TECH. CORP. SPECIFICATIONS CUSTOMER : PTC SAMPLE CODE : SG12864LRU-FGAH04Q MASS PRODUCTION CODE : PG12864LRU-FGAH04Q SAMPLE VERSION : 01 SPECIFICATIONS EDITION : 001 DRAWING NO. : JLMD- PG12864LRU-FGAH04Q _001 : - (Ver.) PACKAGING NO. (Ver.) Customer Approved POWERTIP 2013.07.18 Date: JS RD APPROVED Approved Checked Designer 閆偉 劉進 周志仙 ■ Preliminary specification for design input □ Specification for sample approval POWERTIP TECH. CORP. Headquarters: th No.8, 6 Road, Taichung Industrial Park, TEL: 886-4-2355-8168 E-mail: [email protected] FAX: 886-4-2355-8166 Http://www.powertip.com.tw Taichung, Taiwan 台中市 407 工業區六路 8 號 History of Version NO.PT-A-005-8 Date (mm / dd / yyyy) 07/16/2013 Ver. Edi. 01 001 Description Page Design by New Drawing - 周志仙 Total: 24 Pages PG12864LRU-FGAH04Q Page2 SAMