 85 °C, 350 mA)
• Royal blue wall plug efficiency of up to 53% (@ 85 °C,
Cree XLamp LEDs bring high performance and quality of light to
350 mA)
a wide range of lighting applications, including remote‑phosphor,
• Wide viewing angle: 115-140°
color‑changing, portable and personal, outdoor, indoor‑directional,
• Thermal resistance: 5 °C/W
transportation, stage and studio, commercial and emergency‑vehicle
• Maximum drive current: 1.5 A
lighting.
• Electrically neutral thermal path
• Vf binning supported for XT-E white and royal blue
• XT-E royal blue sorted into 2.5‑nm wavelength bins
• Unlimited floor life at ≤ 30 ºC/85% RH
• Reflow solderable - JEDEC J‑STD‑020C compatible
• RoHS- and REACh‑compliant
www.cree.com/Xlamp
• UL® recognized component (E349212)
NOTE: For remote phosphor applications, a separate license to certain Cree patents is required.
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and
XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
1
XLamp ® XT-E LED
Table of contents
Characteristics........................................................................................................................................................................................................ 3
Flux Characteristics - White.................................................................................................................................................................................... 4
Flux Characteristics - Royal Blue.......................................................................................................................................................................... 14
Relative Spectral Power Distribution - White....................................................................................................................................................... 15
Relative Spectral Power Distribution - Royal Blue............................................................................................................................................... 15
Relative Luminous Flux vs. Junction Temperature - White................................................................................................................................ 16
Relative Radiant Flux vs. Junction Temperature - Royal Blue............................................................................................................................ 16
Electrical Characteristics...................................................................................................................................................................................... 17
Relative Luminous Flux vs. Current - White......................................................................................................................................................... 18
Relative Radiant Flux vs. Current - Royal Blue..................................................................................................................................................... 18
Relative Chromaticity vs. Current and Temperature........................................................................................................................................... 19
Typical Spatial Distribution - White...................................................................................................................................................................... 20
Typical Spatial Distribution - Royal Blue.............................................................................................................................................................. 20
Thermal Design..................................................................................................................................................................................................... 21
Performance Groups – Luminous Flux............................................................................................................................................................... 21
Performance Groups – Radiant Flux................................................................................................................................................................... 22
Performance Groups – Dominant Wavelength................................................................................................................................................... 22
Performance Groups – Forward Voltage............................................................................................................................................................ 22
Performance Groups – Chromaticity................................................................................................................................................................... 23
Cree’s Standard White Chromaticity Regions Plotted on the CIE 1931 Curve.................................................................................................. 27
Cree’s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions.......................................................................................... 28
Cree’s Outdoor White Kits Plotted on ANSI Standard Chromaticity Regions.................................................................................................... 29
Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions................................................................... 30
Cree’s 2200 K CCT White Kit Plotted on ANSI Standard Chromaticity Regions................................................................................................ 31
Cree’s Standard Chromaticity Kits....................................................................................................................................................................... 31
Bin and Order Code Formats................................................................................................................................................................................ 32
Reflow Soldering Characteristics......................................................................................................................................................................... 33
Notes..................................................................................................................................................................................................................... 34
Mechanical Dimensions....................................................................................................................................................................................... 36
Tape and Reel........................................................................................................................................................................................................ 37
Packaging.............................................................................................................................................................................................................. 38
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
2
XLamp ® XT-E LED
Characteristics
Characteristics
Unit
Thermal resistance, junction to solder point
°C/W
5
Viewing angle (FWHM) - white
degrees
115
Viewing angle (FWHM) - royal blue
degrees
140
Temperature coefficient of voltage
mV/°C
-2.5
ESD withstand voltage (HBM per Mil-Std-883D)
Minimum
Typical
Maximum
V
8000
mA
1500
Reverse voltage
V
5
Forward voltage (@ 350 mA, 85 °C)
V
LED junction temperature
°C
DC forward current
2.85
3.4
150
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
3
XLamp ® XT-E LED
Flux Characteristics - White (TJ = 85 °C)
The following tables provide base order codes for XLamp XT-E White LEDs. For a complete description of the order code nomenclature,
please see the Bin and Order Code Formats section (page 32). For definitions of the chromaticity kits, please see the Cree’s Standard
Chromaticity Kits section (page 31).
Chromaticity
Kit
51
53
CCT
6200 K
6000 K
Minimum Luminous Flux
(lm) @ 350 mA
Order Codes
Code
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
No Minimum CRI
70 CRI Minimum
S3
156
177
XTEAWT-00-0000000000K51
XTEAWT-00-000000000BK51
S2
148
168
XTEAWT-00-0000000000J51
XTEAWT-00-000000000BJ51
R5
139
158
XTEAWT-00-0000000000H51
XTEAWT-00-000000000BH51
XTEAWT-00-000000000HH51
R4
130
148
XTEAWT-00-0000000000G51
XTEAWT-00-000000000BG51
XTEAWT-00-000000000HG51
R3
122
140
XTEAWT-00-0000000000F51
XTEAWT-00-000000000BF51
XTEAWT-00-000000000HF51
R2
114
130
XTEAWT-00-0000000000E51
XTEAWT-00-000000000BE51
XTEAWT-00-000000000HE51
Q5
107
122
S3
156
177
XTEAWT-00-0000000000K53
XTEAWT-00-000000000BK53
S2
148
168
XTEAWT-00-0000000000J53
XTEAWT-00-000000000BJ53
R5
139
158
XTEAWT-00-0000000000H53
XTEAWT-00-000000000BH53
XTEAWT-00-000000000HH53
R4
130
148
XTEAWT-00-0000000000G53
XTEAWT-00-000000000BG53
XTEAWT-00-000000000HG53
R3
122
140
XTEAWT-00-0000000000F53
XTEAWT-00-000000000BF53
XTEAWT-00-000000000HF53
R2
114
130
XTEAWT-00-0000000000E53
XTEAWT-00-000000000BE53
XTEAWT-00-000000000HE53
Q5
107
122
75 CRI Typical
80 CRI Minimum
85 CRI Minimum
90 CRI Minimum
XTEAWT-00-000000000HD51
XTEAWT-00-000000000HD53
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 34).
•
Cree XLamp XT-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
*
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
4
XLamp ® XT-E LED
Flux Characteristics - White (TJ = 85 °C) - continued
Chromaticity
Kit
50
E1
E2
CCT
6200 K
6500 K
5700 K
Minimum Luminous Flux
(lm) @ 350 mA
Order Codes
Code
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
No Minimum CRI
70 CRI Minimum
S3
156
177
XTEAWT-00-0000000000K50
XTEAWT-00-000000000BK50
S2
148
168
XTEAWT-00-0000000000J50
XTEAWT-00-000000000BJ50
R5
139
158
XTEAWT-00-0000000000H50
XTEAWT-00-000000000BH50
XTEAWT-00-000000000HH50
R4
130
148
XTEAWT-00-0000000000G50
XTEAWT-00-000000000BG50
XTEAWT-00-000000000HG50
R3
122
140
XTEAWT-00-0000000000F50
XTEAWT-00-000000000BF50
XTEAWT-00-000000000HF50
R2
114
130
XTEAWT-00-0000000000E50
XTEAWT-00-000000000BE50
XTEAWT-00-000000000HE50
Q5
107
122
S3
156
177
XTEAWT-00-0000000000KE1
XTEAWT-00-000000000BKE1
S2
148
168
XTEAWT-00-0000000000JE1
XTEAWT-00-000000000BJE1
R5
139
158
XTEAWT-00-0000000000HE1
XTEAWT-00-000000000BHE1
XTEAWT-00-000000000HHE1
R4
130
148
XTEAWT-00-0000000000GE1
XTEAWT-00-000000000BGE1
XTEAWT-00-000000000HGE1
R3
122
140
XTEAWT-00-0000000000FE1
XTEAWT-00-000000000BFE1
XTEAWT-00-000000000HFE1
R2
114
130
XTEAWT-00-0000000000EE1
XTEAWT-00-000000000BEE1
XTEAWT-00-000000000HEE1
Q5
107
122
S3
156
177
XTEAWT-00-0000000000KE2
XTEAWT-00-000000000BKE2
S2
148
168
XTEAWT-00-0000000000JE2
XTEAWT-00-000000000BJE2
R5
139
158
XTEAWT-00-0000000000HE2
XTEAWT-00-000000000BHE2
XTEAWT-00-000000000HHE2
R4
130
148
XTEAWT-00-0000000000GE2
XTEAWT-00-000000000BGE2
XTEAWT-00-000000000HGE2
R3
122
140
XTEAWT-00-0000000000FE2
XTEAWT-00-000000000BFE2
XTEAWT-00-000000000HFE2
R2
114
130
XTEAWT-00-0000000000EE2
XTEAWT-00-000000000BEE2
XTEAWT-00-000000000HEE2
Q5
107
122
75 CRI Typical
80 CRI Minimum
85 CRI Minimum
90 CRI Minimum
XTEAWT-00-000000000HD50
XTEAWT-00-000000000HDE1
XTEAWT-00-000000000HDE2
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 34).
•
Cree XLamp XT-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
*
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
5
XLamp ® XT-E LED
Flux Characteristics - White (TJ = 85 °C) - continued
Chromaticity
Kit
E3
C1
CCT
Minimum Luminous Flux
(lm) @ 350 mA
Order Codes
Code
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
No Minimum CRI
70 CRI Minimum
S3
156
177
XTEAWT-00-0000000000KE3
XTEAWT-00-000000000BKE3
S2
148
168
XTEAWT-00-0000000000JE3
XTEAWT-00-000000000BJE3
XTEAWT-00-000000000LJE3
R5
139
158
XTEAWT-00-0000000000HE3
XTEAWT-00-000000000BHE3
XTEAWT-00-000000000LHE3
XTEAWT-00-000000000HHE3
R4
130
148
XTEAWT-00-0000000000GE3
XTEAWT-00-000000000BGE3
XTEAWT-00-000000000LGE3
XTEAWT-00-000000000HGE3
R3
122
140
XTEAWT-00-0000000000FE3
XTEAWT-00-000000000BFE3
XTEAWT-00-000000000LFE3
XTEAWT-00-000000000HFE3
R2
114
130
XTEAWT-00-0000000000EE3
XTEAWT-00-000000000BEE3
XTEAWT-00-000000000LEE3
XTEAWT-00-000000000HEE3
Q5
107
122
Q4
100
Q3
85 CRI Minimum
90 CRI Minimum
XTEAWT-00-000000000PDE3
XTEAWT-00-000000000UDE3
114
XTEAWT-00-000000000PCE3
XTEAWT-00-000000000UCE3
93.9
107
XTEAWT-00-000000000PBE3
XTEAWT-00-000000000UBE3
Q2
87.4
99.2
XTEAWT-00-000000000PAE3
XTEAWT-00-000000000UAE3
S3
156
177
XTEAWT-00-0000000000KC1
XTEAWT-00-000000000BKC1
S2
148
168
XTEAWT-00-0000000000JC1
XTEAWT-00-000000000BJC1
XTEAWT-00-000000000LJC1
R5
139
158
XTEAWT-00-0000000000HC1
XTEAWT-00-000000000BHC1
XTEAWT-00-000000000LHC1
R4
130
148
XTEAWT-00-0000000000GC1
XTEAWT-00-000000000BGC1
XTEAWT-00-000000000LGC1
R3
122
140
XTEAWT-00-0000000000FC1
XTEAWT-00-000000000BFC1
XTEAWT-00-000000000LFC1
R2
114
130
XTEAWT-00-0000000000EC1
XTEAWT-00-000000000BEC1
XTEAWT-00-000000000LEC1
5000 K
5000 K
75 CRI Typical
80 CRI Minimum
XTEAWT-00-000000000HDE3
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 34).
•
Cree XLamp XT-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
*
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
6
XLamp ® XT-E LED
Flux Characteristics - White (TJ = 85 °C) - continued
Chromaticity
Kit
F4
D1
CCT
Minimum Luminous Flux
(lm) @ 350 mA
Order Codes
Code
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
No Minimum CRI
70 CRI Minimum
S3
156
177
XTEAWT-00-0000000000KF4
XTEAWT-00-000000000BKF4
S2
148
168
XTEAWT-00-0000000000JF4
XTEAWT-00-000000000BJF4
XTEAWT-00-000000000LJF4
R5
139
158
XTEAWT-00-0000000000HF4
XTEAWT-00-000000000BHF4
XTEAWT-00-000000000LHF4
XTEAWT-00-000000000HHF4
R4
130
148
XTEAWT-00-0000000000GF4
XTEAWT-00-000000000BGF4
XTEAWT-00-000000000LGF4
XTEAWT-00-000000000HGF4
R3
122
140
XTEAWT-00-0000000000FF4
XTEAWT-00-000000000BFF4
XTEAWT-00-000000000LFF4
XTEAWT-00-000000000HFF4
R2
114
130
XTEAWT-00-0000000000EF4
XTEAWT-00-000000000BEF4
XTEAWT-00-000000000LEF4
XTEAWT-00-000000000HEF4
Q5
107
122
XTEAWT-00-000000000LDF4
XTEAWT-00-000000000HDF4
Q4
100
Q3
85 CRI Minimum
90 CRI Minimum
XTEAWT-00-000000000PDF4
XTEAWT-00-000000000UDF4
114
XTEAWT-00-000000000PCF4
XTEAWT-00-000000000UCF4
93.9
107
XTEAWT-00-000000000PBF4
XTEAWT-00-000000000UBF4
Q2
87.4
99.2
XTEAWT-00-000000000PAF4
XTEAWT-00-000000000UAF4
S3
156
177
XTEAWT-00-0000000000KD1
XTEAWT-00-000000000BKD1
S2
148
168
XTEAWT-00-0000000000JD1
XTEAWT-00-000000000BJD1
XTEAWT-00-000000000LJD1
R5
139
158
XTEAWT-00-0000000000HD1
XTEAWT-00-000000000BHD1
XTEAWT-00-000000000LHD1
R4
130
148
XTEAWT-00-0000000000GD1
XTEAWT-00-000000000BGD1
XTEAWT-00-000000000LGD1
R3
122
140
XTEAWT-00-0000000000FD1
XTEAWT-00-000000000BFD1
XTEAWT-00-000000000LFD1
R2
114
130
XTEAWT-00-0000000000ED1
XTEAWT-00-000000000BED1
XTEAWT-00-000000000LED1
4750 K
4750 K
75 CRI Typical
80 CRI Minimum
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 34).
•
Cree XLamp XT-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
*
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
7
XLamp ® XT-E LED
Flux Characteristics - White (TJ = 85 °C) - continued
Chromaticity
Kit
E4
D2
CCT
Minimum Luminous Flux
(lm) @ 350 mA
Code
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
No Minimum CRI
70 CRI Minimum
S3
156
177
XTEAWT-00-0000000000KE4
XTEAWT-00-000000000BKE4
S2
148
168
XTEAWT-00-0000000000JE4
XTEAWT-00-000000000BJE4
XTEAWT-00-000000000LJE4
R5
139
158
XTEAWT-00-0000000000HE4
XTEAWT-00-000000000BHE4
XTEAWT-00-000000000LHE4
XTEAWT-00-000000000HHE4
R4
130
148
XTEAWT-00-0000000000GE4
XTEAWT-00-000000000BGE4
XTEAWT-00-000000000LGE4
XTEAWT-00-000000000HGE4
R3
122
140
XTEAWT-00-0000000000FE4
XTEAWT-00-000000000BFE4
XTEAWT-00-000000000LFE4
XTEAWT-00-000000000HFE4
R2
114
130
XTEAWT-00-0000000000EE4
XTEAWT-00-000000000BEE4
XTEAWT-00-000000000LEE4
XTEAWT-00-000000000HEE4
Q5
107
122
XTEAWT-00-000000000LDE4
XTEAWT-00-000000000HDE4
Q4
100
Q3
85 CRI Minimum
90 CRI Minimum
XTEAWT-00-000000000PDE4
XTEAWT-00-000000000UDE4
114
XTEAWT-00-000000000PCE4
XTEAWT-00-000000000UCE4
93.9
107
XTEAWT-00-000000000PBE4
XTEAWT-00-000000000UBE4
Q2
87.4
99.2
XTEAWT-00-000000000PAE4
XTEAWT-00-000000000UAE4
S3
156
177
XTEAWT-00-0000000000KD2
XTEAWT-00-000000000BKD2
S2
148
168
XTEAWT-00-0000000000JD2
XTEAWT-00-000000000BJD2
R5
139
158
XTEAWT-00-0000000000HD2
XTEAWT-00-000000000BHD2
XTEAWT-00-000000000LHD2
R4
130
148
XTEAWT-00-0000000000GD2
XTEAWT-00-000000000BGD2
XTEAWT-00-000000000LGD2
R3
122
140
XTEAWT-00-0000000000FD2
XTEAWT-00-000000000BFD2
XTEAWT-00-000000000LFD2
R2
114
130
XTEAWT-00-0000000000ED2
XTEAWT-00-000000000BED2
XTEAWT-00-000000000LED2
Q5
107
122
4500 K
4500 K
Order Codes
75 CRI Typical
80 CRI Minimum
XTEAWT-00-000000000LDD2
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 34).
•
Cree XLamp XT-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
*
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
8
XLamp ® XT-E LED
Flux Characteristics - White (TJ = 85 °C) - continued
Chromaticity
Kit
C2
C3
CCT
Minimum Luminous Flux
(lm) @ 350 mA
Order Codes
Code
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
No Minimum CRI
70 CRI Minimum
S3
156
177
XTEAWT-00-0000000000KC2
XTEAWT-00-000000000BKC2
S2
148
168
XTEAWT-00-0000000000JC2
XTEAWT-00-000000000BJC2
XTEAWT-00-000000000LJC2
R5
139
158
XTEAWT-00-0000000000HC2
XTEAWT-00-000000000BHC2
XTEAWT-00-000000000LHC2
R4
130
148
XTEAWT-00-0000000000GC2
XTEAWT-00-000000000BGC2
XTEAWT-00-000000000LGC2
R3
122
140
XTEAWT-00-0000000000FC2
XTEAWT-00-000000000BFC2
XTEAWT-00-000000000LFC2
R2
114
130
XTEAWT-00-0000000000EC2
XTEAWT-00-000000000BEC2
XTEAWT-00-000000000LEC2
S3
156
177
XTEAWT-00-0000000000KC3
XTEAWT-00-000000000BKC3
S2
148
168
XTEAWT-00-0000000000JC3
XTEAWT-00-000000000BJC3
XTEAWT-00-000000000LJC3
R5
139
158
XTEAWT-00-0000000000HC3
XTEAWT-00-000000000BHC3
XTEAWT-00-000000000LHC3
R4
130
148
XTEAWT-00-0000000000GC3
XTEAWT-00-000000000BGC3
XTEAWT-00-000000000LGC3
R3
122
140
XTEAWT-00-0000000000FC3
XTEAWT-00-000000000BFC3
XTEAWT-00-000000000LFC3
R2
114
130
XTEAWT-00-0000000000EC3
XTEAWT-00-000000000BEC3
XTEAWT-00-000000000LEC3
4500 K
4300 K
75 CRI Typical
80 CRI Minimum
85 CRI Minimum
90 CRI Minimum
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 34).
•
Cree XLamp XT-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
*
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
9
XLamp ® XT-E LED
Flux Characteristics - White (TJ = 85 °C) - continued
Chromaticity
Kit
F5
E5
CCT
4250 K
4000 K
Minimum Luminous Flux
(lm) @ 350 mA
Order Codes
Code
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
No Minimum CRI
S3
156
177
XTEAWT-00-0000000000KF5
S2
148
168
XTEAWT-00-0000000000JF5
XTEAWT-00-000000000BJF5
R5
139
158
XTEAWT-00-0000000000HF5
XTEAWT-00-000000000BHF5
XTEAWT-00-000000000LHF5
R4
130
148
XTEAWT-00-0000000000GF5
XTEAWT-00-000000000BGF5
XTEAWT-00-000000000LGF5
XTEAWT-00-000000000HGF5
R3
122
140
XTEAWT-00-0000000000FF5
XTEAWT-00-000000000BFF5
XTEAWT-00-000000000LFF5
XTEAWT-00-000000000HFF5
R2
114
130
XTEAWT-00-0000000000EF5
XTEAWT-00-000000000BEF5
XTEAWT-00-000000000LEF5
XTEAWT-00-000000000HEF5
Q5
107
122
XTEAWT-00-0000000000DF5
XTEAWT-00-000000000BDF5
XTEAWT-00-000000000LDF5
XTEAWT-00-000000000HDF5
Q4
100
114
XTEAWT-00-000000000LCF5
XTEAWT-00-000000000HCF5
Q3
93.9
Q2
70 CRI Minimum
75 CRI Typical
80 CRI Minimum
85 CRI Minimum
90 CRI Minimum
XTEAWT-00-000000000PCF5
XTEAWT-00-000000000UCF5
107
XTEAWT-00-000000000PBF5
XTEAWT-00-000000000UBF5
87.4
99.2
XTEAWT-00-000000000PAF5
XTEAWT-00-000000000UAF5
P4
80.6
91.5
XTEAWT-00-000000000P9F5
XTEAWT-00-000000000U9F5
S3
156
177
XTEAWT-00-0000000000KE5
S2
148
168
XTEAWT-00-0000000000JE5
XTEAWT-00-000000000BJE5
R5
139
158
XTEAWT-00-0000000000HE5
XTEAWT-00-000000000BHE5
XTEAWT-00-000000000LHE5
R4
130
148
XTEAWT-00-0000000000GE5
XTEAWT-00-000000000BGE5
XTEAWT-00-000000000LGE5
XTEAWT-00-000000000HGE5
R3
122
140
XTEAWT-00-0000000000FE5
XTEAWT-00-000000000BFE5
XTEAWT-00-000000000LFE5
XTEAWT-00-000000000HFE5
R2
114
130
XTEAWT-00-0000000000EE5
XTEAWT-00-000000000BEE5
XTEAWT-00-000000000LEE5
XTEAWT-00-000000000HEE5
Q5
107
122
XTEAWT-00-0000000000DE5
XTEAWT-00-000000000BDE5
XTEAWT-00-000000000LDE5
XTEAWT-00-000000000HDE5
Q4
100
114
XTEAWT-00-000000000LCE5
XTEAWT-00-000000000HCE5
XTEAWT-00-000000000PCE5
XTEAWT-00-000000000UCE5
Q3
93.9
107
XTEAWT-00-000000000PBE5
XTEAWT-00-000000000UBE5
Q2
87.4
99.2
XTEAWT-00-000000000PAE5
XTEAWT-00-000000000UAE5
P4
80.6
91.5
XTEAWT-00-000000000P9E5
XTEAWT-00-000000000U9E5
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 34).
•
Cree XLamp XT-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
*
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
10
XLamp ® XT-E LED
Flux Characteristics - White (TJ = 85 °C) - continued
Chromaticity
Minimum Luminous Flux
(lm) @ 350 mA
Kit
Code
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
No Minimum CRI
70 CRI Minimum
80 CRI Typical
R5
139
158
XTEAWT-00-0000000000HF6
XTEAWT-00-000000000BHF6
XTEAWT-00-000000000LHF6
R4
130
148
XTEAWT-00-0000000000GF6
XTEAWT-00-000000000BGF6
XTEAWT-00-000000000LGF6
R3
122
140
XTEAWT-00-0000000000FF6
XTEAWT-00-000000000BFF6
XTEAWT-00-000000000LFF6
XTEAWT-00-000000000HFF6
R2
114
130
XTEAWT-00-0000000000EF6
XTEAWT-00-000000000BEF6
XTEAWT-00-000000000LEF6
XTEAWT-00-000000000HEF6
Q5
107
122
XTEAWT-00-0000000000DF6
XTEAWT-00-000000000BDF6
XTEAWT-00-000000000LDF6
XTEAWT-00-000000000HDF6
Q4
100
114
XTEAWT-00-000000000LCF6
XTEAWT-00-000000000HCF6
Q3
93.9
Q2
F6
E6
CCT
3750 K
3500 K
Order Codes
80 CRI Minimum
85 CRI Minimum
90 CRI Minimum
XTEAWT-00-000000000PCF6
XTEAWT-000000-00000UCF6
107
XTEAWT-00-000000000PBF6
XTEAWT-000000-00000UBF6
87.4
99.2
XTEAWT-00-000000000PAF6
XTEAWT-000000-00000UAF6
P4
80.6
91.5
XTEAWT-00-000000000P9F6
XTEAWT-000000-00000U9F6
R5
139
158
XTEAWT-00-0000000000HE6
XTEAWT-00-000000000BHE6
XTEAWT-00-000000000LHE6
R4
130
148
XTEAWT-00-0000000000GE6
XTEAWT-00-000000000BGE6
XTEAWT-00-000000000LGE6
R3
122
140
XTEAWT-00-0000000000FE6
XTEAWT-00-000000000BFE6
XTEAWT-00-000000000LFE6
XTEAWT-00-000000000HFE6
R2
114
130
XTEAWT-00-0000000000EE6
XTEAWT-00-000000000BEE6
XTEAWT-00-000000000LEE6
XTEAWT-00-000000000HEE6
Q5
107
122
XTEAWT-00-0000000000DE6
XTEAWT-00-000000000BDE6
XTEAWT-00-000000000LDE6
XTEAWT-00-000000000HDE6
Q4
100
114
XTEAWT-00-000000000LCE6
XTEAWT-00-000000000HCE6
XTEAWT-00-000000000PCE6
XTEAWT-000000-00000UCE6
Q3
93.9
107
XTEAWT-00-000000000PBE6
XTEAWT-000000-00000UBE6
Q2
87.4
99.2
XTEAWT-00-000000000PAE6
XTEAWT-000000-00000UAE6
P4
80.6
91.5
XTEAWT-00-000000000P9E6
XTEAWT-000000-00000U9E6
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 34).
•
Cree XLamp XT-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
*
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
11
XLamp ® XT-E LED
Flux Characteristics - White (TJ = 85 °C) - continued
Chromaticity
Minimum Luminous Flux
(lm) @ 350 mA
Kit
Code
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
No Minimum CRI
70 CRI Minimum
80 CRI Typical
R4
130
148
XTEAWT-00-0000000000GF7
XTEAWT-00-000000000BGF7
XTEAWT-00-000000000LGF7
R3
122
140
XTEAWT-00-0000000000FF7
XTEAWT-00-000000000BFF7
XTEAWT-00-000000000LFF7
XTEAWT-00-000000000HFF7
R2
114
130
XTEAWT-00-0000000000EF7
XTEAWT-00-000000000BEF7
XTEAWT-00-000000000LEF7
XTEAWT-00-000000000HEF7
Q5
107
122
XTEAWT-00-0000000000DF7
XTEAWT-00-000000000BDF7
XTEAWT-00-000000000LDF7
XTEAWT-00-000000000HDF7
Q4
100
114
XTEAWT-00-0000000000CF7
XTEAWT-00-000000000BCF7
XTEAWT-00-000000000LCF7
XTEAWT-00-000000000HCF7
Q3
93.9
107
XTEAWT-00-000000000LBF7
XTEAWT-00-000000000HBF7
Q2
87.4
P4
F7
E7
CCT
3250 K
3000 K
Order Codes
80 CRI Minimum
85 CRI Minimum
90 CRI Minimum
XTEAWT-00-000000000PBF7
XTEAWT-000000-00000UBF7
99.2
XTEAWT-00-000000000PAF7
XTEAWT-000000-00000UAF7
80.6
91.5
XTEAWT-00-000000000P9F7
XTEAWT-000000-00000U9F7
P3
73.9
83.9
XTEAWT-00-000000000P8F7
XTEAWT-000000-00000U8F7
R4
130
148
XTEAWT-00-0000000000GE7
XTEAWT-00-000000000BGE7
XTEAWT-00-000000000LGE7
R3
122
140
XTEAWT-00-0000000000FE7
XTEAWT-00-000000000BFE7
XTEAWT-00-000000000LFE7
XTEAWT-00-000000000HFE7
R2
114
130
XTEAWT-00-0000000000EE7
XTEAWT-00-000000000BEE7
XTEAWT-00-000000000LEE7
XTEAWT-00-000000000HEE7
Q5
107
122
XTEAWT-00-0000000000DE7
XTEAWT-00-000000000BDE7
XTEAWT-00-000000000LDE7
XTEAWT-00-000000000HDE7
Q4
100
114
XTEAWT-00-0000000000CE7
XTEAWT-00-000000000BCE7
XTEAWT-00-000000000LCE7
XTEAWT-00-000000000HCE7
Q3
93.9
107
XTEAWT-00-000000000LBE7
XTEAWT-00-000000000HBE7
XTEAWT-00-000000000PBE7
XTEAWT-000000-00000UBE7
Q2
87.4
99.2
XTEAWT-00-000000000PAE7
XTEAWT-000000-00000UAE7
P4
80.6
91.5
XTEAWT-00-000000000P9E7
XTEAWT-000000-00000U9E7
P3
73.9
83.9
XTEAWT-00-000000000P8E7
XTEAWT-000000-00000U8E7
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 34).
•
Cree XLamp XT-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
*
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
12
XLamp ® XT-E LED
Flux Characteristics - White (TJ = 85 °C) - continued
Chromaticity
Minimum Luminous Flux
(lm) @ 350 mA
Kit
Code
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
No Minimum CRI
70 CRI Minimum
80 CRI Typical
R3
122
140
XTEAWT-00-0000000000FF8
XTEAWT-00-000000000BFF8
XTEAWT-00-000000000LFF8
R2
114
130
XTEAWT-00-0000000000EF8
XTEAWT-00-000000000BEF8
XTEAWT-00-000000000LEF8
XTEAWT-00-000000000HEF8
Q5
107
122
XTEAWT-00-0000000000DF8
XTEAWT-00-000000000BDF8
XTEAWT-00-000000000LDF8
XTEAWT-00-000000000HDF8
Q4
100
114
XTEAWT-00-0000000000CF8
XTEAWT-00-000000000BCF8
XTEAWT-00-000000000LCF8
XTEAWT-00-000000000HCF8
Q3
93.9
107
XTEAWT-00-0000000000BF8
XTEAWT-00-000000000BBF8
XTEAWT-00-000000000LBF8
XTEAWT-00-000000000HBF8
XTEAWT-00-000000000PBF8
Q2
87.4
99.2
XTEAWT-00-000000000LAF8
XTEAWT-00-000000000HAF8
XTEAWT-00-000000000PAF8
XTEAWT-000000-00000UAF8
P4
80.6
91.5
XTEAWT-00-000000000P9F8
XTEAWT-000000-00000U9F8
P3
73.9
83.9
XTEAWT-00-000000000P8F8
XTEAWT-000000-00000U8F8
R3
122
140
XTEAWT-00-0000000000FE8
XTEAWT-00-000000000BFE8
XTEAWT-00-000000000LFE8
R2
114
130
XTEAWT-00-0000000000EE8
XTEAWT-00-000000000BEE8
XTEAWT-00-000000000LEE8
XTEAWT-00-000000000HEE8
Q5
107
122
XTEAWT-00-0000000000DE8
XTEAWT-00-000000000BDE8
XTEAWT-00-000000000LDE8
XTEAWT-00-000000000HDE8
Q4
100
114
XTEAWT-00-0000000000CE8
XTEAWT-00-000000000BCE8
XTEAWT-00-000000000LCE8
XTEAWT-00-000000000HCE8
Q3
93.9
107
XTEAWT-00-0000000000BE8
XTEAWT-00-000000000BBE8
XTEAWT-00-000000000LBE8
XTEAWT-00-000000000HBE8
XTEAWT-00-000000000PBE8
Q2
87.4
99.2
XTEAWT-00-000000000LAE8
XTEAWT-00-000000000HAE8
XTEAWT-00-000000000PAE8
XTEAWT-000000-00000UAE8
P4
80.6
91.5
XTEAWT-00-000000000P9E8
XTEAWT-000000-00000U9E8
P3
73.9
83.9
XTEAWT-00-000000000P8E8
XTEAWT-000000-00000U8E8
Q4
100
114
XTEAWT-00-000000000BCEA
Q3
93.9
107
XTEAWT-00-000000000BBEA
XTEAWT-00-000000000HBEA
Q2
87.4
99.2
XTEAWT-00-000000000BAEA
XTEAWT-00-000000000HAEA
P4
80.6
91.5
XTEAWT-00-000000000B9EA
XTEAWT-00-000000000H9EA
P3
73.9
83.9
F8
E8
EA
CCT
2850 K
2700 K
2200 K
Order Codes
80 CRI Minimum
85 CRI Minimum
90 CRI Minimum
XTEAWT-00-000000000H8EA
Notes:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 34).
•
Cree XLamp XT-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
*
Flux values @ 25 °C are calculated and for reference only.
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
13
XLamp ® XT-E LED
Flux Characteristics - Royal Blue (TJ = 85 °C)
The following tables provide order codes for XLamp XT-E royal blue LEDs. For a complete description of the order code nomenclature,
please see the Bin and Order Code Formats section (page 32).
Dominant Wavelength Range
DWL
Kit
Codes
Min.
Max.
Order Codes, Minimum Radiant Flux @ 350 mA, Tj=85 °C
Group
DWL
(nm)
Group
DWL
(nm)
475 mW - Radiant Flux Group
Code 31(K)
500 mW - Radiant Flux
Group Code 32(L)
525 mW - Radiant Flux Group
Code 33(M)
01
D36
450
D57
465
XTEARY-00-0000-000000K01
XTEARY-00-0000-000000L01
XTEARY-00-0000-000000M01
02
D36
450
D47
460
XTEARY-00-0000-000000K02
XTEARY-00-0000-000000L02
XTEARY-00-0000-000000M02
03
D46
455
D57
465
XTEARY-00-0000-000000K03
XTEARY-00-0000-000000L03
XTEARY-00-0000-000000M03
04
D36
450
D37
455
XTEARY-00-0000-000000K04
XTEARY-00-0000-000000L04
XTEARY-00-0000-000000M04
05
D46
455
D47
460
XTEARY-00-0000-000000K05
XTEARY-00-0000-000000L05
XTEARY-00-0000-000000M05
06
D56
460
D57
465
XTEARY-00-0000-000000K06
XTEARY-00-0000-000000L06
XTEARY-00-0000-000000M06
07
D37
452.5
D46
457.5
XTEARY-00-0000-000000K07
XTEARY-00-0000-000000L07
XTEARY-00-0000-000000M07
08
D47
457.5
D56
462.5
XTEARY-00-0000-000000K08
XTEARY-00-0000-000000L08
XTEARY-00-0000-000000M08
09
D37
452.5
D56
462.5
XTEARY-00-0000-000000K09
XTEARY-00-0000-000000L09
XTEARY-00-0000-000000M09
Dominant Wavelength Range
DWL
Kit
Codes
Min.
Max.
Order Codes, Minimum Radiant Flux @ 350 mA, Tj=85 °C
Group
DWL
(nm)
Group
DWL
(nm)
550 mW - Radiant Flux Group
Code 34(N)
575 mW - Radiant Flux
Group Code 35(P)
600 mW - Radiant Flux Group
Code 36(Q)
01
D36
450
D57
465
XTEARY-00-0000-000000N01
XTEARY-00-0000-000000P01
XTEARY-00-0000-000000Q01
02
D36
450
D47
460
XTEARY-00-0000-000000N02
XTEARY-00-0000-000000P02
XTEARY-00-0000-000000Q02
03
D46
455
D57
465
XTEARY-00-0000-000000N03
XTEARY-00-0000-000000P03
04
D36
450
D37
455
XTEARY-00-0000-000000N04
XTEARY-00-0000-000000P04
05
D46
455
D47
460
XTEARY-00-0000-000000N05
XTEARY-00-0000-000000P05
06
D56
460
D57
465
XTEARY-00-0000-000000N06
07
D37
452.5
D46
457.5
XTEARY-00-0000-000000N07
08
D47
457.5
D56
462.5
XTEARY-00-0000-000000N08
09
D37
452.5
D56
462.5
XTEARY-00-0000-000000N09
XTEARY-00-0000-000000Q04
XTEARY-00-0000-000000P07
XTEARY-00-0000-000000P09
Note:
•
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements, ±2 on CRI measurements and
±1 nm on dominant wavelength measurements.See the Measurements section (page 34).
•
Cree XLamp XT-E LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum
specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order
code.
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
14
XLamp ® XT-E LED
Relative Spectral Power
Relative Spectral Power Distribution - White
100%
Relative Radiant Power
80%
60%
5000 K - 8300 K CCT
2600 K - 3700 K CCT
2200 K CCT
40%
20%
0%
380
430
480
530
580
630
680
730
780
Wavelength (nm)
Relative
Spectral
Power
Relative
Spectral
Power Distribution
- Royal Blue
100%
Relative Radiant Power
80%
60%
Royal Blue
40%
20%
0%
380
430
480
530
580
630
680
730
780
Wavelength (nm)
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
15
XLamp ® XT-E LED
Relative Flux Output vs. Junction Temperature
Relative Luminous Flux vs. Junction Temperature (IF = 350 mA) - White
120%
Relative Luminous Flux
100%
80%
60%
40%
20%
0%
25
50
75
100
125
150
Junction Temperature (ºC)
Relative Flux Output vs. Junction Temperature
Relative Radiant Flux vs. Junction Temperature (IF = 350 mA) - Royal Blue
120%
Relative Radiant Flux
100%
80%
60%
40%
20%
0%
25
50
75
100
125
150
Junction Temperature (ºC)
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
16
XLamp ® XT-E LED
Electrical
Characteristics
(TJ = 85 °C)
Electrical Characteristics
(Tj = 85ºC)
1600
Forward Current (mA)
1400
1200
1000
800
600
400
200
0
2.50
2.75
3.00
3.25
3.50
Forward Voltage (V)
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
17
XLamp ® XT-E LED
Relative Intensity vs. Current (Tj = 85ºC)
Relative Luminous Flux vs. Current (TJ = 85 °C) - White
350%
Relative Luminous Flux
300%
250%
200%
150%
100%
50%
0%
0
200
400
600
800
1000
1200
1400
1600
1200
1400
1600
Forward Current (mA)
Relative Radiant Flux vs. Current (Tj = 85ºC)
Relative Radiant Flux vs. Current (TJ = 85 °C) - Royal Blue
350%
Relative Radiant Flux
300%
250%
200%
150%
100%
50%
0%
0
200
400
600
800
1000
Forward Current (mA)
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
18
XLamp ® XT-E LED
Relative Chromaticity Vs. Current, WW
Relative Chromaticity vs. Current and Temperature (Warm White)
0.020
T = 85 °C
J
0.015
0.010
0.005
ΔCCx
0.000
ΔCCy
-0.005
-0.010
-0.015
-0.020
0
200
400
600
800
1000
1200
1400
1600
Current (mA)
Relative Chromaticity Vs. Temperature WW
0.020
I = 350 mA
F
0.015
0.010
0.005
ΔCCx
0.000
ΔCCy
-0.005
-0.010
-0.015
-0.020
0
20
40
60
80
100
120
140
160
Tsp (°C)
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
19
XLamp ® XT-E LED
Typical Spatial Radiation Pattern
Typical Spatial Distribution - White
100%
Relative Luminous Intensity
80%
60%
40%
20%
-90
-70
-50
-30
-10
0%
10
30
50
70
90
10
30
50
70
90
Angle (º)
Typical Spatial Distribution
Typical Spatial Distribution - Royal Blue
100%
90%
Relative Luminous Intensit
80%
70%
60%
50%
40%
30%
20%
10%
-90
-70
-50
-30
-10
0%
Angle (º)
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
20
XLamp ® XT-E LED
Thermal Design
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
productThermal
to be designed
in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
Design
and optical characteristics.
1600
Maximum Current (mA)
1400
1200
1000
800
600
Rj-a = 10°C/W
400
Rj-a = 15°C/W
Rj-a = 20°C/W
200
Rj-a = 25°C/W
0
0
20
40
60
80
100
120
140
160
Ambient Temperature (ºC)
Performance Groups – Luminous Flux (TJ = 85 °C)
XLamp XT-E white LEDs are tested for luminous flux and placed into one of the following luminous-flux groups.
Group Code
Min. Luminous Flux
Max. Luminous Flux
P3
73.9
80.6
P4
80.6
87.4
Q2
87.4
93.9
Q3
93.9
100
Q4
100
107
Q5
107
114
R2
114
122
R3
122
130
R4
130
139
R5
139
148
S2
148
156
S3
156
164
S4
164
172
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
21
XLamp ® XT-E LED
Performance Groups – Radiant Flux (TJ = 85 °C)
XLamp XT-E royal blue LEDs are tested for radiant flux and placed into one the following bins.
Group Code
Minimum Radiant Flux
(mW)
Maximum Radiant Flux
(mW)
31 (K)
475
500
32 (L)
500
525
33 (M)
525
550
34 (N)
550
575
35 (P)
575
600
36 (Q)
600
625
Performance Groups – Dominant Wavelength (TJ = 85 °C)
XLamp XT-E royal blue LEDs are tested for dominant wavelength and placed into one of the regions defined by the following bounding
coordinates.
Group Code
Minimum Dominant
Wavelength (nm)
Maximum Dominant
Wavelength (nm)
D36
450.0
452.5
D37
452.5
455.0
D46
455.0
457.5
D47
457.5
460.0
D56
460.0
462.5
D57
462.5
465.0
Performance Groups – Forward Voltage (TJ = 85 °C)
XLamp XT-E white and royal blue LEDs are tested for forward voltage and placed into one the following voltage bins.
Group Code
Minimum Forward
Voltage (V)
Maximum Forward
Voltage (V)
F
2.75
3.00
G
3.00
3.25
H
3.25
3.50
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
22
XLamp ® XT-E LED
Performance Groups – Chromaticity
Region
0A
0R
1A
1R
2A
2R
3A
3R
4A
4R
x
y
0.2950
0.2970
0.2920
0.3060
0.2984
0.3133
0.3009
0.2980
0.2950
0.2970
0.3009
0.3042
0.3037
0.2937
0.3048
0.3130
0.3144
0.3186
0.3068
0.3068
0.3144
0.3186
0.3161
0.3059
0.3093
Region
x
y
0.2920
0.3060
0.2895
0.3135
0.2962
0.3220
0.3042
0.2984
0.2880
0.2895
0.2870
0.3210
0.2937
0.3312
0.2962
0.3220
0.3207
0.3028
0.3304
0.3290
0.3115
0.3391
0.3130
0.3290
0.3213
0.3373
0.3113
0.3048
0.3207
0.3130
0.3113
0.3005
0.3415
0.3099
0.3099
0.3509
0.3196
0.3602
0.3115
0.3391
0.3205
0.3481
0.2993
0.3028
0.3304
0.3115
0B
0S
1B
1S
Region
x
y
0.2984
0.3133
0.2962
0.3220
0.3028
0.3304
0.3133
0.3048
0.3135
0.2962
0.2937
0.3312
0.3005
0.3415
0.3028
0.3304
0.3115
0.3205
0C
0T
1C
1T
Region
x
y
0.2984
0.3133
0.3048
0.3207
0.3068
0.3113
0.3207
0.3009
0.3042
0.3220
0.3037
0.2937
0.3009
0.3042
0.3068
0.3113
0.3093
0.2993
0.3391
0.3130
0.3290
0.3481
0.3213
0.3373
0.3221
0.3261
0.3290
0.3144
0.3186
0.3509
0.3144
0.3186
0.3221
0.3261
0.3231
0.3120
0.3391
0.3161
0.3059
0D
0U
1D
1U
0.3215
0.3350
0.3207
0.3462
0.3290
0.3538
0.3290
0.3417
0.3290
0.3417
0.3290
0.3538
0.3376
0.3616
0.3371
0.3490
0.3290
0.3300
0.3290
0.3417
0.3371
0.3490
0.3366
0.3369
0.3222
0.3243
0.3215
0.3350
0.3290
0.3417
0.3290
0.3300
0.3222
0.3243
0.3196
0.3602
0.3290
0.3690
0.3290
0.3300
0.3290
0.3300
0.3290
0.3690
0.3381
0.3762
0.3366
0.3369
0.3290
0.3180
0.3290
0.3538
0.3376
0.3616
0.3361
0.3245
0.3231
0.3120
0.3207
0.3462
0.3290
0.3538
0.3290
0.3180
0.3371
0.3490
0.3376
0.3616
0.3463
0.3687
0.3451
0.3554
0.3451
0.3554
0.3463
0.3687
0.3551
0.3760
0.3533
0.3620
0.3440
0.3427
0.3451
0.3554
0.3533
0.3620
0.3515
0.3487
0.3366
0.3369
0.3371
0.3490
0.3451
0.3554
0.3440
0.3427
0.3366
0.3369
0.3381
0.3762
0.3480
0.3840
0.3440
0.3428
0.3440
0.3428
0.3480
0.3840
0.3571
0.3907
0.3515
0.3487
0.3429
0.3307
0.3463
0.3687
0.3551
0.3760
0.3495
0.3339
0.3361
0.3245
0.3376
0.3616
0.3463
0.3687
0.3429
0.3307
0.3530
0.3597
0.3548
0.3736
0.3641
0.3804
0.3615
0.3659
0.3615
0.3659
0.3641
0.3804
0.3736
0.3874
0.3702
0.3722
0.3590
0.3521
0.3615
0.3659
0.3702
0.3722
0.3670
0.3578
0.3512
0.3465
0.3530
0.3597
0.3615
0.3659
0.3590
0.3521
0.3512
0.3465
0.3571
0.3907
0.3668
0.3957
0.3590
0.3521
0.3590
0.3521
0.3668
0.3957
0.3771
0.4034
0.3670
0.3578
0.3567
0.3389
0.3641
0.3804
0.3736
0.3874
0.3640
0.3440
0.3495
0.3339
0.3548
0.3736
0.3641
0.3804
0.3567
0.3389
2B
2S
3B
3S
4B
4S
2C
2T
3C
3T
4C
4T
2D
2U
3D
3U
4D
4U
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
23
XLamp ® XT-E LED
Performance Groups – Chromaticity (continued)
Region
5A
5A1
5B1
5C1
5D1
5R
6A
6A1
6B1
6C1
x
y
0.3702
0.3722
0.3825
0.3798
0.3783
0.3646
Region
5B
x
y
0.3736
0.3874
0.3870
0.3958
0.3825
0.3798
Region
5C
x
y
0.3870
0.3958
0.4006
0.4044
0.3951
0.3876
Region
5D
x
y
0.3825
0.3798
0.3951
0.3876
0.3898
0.3716
0.3670
0.3578
0.3702
0.3722
0.3825
0.3798
0.3783
0.3646
0.3670
0.3578
0.3686
0.3649
0.3744
0.3685
0.3726
0.3612
0.3686
0.3649
0.3702
0.3722
0.3763
0.3760
0.3744
0.3685
0.3744
0.3685
0.3763
0.3760
0.3825
0.3798
0.3804
0.3721
0.3726
0.3612
0.3744
0.3685
0.3804
0.3721
0.3783
0.3646
0.3702
0.3722
0.3719
0.3797
0.3782
0.3837
0.3763
0.3760
0.3719
0.3797
0.3736
0.3874
0.3802
0.3916
0.3782
0.3837
0.3782
0.3837
0.3802
0.3916
0.3869
0.3958
0.3847
0.3877
0.3763
0.3760
0.3782
0.3837
0.3847
0.3877
0.3825
0.3798
0.3825
0.3798
0.3847
0.3877
0.3912
0.3917
0.3887
0.3836
0.3847
0.3877
0.3869
0.3958
0.3937
0.4001
0.3912
0.3917
0.3912
0.3917
0.3937
0.4001
0.4006
0.4044
0.3978
0.3958
0.3887
0.3836
0.3912
0.3917
0.3978
0.3958
0.3950
0.3875
0.3783
0.3646
0.3804
0.3721
0.3863
0.3758
0.3840
0.3681
0.3804
0.3721
0.3825
0.3798
0.3887
0.3836
0.3863
0.3758
0.3863
0.3758
0.3887
0.3836
0.3950
0.3875
0.3924
0.3794
0.3840
0.3681
0.3863
0.3758
0.3924
0.3794
0.3898
0.3716
0.3670
0.3578
0.3771
0.4034
0.3916
0.4127
0.3783
0.3646
0.3783
0.3646
0.3916
0.4127
0.4064
0.4221
0.3898
0.3716
0.3743
0.3502
0.3869
0.3958
0.4006
0.4044
0.3848
0.3565
0.3640
0.3440
0.3736
0.3874
0.3869
0.3958
0.3743
0.3502
0.3941
0.3848
0.3996
0.4015
0.4146
0.4089
0.4080
0.3916
0.4080
0.3916
0.4146
0.4089
0.4299
0.4165
0.4221
0.3985
0.4017
0.3752
0.4080
0.3916
0.4221
0.3985
0.4147
0.3814
0.3889
0.369
0.3941
0.3848
0.4080
0.3916
0.4017
0.3752
0.3889
0.3690
0.3915
0.3768
0.3981
0.3800
0.4080
0.3916
0.3915
0.3768
0.3941
0.3848
0.4010
0.3882
0.3981
0.3800
0.3981
0.3800
0.4010
0.3882
0.4080
0.3916
0.4048
0.3832
0.3953
0.3720
0.3981
0.3800
0.4048
0.3832
0.4017
0.3751
0.3941
0.3848
0.3968
0.3930
0.4040
0.3966
0.4010
0.3882
0.3968
0.3930
0.3996
0.4015
0.4071
0.4052
0.4040
0.3966
0.4040
0.3966
0.4071
0.4052
0.4146
0.4089
0.4113
0.4001
0.4010
0.3882
0.4040
0.3966
0.4113
0.4001
0.4080
0.3916
0.4080
0.3916
0.4113
0.4001
0.4186
0.4037
0.4150
0.3950
0.4113
0.4001
0.4146
0.4089
0.4222
0.4127
0.4186
0.4037
0.4186
0.4037
0.4222
0.4127
0.4299
0.4165
0.4259
0.4073
0.4150
0.3950
0.4186
0.4037
0.4259
0.4073
0.4221
0.3984
5A2
5B2
5C2
5D2
5S
6B
6A2
6B2
6C2
5A3
5B3
5C3
5D3
5T
6C
6A3
6B3
6C3
5A4
5B4
5C4
5D4
5U
6D
6A4
6B4
6C4
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
24
XLamp ® XT-E LED
Performance Groups – Chromaticity (continued)
Region
6D1
6R
7A
7A1
7B1
7C1
7D1
8A
8A1
8B1
x
y
0.4017
0.3751
0.4048
0.3832
0.4116
0.3865
0.4082
0.3889
0.4017
0.3751
0.3957
0.3596
0.3840
0.3540
0.4221
0.4342
0.4260
0.3853
0.4147
0.3814
0.4147
0.3814
0.4183
0.3898
0.4242
0.3919
Region
x
y
0.4048
0.3832
0.4080
0.3916
0.4150
0.3950
0.3782
0.4116
0.3690
0.4054
0.4217
0.4273
0.4146
0.4089
0.3996
0.4015
0.3985
0.4299
0.4028
0.4430
0.4342
0.4028
0.4221
0.3985
0.4183
0.3898
0.4221
0.3984
0.4281
0.4006
6D2
6S
7B
7A2
Region
x
y
0.4116
0.3865
0.4150
0.3950
0.4221
0.3984
0.3865
0.4183
0.4191
0.4217
0.4382
0.4356
0.4299
0.4165
0.4146
0.4089
0.4165
0.4430
0.4212
0.4562
0.4465
0.4071
0.4342
0.4028
0.4242
0.3919
0.4281
0.4006
0.4342
0.4028
6D3
6T
7C
7A3
Region
x
y
0.4082
0.3782
0.4116
0.3865
0.4183
0.3898
0.3898
0.4147
0.3814
0.4273
0.4017
0.3751
0.4147
0.3814
0.4077
0.3652
0.3957
0.3596
0.4212
0.4342
0.4028
0.426
0.4465
0.4071
0.4373
0.3893
0.4260
0.3853
0.4203
0.3833
0.4242
0.3919
0.4300
0.3939
6D4
6U
7D
7A4
0.4203
0.3833
0.4242
0.3919
0.4300
0.3939
0.4259
0.3853
0.4221
0.3984
0.4259
0.4073
0.4322
0.4096
0.4281
0.4006
0.4259
0.4073
0.4299
0.4165
0.4364
0.4188
0.4322
0.4096
0.4322
0.4096
0.4364
0.4188
0.4430
0.4212
0.4385
0.4119
0.4281
0.4006
0.4322
0.4096
0.4385
0.4119
0.4342
0.4028
0.4342
0.4028
0.4385
0.4119
0.4449
0.4141
0.4403
0.4049
0.4385
0.4119
0.4430
0.4212
0.4496
0.4236
0.4449
0.4141
0.4449
0.4141
0.4496
0.4236
0.4562
0.4260
0.4513
0.4164
0.4403
0.4049
0.4449
0.4141
0.4513
0.4164
0.4465
0.4071
0.4259
0.3853
0.4300
0.3939
0.4359
0.3960
0.4316
0.3873
0.4300
0.3939
0.4342
0.4028
0.4403
0.4049
0.4359
0.3960
0.4359
0.3960
0.4403
0.4049
0.4465
0.4071
0.4418
0.3981
0.4316
0.3873
0.4359
0.3960
0.4418
0.3981
0.4373
0.3893
0.4465
0.4071
0.4562
0.4260
0.4687
0.4289
0.4582
0.4099
0.4582
0.4099
0.4687
0.4289
0.4813
0.4319
0.4700
0.4126
0.4483
0.3918
0.4582
0.4099
0.4700
0.4126
0.4593
0.3944
0.4373
0.3893
0.4465
0.4071
0.4582
0.4099
0.4483
0.3918
0.4373
0.3893
0.4418
0.3981
0.4475
0.3994
0.4428
0.3906
0.4418
0.3981
0.4465
0.4071
0.4523
0.4085
0.4475
0.3994
0.4475
0.3994
0.4523
0.4085
0.4582
0.4099
0.4532
0.4008
7B2
7C2
7D2
8B
8A2
7B3
7C3
7D3
8C
8A3
7B4
7C4
7D4
8D
8A4
0.4428
0.3906
0.4475
0.3994
0.4532
0.4008
0.4483
0.3919
0.4465
0.4071
0.4513
0.4164
0.4573
0.4178
0.4523
0.4085
0.4513
0.4164
0.4562
0.4260
0.4624
0.4274
0.4573
0.4178
0.4573
0.4178
0.4624
0.4274
0.4687
0.4289
0.4634
0.4193
0.4523
0.4085
0.4573
0.4178
0.4634
0.4193
0.4582
0.4099
8B2
8B3
8B4
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
25
XLamp ® XT-E LED
Performance Groups – Chromaticity (continued)
Region
8C1
8D1
9A1
9B1
9C1
9D1
AA1
AB1
AC1
AD1
x
y
0.4582
0.4158
0.4634
0.4252
0.4695
0.4250
0.4641
0.4483
0.4532
0.4008
0.4589
0.4021
0.4538
0.3931
0.4647
0.4706
0.4650
0.3951
0.4593
0.3944
0.4757
0.4222
0.4819
0.4231
0.4762
0.4135
Region
x
y
0.4634
0.4193
0.4687
0.4289
0.4750
0.4304
0.4156
0.4695
0.3919
0.4532
0.4582
0.4099
0.4641
0.4112
0.4589
0.4021
0.4035
0.4700
0.4043
0.4761
0.4706
0.4043
0.4647
0.4035
0.4813
0.4319
0.4877
0.4327
0.4819
0.4231
8C2
8D2
9A2
9B2
Region
x
y
0.4695
0.4207
0.4750
0.4304
0.4813
0.4319
0.4207
0.4756
0.4008
0.4589
0.4641
0.4112
0.4700
0.4126
0.4646
0.4034
0.4126
0.4762
0.4135
0.4823
0.4765
0.4051
0.4706
0.4043
0.4762
0.4135
0.4942
0.4335
0.4882
0.4239
8C3
8D3
9A3
9B3
Region
x
y
0.4641
0.4112
0.4695
0.4207
0.4756
0.4221
0.4221
0.4700
0.4126
0.4021
0.4538
0.3931
0.4589
0.4021
0.4646
0.4034
0.4593
0.3944
0.4135
0.4706
0.4043
0.4144
0.4765
0.4051
0.4708
0.3959
0.4650
0.3951
0.4819
0.4231
0.4882
0.4239
0.4823
0.4144
8C4
8D4
9A4
9B4
0.4700
0.4126
0.4757
0.4223
0.4819
0.4231
0.4725
0.4135
0.4882
0.4239
0.4942
0.4335
0.5006
0.4342
0.4945
0.4248
0.4945
0.4248
0.5006
0.4342
0.5070
0.4350
0.5008
0.4256
0.4885
0.4153
0.4945
0.4248
0.5008
0.4256
0.4946
0.4162
0.4823
0.4144
0.4882
0.4239
0.4945
0.4248
0.4885
0.4153
0.4765
0.4051
0.4823
0.4144
0.4885
0.4153
0.4765
0.4051
0.4825
0.4059
0.4885
0.4153
0.4946
0.4162
0.4825
0.4059
0.4765
0.3966
0.4825
0.4059
0.4884
0.4068
0.4765
0.3966
9C2
9D2
9C3
9D3
9C4
9D4
0.4708
0.3959
0.4765
0.4051
0.4825
0.4059
0.4706
0.3959
0.4822
0.3973
0.4884
0.4067
0.4942
0.4066
0.4879
0.3972
0.4884
0.4067
0.4946
0.4162
0.5006
0.4160
0.4942
0.4066
0.4942
0.4066
0.5006
0.4160
0.5066
0.4158
0.5001
0.4064
0.4879
0.3972
0.4942
0.4066
0.5001
0.4064
0.4936
0.3970
0.4946
0.4162
0.5008
0.4256
0.5069
0.4254
0.5006
0.4160
0.5008
0.4256
0.5070
0.4350
0.5133
0.4348
0.5069
0.4254
0.5069
0.4254
0.5133
0.4348
0.5196
0.4346
0.5131
0.4252
0.5006
0.4160
0.5069
0.4254
0.5131
0.4252
0.5066
0.4158
0.5066
0.4067
0.5131
0.4252
0.5192
0.4250
0.5126
0.4156
0.5131
0.4162
0.5196
0.4346
0.5258
0.4343
0.5192
0.4250
0.5192
0.4160
0.5258
0.4343
0.5321
0.4341
0.5253
0.4248
AA2
AB2
AC2
AA3
AB3
AC3
AA4
AB4
AC4
0.5126
0.4066
0.5192
0.4250
0.5253
0.4248
0.5186
0.4154
0.4936
0.3970
0.5001
0.4064
0.5059
0.4062
0.4993
0.3969
0.5001
0.4064
0.5066
0.4158
0.5126
0.4156
0.5059
0.4062
0.5059
0.4062
0.5126
0.4156
0.5186
0.4154
0.5118
0.4061
0.4993
0.3969
0.5059
0.4062
0.5118
0.4061
0.5050
0.3967
AD2
AD3
AD4
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
26
XLamp ® XT-E LED
Cree’s Standard White Chromaticity Regions Plotted on the CIE 1931 Curve
ANSI Cool White
0.40
5000 K
0.39
5700 K
0.38
3S
0.37
6500 K
2T
0.36
0.35
CCy
3B
2S
2C
1T
8000 K
1S
0.34
0T
0.33
0C
1D
2U
ANSI
C78.377A
2R
1U
0D
1R
0A
0.30
3R
2A
1A
0B
0.31
2D
1C
1B
0S
0.32
3A
2B
0U
0R
0.29
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.28
CCx
ANSI Neutral White and ANSI Warm White
0.46
0.45
2700 K
3000 K
0.44
0.43
3500 K
0.42
4000 K
CCy
7B3
7B2
0.41
6C3
4500 K
6C2
6B3
0.40
6B2
5C3
5000 K
0.39
5B3
5C4
5B4
0.38
5B1
4C
0.37
5A2
4B
7A1
7A4
7A3
7D1
7D2
7D4
7D3
8A1
8A3
8A2
8A4
4D
8D1
8B4
8D2
8C2
8C1
8C3
8C4
8D3
8D4
6D4
6D1
6A4
5D4
6A1
5D1
ANSI
C78.377A
5A4
3C
0.36
5D3
5D2
5A3
6D2
6A3
6A2
7A2
6D3
6B1
5C1
5B2
6C1
6B4
5C2
7C1
7B4
7B1
6C4
8B1
7C4
8B3
8B2
7C3
7C2
5A1
3B
4A
3D
0.35
3A
0.34
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.33
CCx
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
27
XLamp ® XT-E LED
Cree’s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions
0.40
0.40
5000 K
0.39
0.38
3S
51
6500 K
0.36
0T
0C
0D
0A
0T
CCy
0.33
2U
ANSI
C78.377A
2R
1U
0S
0.32
0C
0.31
1R
1R
0U
0.36
0.35
0.34
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.30
0.28
0.29
0.28
0.28
0.29
0.29
ANSI
C78.377A
1U
0R
0.29
0.28
2U
2R
1A
0.30
0R
CCx
CCx
0.40
0.40
5000 K
0.39
0.38
0.38
3S
50
6500 K
0.36
1U
0.31
1R
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.28
0.29
0.28
0.28
0.29
0.30
1R
0U
0R
0R
0.29
1U
0D
0.30
0.29
0.28
ANSI
C78.377A
2R
1A
0A
0U
2U
0.36
0A
0.30
0C
0B
1D
0.35
0D
0S
0.32
3R
2A
1B
0.34
0.31
ANSI
C78.377A
2R
1A
0T
0.33
2U
2D
1C
0.33
0C
0B
1D
3A
2B
1S
0.32
0S
0.32
3R
2A
1B
2C
8000 K
0.34
3B
2S
1T
0.31
0T
0.33
3A
2D
1C
2T
E1
0.35
2B
1S
0.36
3B
CCy
8000 K
3S
6500 K
2C
1T
0.34
5700 K
0.37
2T
2S
0.35
5000 K
0.39
5700 K
0.37
CCy
3R
2A
1D
0D
0A
0U
2D
1C
1B
0B
3A
2B
1S
0.33
0.30
3R
2A
1D
1A
1T
0.34
0.32
0B
0.31
1C
1B
0S
0.32
2D
3B
2C
8000 K
3A
2B
3S
2T
2S
0.35
0.31
0.33
0.36
3B
1T
1S
53
6500 K
2C
8000 K
0.34
5700 K
0.37
2T
2S
0.35
CCy
0.38
5700 K
0.37
5000 K
0.39
CCx
CCx
0.40
5000 K
0.39
0.38
5700 K
E2
0.37
6500 K
0.36
3B
2S
0.35
CCy
3S
2T
2C
1T
8000 K
0.34
0T
0.33
0S
0.32
0C
0.31
3R
2A
2U
1D
ANSI
C78.377A
2R
1A
0D
0A
2D
1C
1B
0B
3A
2B
1S
1U
1R
0U
0.30
0R
0.29
0.36
0.35
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.28
CCx
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
28
XLamp ® XT-E LED
Cree’s Outdoor White Kits Plotted on ANSI Standard Chromaticity Regions
0.44
0.44
0.43
6T
4000 K
0.41
4500 K
C1
0.40
4T
4S
0.38
3T
3S
0.37
4B
3C
0.36
3B
5C2
6B2
5C3
6D2
6A3
5B4
5D3 6A2
6D1
5B1
5D2
6A4
4C
6A1
5A3
5D4
5A2
6U
5D1
5A4
6R
5A1
4D
5U
5C1
6C4
6C1
6B4
6B1
5C4
6D3
6D4
5B3
5B2
0.38
3T
5A2
4B
3C
0.36
3B
5A1
4D
4A
3D
0.35
ANSI
C78.377A
5B1
4C
3S
0.37
5C1
5B4
6A2
6D4
6D1
6A4
6A1
6D3
6D2
6A3
6U
6R
5U
5R
4U
3A
0.34
ANSI
C78.377A
4R
3U
3R
0.33
0.44
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.43
0.32
0.32
CCx
CCx
0.44
0.44
0.43
0.43
3500 K
6T
4000 K
0.41
C2
0.40
4500 K
5T
5S
5000 K
0.39
4T
5B2
4S
0.38
3T
5A2
4B
3C
0.36
3B
3D
0.35
4D
4A
5A1
5B3
5B4
5A3
5A4
5C2
5C1
6B2
5C3
6A2
5D3
5D2
5D4 6A1
6D2
6A3
6D1
6A4
5D1
6D3
6D4
0.38
3B
5A2
ANSI
C78.377A
4D
4A
3D
0.35
5B1
4C
4B
3C
0.36
5A1
5C1
5B4
5D2
5A3
5A4
5C4
5D1
5D3
5D4
6A1
6A4
6D3
6D2
6A3
6A2
6C1
6B4
6B1
6C4
6D4
6D1
6U
6R
5U
5R
4U
3A
0.34
3R
0.33
5B2
3T
3S
0.37
6U
5R
4R
3U
5B3
6C3
6C2
6B3
6B2
5C3
5C2
4T
4S
6R
5U
5T
5S
5000 K
0.39
6S
4500 K
D2
0.40
6C4
6C1
6B4
6B1
5C4
0.41
6C3
6C2
6B3
6T
4000 K
4U
3A
0.34
5B1
4C
3S
0.37
6S
3500 K
0.42
CCy
0.42
ANSI
C78.377A
4R
3U
3R
0.33
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.36
0.35
0.33
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.37
0.32
0.32
0.34
CCy
5D4
5D1
5A4
5D3
5D2
5A3
6C4
6C1
6B4
6B1
5C4
6C3
6C2
6B3
6B2
5C3
5C2
4T
4S
3R
0.33
5T
5S
5000 K
0.39
6S
4500 K
D1
0.40
5R
4R
3U
6T
4000 K
0.41
6C3
6C2
6B3
4U
3A
0.34
5B3
5B2
4A
3D
0.35
5T
5S
5000 K
0.39
6S
3500 K
0.42
CCy
0.42
CCy
0.43
3500 K
CCx
CCx
0.44
0.43
3500 K
6T
0.42
0.41
4500 K
C3
4000 K
5T
0.40
5S
5000 K
CCy
0.39
0.38
3T
3S
0.37
4B
3C
0.36
3B
3D
0.35
6B2
6B3
6C3
6C2
6C1
6C4
5B2
5B3
5C2
5C1
5C4
6B1
5R
4U
3A
0.34
4A
5C3
6B4
6D3
6D2
6A3
6D4
5B4
5D3 6A2
6D1
5B1
5D2
6A4
4C
5A3
5D4 6A1
5A2
6U
5D1
5A4
6R
5A1
4D
5U
4T
4S
6S
ANSI
C78.377A
4R
3U
3R
0.33
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.32
CCx
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
29
XLamp ® XT-E LED
Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions
0.46
0.45
2700 K
3000 K
0.44
0.43
0.42
4000 K
0.41
E6
4500 K
E5
0.40
CCy
E7
3500 K
5000 K
0.39
0.38
E3
0.37
E4
6D2
6A3
6A2
7A4
7A1
8B3
8C1
8B4
8C2
8C3
8C4
8D3
8D2
8D4
6A4
6A1
5D4
5D1
ANSI
C78.377A
5A4
3B
8B2
6D1
5D2
5A2
6D4
8D1
8A4
8A1
7D4
7D1
8A3
8A2
7D3
7D2
7A3
7A2
6D3
8B1
7C4
7C1
7B4
7B1
6C1
6B1
5C4
5D3
5A3
4B
3C
5A1
4D
0.36
5B1
6C2
6C4
6B4
5C1
5B4
4C
6B2
5C3
5C2
5B3
5B2
6C3
6B3
7C2
7B3
7B2
7C3
E8
4A
3D
0.35
3A
0.34
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.33
CCx
0.46
0.45
2700 K
3000 K
0.44
0.43
3500 K
0.42
4000 K
0.41
4500 K
CCy
0.40
0.39
F4
0.38
0.37
6B1
5C4
6A2
5D3
7A2
6D3
6D2
6A3
5D2
5A3
5A2
4B
6D4
7A1
7A4
7A3
7D1
7D2
7D4
7D3
8A1
8A2
8A4
8A3
8D1
8B4
8D2
8C1
8C2
8C3
8C4
8D3
8D4
6D1
6A4
5D4
6A1
5D1
ANSI
C78.377A
5A4
4D
3B
5B1
6C1
7C1
7B4
7B1
6C4
6B4
5C1
5B4
3C
0.36
5B3
5B2
4C
6C2
8B1
7C4
8B3
8B2
7C3
7C2
7B3
7B2
6B2
5C3
5C2
F7
6C3
6B3
F5
5000 K
F6
F8
5A1
4A
3D
0.35
3A
0.34
0.49
0.48
0.47
0.46
0.45
0.44
0.43
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34
0.33
0.33
CCx
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
30
XLamp ® XT-E LED
Cree’s 2200 K CCT White Kit Plotted on ANSI Standard Chromaticity Regions
0.45
0.44
3000 K
0.43
0.42
CCy
8B1
7C4
0.41
0.40
7C3
7C2
7D3
8A1
8A3
8A2
8A4
8D1
8B2
8B4
8D2
AB2
AB3
AB4
AC1
2200 K
AC2
8C3
8C2
8B3
EA
2450 K
2700 K
AB1
AC3
AC4
8C4
8C1
AA2
AA3
AD2
AD3
8D3
AA1
AA4
AD1
8D4
AD4
0.39
0.38
0.37
0.55
0.54
0.53
0.52
0.51
0.50
0.49
0.48
0.47
0.46
0.45
0.44
0.36
CCx
Cree’s Standard Chromaticity Kits
The following table provides the chromaticity bins associated with chromaticity kits for XT-E LEDs.
Color
Cool
White
Neutral
White
Warm
White
CCT
Kit
Chromaticity Bins
6200 K
51
0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S
6000 K
53
1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S
6200 K
50
1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D
6500 K
E1
1A, 1B, 1C, 1D
5700 K
E2
2A, 2B, 2C, 2D
5000 K
E3
3A, 3B, 3C, 3D
5000 K
C1
3A, 3B, 3C, 3D, 3R, 3S, 3T, 3U, 4A, 4B, 4R, 4S
4750 K
F4
3C, 3D, 4A, 4B
4750 K
D1
3A, 3B, 3C, 3D, 3R, 3S, 3T, 3U, 4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U
4500 K
E4
4A, 4B, 4C, 4D
4500 K
D2
3C, 3D, 3T, 3U, 4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5R, 5S
4500 K
C2
3C, 3D, 3T, 3U, 4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U
4300 K
C3
4A, 4B, 4C, 4D, 4R, 4S, 4T, 4U, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5R, 5S
4250 K
F5
4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4
4000 K
E5
5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4
3750 K
F6
5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4
3500 K
E6
6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4
6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4
3250 K
F7
3000 K
E7
7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4
2850 K
F8
7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4
2700 K
E8
8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4
2200 K
EA
AA1, AA2, AA3, AA4, AB1, AB2, AB3, AB4, AC1, AC2, AC3, AC4, AD1, AD2, AD3, AD4
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
31
XLamp ® XT-E LED
Bin and Order Code Formats
Bin codes and order codes for XT-E White LEDs are configured in the following manner:
Order CodeBin Code
SSSCCC-BD-HHHH-NNNNVRFGG
Series
XTE = XT-E
Series
XTE = XT-E
Configuration
B: Internal code
D: Reel size
Internal code
Color specification
0: No minimum CRI
B: 70 minimum CRI
L: Standard CRI
H: 80 CRI minimum
P: 85 CRI minimum
U: 90 CRI minimum
Color specification
0: No minimum CRI
B: 70 minimum CRI
L: Standard CRI
H: 80 CRI minimum
P: 85 CRI minimum
U: 90 CRI minimum
Chromaticity kit
Luminous flux group
SSSCCC-B-WWW-FFF-VR-AAAA
Internal code
Flux
Voltage performance group
Voltage specification
Chromaticity bin
Internal code
Color
AWT = White
Color
AWT = White
Bin codes and order codes for XT-E Royal Blue LEDs are configured as follows:
Order CodeBin Code
SSSSCC-BD-HHHH-NNNNNNNNN
Series
XTEA = XT-E
Series
XTEA = XT-E
Configuration
Dominant wavelength group
Kit number
SSSSCC-B-DDD-FFF-NN-NNNN
Internal code
Internal code
Radiant flux group
Color
RY = Royal Blue
Configuration
Color
RY = Royal Blue
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
32
XLamp ® XT-E LED
Reflow Soldering Characteristics
In testing, Cree has found XLamp XT-E LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general
guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
tP
TP
Critical Zone
TL to TP
Temperature
Ramp-up
TL
tS
Tsmax
Tsmin
Ramp-down
ts
Preheat
25
t 25˚C to Peak
Profile Feature
Average Ramp-Up Rate (Tsmax to Tp)
Time
Lead-Free Solder
1.2 °C/second
Preheat: Temperature Min (Tsmin)
120 °C
Preheat: Temperature Max (Tsmax)
170 °C
Preheat: Time (tsmin to tsmax)
65-150 seconds
Time Maintained Above: Temperature (TL)
Time Maintained Above: Time (tL)
217 °C
45-90 seconds
Peak/Classification Temperature (Tp)
235 - 245 °C
Time Within 5 °C of Actual Peak Temperature (tp)
20-40 seconds
Ramp-Down Rate
1 - 6 °C/second
Time 25 °C to Peak Temperature
4 minutes max.
Note: All temperatures refer to the topside of the package, measured on the package body surface.
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
33
XLamp ® XT-E LED
Notes
Measurements
The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely
represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors
that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are
provided for informational purposes only and are not intended as specifications.
Lumen Maintenance
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance.
For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LED junction temperature.
Moisture Sensitivity
Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering.
Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XT-E LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in
conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs
in the original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Documentation sections of www.cree.com.
REACh Compliance
REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to
insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available
upon request.
UL® Recognized Component
Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/
UL 8750.
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
34
XLamp ® XT-E LED
Notes - Continued
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
35
XLamp ® XT-E LED
6
5
6
4
5
NOTICE
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CONTAINED WITHIN ARE THE PROPRIETARY AND
CONTAINED
WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS
PLOT
CONFIDENTIAL
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED
TO ANY INFORMATION OF CREE, INC. THIS PLOT
MAY NOTCONSENT
BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
OF CREE INC.
OF CREE INC.
3
4
REV
Mechanical Dimensions
Thermal vias, if present, are not shown on these drawings.
D
3.30
D
B
REM
C
ADDED O
D
CHANGED VIEWS T
E
CHANGED SO
3.30
All measurements are ±0.13 mm unless otherwise indicated.
.50
3.45
2.36
±0.18
3.45
6
6
2.36
±0.18
.50
.83
5
5
2.30
.50
.83
4
4
.50
2.30
3
3
2
NOTICE
NOTICE
CREE
CONFIDENTIAL.
THIS PLOT AND THE INFORMATION
CREE CONFIDENTIAL. THIS
PLOT
AND THE INFORMATION
CONTAINED
WITHIN
ARE
CONTAINED WITHIN ARE THE PROPRIETARY ANDTHE PROPRIETARY AND
CONFIDENTIAL
INFORMATION
OF CREE, INC. THIS PLOT
CONFIDENTIAL INFORMATION
OF CREE,
INC. THIS PLOT
MAY NOT BE COPIED,
REPRODUCED
MAY NOT BE COPIED, REPRODUCED
OR DISCLOSED
TO ANYOR DISCLOSED TO ANY
UNAUTHORIZED
PERSON
WITHOUT
THE WRITTEN CONSENT
UNAUTHORIZED PERSON
WITHOUT
THE WRITTEN
CONSENT
3.45
OF
CREE
INC.
3.45
OF CREE INC.
2
6
REVISONS
NOTICE
C
REV AND THE INFORMATION DESCRIPTION
CREE CONFIDENTIAL.CTHIS PLOT
D
DWITHIN ARE THE PROPRIETARY AND
CONTAINED
B OF CREE, INC. THIS
REMOVED
CONFIDENTIAL INFORMATION
PLOT CHIP DIMENSIONS
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
C
ADDED
OVERALL
HEIGHT TOLERANCE
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN
CONSENT
OF CREE INC.
D
5
CHANGED SOLDERPAD3.45
AND STENCIL VIEWS
Top View
REV
B
4
3
3.45
DATE
DC
5/11/11
DC
5/16/14
APP'D
DC
2/24/15 R1.53
DC
6/17/15
3.30 REF.
3.45
2
D
CHANGED VIEWS T
E
CHANGED SO
REVIS
BY
R1.53
.65
2.36
±0.18
2.36
±0.18
3.30
2.36
±0.18
.65
.83
.83
B
.50
.50
C
E
.50
3.30
REMOVED CHIP DIMENSION
ADDED
OVERALL HEIGHT TOLERA
1.30
2.30
D CHANGED VIEWS TO SHOW MORE CURREN
1.30
2.30
Side View
.50
DESCRIPTION
CHANGED SOLDERPAD AND STENCIL
PRIMARY
PRIMARY
.50
2.30
3.30 REF
.50
.83
.50
.50
.50
REV
3.30
D
3.45
ADDED OV
3.30
D
3.45
REM
C
1
CHANGED VIEWS TO SHOW MORE CURRENT DESIGN
E
2
3
.50
.50
.64
.50
3.30
3.30
.64
B
C
C
B
3.45
3.30
3.30 REF.
R1.53
3.30
3.30
C
ANODE
3.30
R1.53
3.30.65
.25
3.30
1.30
.251.30
.65
ANODE
.75
C
PRIMARY
.75
PRIMARY
R1.53
Bottom View
.65
1.30
3.30
A
ALTERNATIVE
3.30
.50
A
1.01
1.30
1.30
ALL MEASUREMENTS ARE
3.30
2.30
.50
.XXX ±
X°
±
THIRD ANGLE PROJECTION
B
.50
.50
3.30
6
±0.13 mm U
UNLES
PRIMARY
RECOMMENDED STENCIL PATTERNUNLESS OTHERWISE SPECIFIED
3.30
RECOMMENDED PCB SOLDER PAD
DIMENSIONS ARE IN
(HATCHED AREA IS.64
OPENING)
.50
.50
.50
.50
.64
MILLIMETERS AND AFTER FINISH.
RECOMMENDED STENCIL PATTERN
TOLERANCE
UNLESS
SPECIFIED:
THIRD
ANGLE
PROJECTION
.XX
±
.25
(HATCHED AREA IS OPENING)
RECOMMENDED PCB SOLDER PAD
B
ALL MEASU
Alternate Bottom View2.30
1.01
.50
6
3.30
.64
5
.25
.25
3.30
3.30
B
5
4
4
.125
.5 °
TOLERA
D. CRONIN
CHECK
-APPROVED
FOR SH
--
FOR SHEET METAL PARTS ONLY
.X
±
1.5
.XX
±
.75
.XXX ±
.25
X°
±
.5 °
SURFACE FINISH:
D
ALTER
MILLIME
DRAWN BY
MATERIAL
--
SURF
3
FINAL PROTECTIVE FINISH
--
1.6
3
2
B
3.30
1.30
1.01
1.01
2.30
A
ALL MEASUREMENTS ARE
A
N
3.30
1.30
A
3.30
3.30
3.30
Recommended PCB Solder Pad
RECOMMENDED PCB SOLDER PAD
RECOMMENDED PCB
1.01
1.30SOLDER PAD
±0.13 mm UNLESS OTHERWISE INDICATED.
Copyright © 2011-2015 Cree, Inc. 3.30
All rights reserved. The information in this document is
DATE
DRAWN BY
registered
trademarks
of UL LLC.
4600 Silicon Drive
D. CRONIN
3/8/11
UNLESS the
OTHERWISE
SPECIFIED
UR logo
are
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
.XX
±
.25
.XXX ±
.125
X°
±
.5 °
CHECK
Durham, N.C 27703
DATE
RECOMMENDED
PCB --SOLDER PAD
-APPROVED
6--
DATE
--
6
TITLE
Phone (919) 313-5300
Fax (919) 313-5558
5
.75
.25
.75
ALLARE
MEASUREMENTS
ALL MEASUREMENTS
±0.13 mmARE
U
.75
2.30
3.30
DRAWN BY
UNLESS OTHERWISE SPECIFIEDUNLESS OTHERWISE SPECIFIE
D. CRONIN
DIMENSIONS
ARE IN
DIMENSIONS ARE IN
MILLIMETERSCHECK
AND AFTER FINIS
MILLIMETERS AND AFTER FINISH.
RECOMMENDED
RECOMMENDED STENCIL
PATTERN STENCIL PATTERN
TOLERANCE UNLESS SPECIFIED:TOLERANCE UNLESS-- SPECIFIE
.XX
±
.25
.XX
APPROVED
(HATCHED AREA IS(HATCHED
OPENING) AREA IS OPENING)
ALL MEASUREMENTS ARE
±
0.13± mm.25UNLESS OTHERWISE
.XXX ±
.12
.XXX ±
.125
-X°
±
.5
X°
±
.5 °
2.30
THIRD ANGLE PROJECTION
THIRD ANGLE PROJECTION
FOR SHEETMATERIAL
METAL PARTS ON
FOR SHEET METAL
PARTS ONLY
DRAWN BY
®
®
® DATE
subject to change3.30
without notice. Cree , the Cree logo and XLamp are registered
trademarks
of Cree,
Inc. 1.5
UL and .X ±
UNLESS OTHERWISE
SPECIFIED
1.5
.X D. CRONIN
±
3/8/11 .XX
DIMENSIONS ARE IN
±
.75
.XX
±
.75
CHECK
DATE
MILLIMETERS AND AFTER FINISH.
.XXX ±
.25
.XXX ±
.25
FINAL PROTECTIVE FINISH
RECOMMENDED STENCIL PATTERN
±
.5
-- X°
TOLERANCE UNLESS SPECIFIED:
X°
± -- .5 °
.XX
±
.25
1.6
DATE
APPROVED
(HATCHED AREA IS OPENING)
1.6
SURFACE
FINISH:
SURFACE
FINISH:
TITLE
.XXX ±
.125
A
--.5 °
5
4
3
4
3X° ±
2
THIRD ANGLE PROJECTION
MATERIAL
FOR SHEET METAL PARTS ONLY
Recommended Stencil Pattern
(Shaded Area Is Open)
--
36
--
OUT
±0.
0
Y
5
E1
1.7
Do
REF
4.375
Bo
®
XLamp
XT-E
LED
REF
4.375
Bo
Y
D1
1.5 MIN.
SECTION Y-Y
REF
R0.2
TYPICAL
All Cree carrier tapesKoconform to EIA-481D, Automated
Component Handling Systems Standard.
Y
P1
D1
REF
X
X
Tape and Reel
R0.2
TYPICAL
Ko
F(III)
R
Do
1.5
5
P2
2.0 ±0.05 (I)
±0.
0
Po
4.0 ±0.1 (II)
CATHODE SIDE
F(III)
SECTION X-X
REF
4.375
X
SECTION Y-Y
P1
W
D
+/- 0.1
3.70
2.40
5.50
8.00
12.00
+/- 0.1
+0.0/-0.1
+/- 0.05
P1
REV
Ao
2
(III)
B
REF 0.59
+/- 0.1
+0.3/-0.1
Measured from centerline of sprocket hole
to centerline of pocket.
Cumulative tolerance of 10 sprocket
REVISONS
holes is ± 0.20.
BY
DESCRIPTION
ADDED
CATHODE
AND ANODE
NOTE of sprocket
Measured
from
centerline
DC
REORIENTED DEVICE
hole to centerline of pocket.
Other material available.
(II)
3
ANODE SIDE
+/- 0.1
+0.0/-0.1
+/- 0.05
4
Y 3.70
D1
2.40
1.5 MIN.
5.50
8.00
12.00
3.70
Bo
Ko
F
(I)
4
2.2
Bo
Ko
F
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CONTAINED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT
OF CREE INC.
+/0.1
5
R
3.70
REF
R0.2
TYPICAL
Ko
Ao
Ao
P1
W
W
Bo
X
6
All dimensions in mm.
REF 0.59
Y
5
Ao
E1
1.75 ±0.1
T 0.30 ±0.05
4
2.2
1.5 MIN.
SECTION Y-Y
(IV)
1
DATE
APP'D
2/26/12
+/- 0.1
+0.3/-0.1
SECTION X-X
1.5± .1
User Feed Direction
4±.1
(I)
Ao
3.70
3.70
+/- 0.1
2.40
+0.0/-0.1
6
5.50
+/- 0.05
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
8.00
P 1WITHIN ARE THE PROPRIETARY
+/- 0.1
CONTAINED
AND
C CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOTWBE COPIED, REPRODUCED
12.00OR DISCLOSED
+0.3/-0.1TO ANY
Bo
Ko
F
5
4
12.0
+.3
-.0
1
ANODE SIDE
Trailer
160mm (min) of
empty pockets
sealed with tape
(20 pockets min.)
6
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CONTAINED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
Ø190
OF CREE, INC.
User
B
2.5±.1
1.75
±.10
½öÓÃÓÚÆÀ¹À¡£
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
OF CREE, INC.
D
Measured from centerline of sprocket hole
to centerline of pocket.
CATHODE(II)SIDE
Cumulative tolerance ofSTART
10 sprocket
holes is ± 0.20.
(III)
Measured from centerline of sprocket
hole to centerline of pocket.
3
2
ÓÉ Foxit PDF Editor ±à¼(IV) 2004Other material available.
°æȨËùÓÐ (c) by Foxit Software Company,
8±.1
+/- 0.1END
Leader
400mm (min.) of
empty pockets with
at least 100mm
sealed by tape
(50 empty pockets min.)
Loaded Pockets
(1000 Lamps)
5
4
D
3
2
ÓÉ Foxit PDF Editor ±à¼°æȨËùÓÐ (c) by Foxit Software Company, 2004
½öÓÃÓÚÆÀ¹À¡£
1
16.40
Feed Direction
D
D
C
Carrier Tape
C
Pocket Tape
16.40
Ø190
Ø61 ± 0.5
13mm
OD
7"
A
C
7.5
''
C
12.40 +2.00
0
MEASURED AT HUB
THIRD ANGLE PROJECTION
B
Ø13
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
.XX ±
.25
.XXX ±
.125
X°
±
.5 °
FOR SHEET METAL PARTS ONLY
.X
±
1.5
.XX ±
.75
.XXX ±
.25
X°
±
.5 °
Ø61 ± 0.5
SURFACE FINISH:
6
5
4
D. CRONIN
4600 Silicon Drive
Durham, N.C 27703
11/29/10
DATE
--
Phone (919) 313-5300
--
Fax (919) 313-5558
DATE
APPROVED
--
--
B
TITLE
XP HEW LOADING SPEC
MATERIAL
--
SIZE
FINAL PROTECTIVE FINISH
--
1.6
3
12.40
OD
7.5 MEASURED AT INSIDE EDGE
12.40 +2.00
''
0
MEASURED AT HUB
DATE
DRAWN BY
CHECK
SCALE
2402-00014
SHEET
3.000
2
1
B
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
B
UNLESS OTHERWISE SPECIFIED
the UR logo are
registered trademarks of UL LLC.
2012/5/25
LIUDEZHI
DRAWN BY
A
DIMENSIONS ARE IN
MILLIMETERS & BEFORE FINISH.
TOLERANCE UNLESS SPECIFIED:
.X ± 0.3
.XX ± .13
Ø13
THIRD ANGLE PROJECTION
12.40
X°
± 1°
FOR SHEET METAL PARTS ONLY
.X ± .25
DATE
CHECK
DATE
APPROVED
DATE
4600 Silicon Drive
Durham, N.C 27703
Phone (919) 361-4770
A
TITLE
Reel,
MATERIAL
PS
SIZE
7" x 12mm Wide
DRAWING NO.
REV.
REV.
DRAWING NO.
C
37
B
OF
1/
XLamp ® XT-E LED
Humidity Indicator
Card (inside bag)
Packaging
Dessicant
(inside bag)
Unpackaged Reel
Label with Cree Bin Code,
Quantity, Reel ID
Packaged Reel
Label with Cree Bin
Code, Qty, Lot #
Vacuum-Sealed
Moisture Barrier Bag
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Label with Custo
Code, Qty, Reel I
Boxed Reel
Label with Cree Order Code,
Quantity, Reel ID, PO #
Patent Label
Label with Cree Bin Code,
Quantity, Reel ID
Patent Label
Copyright © 2011-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
38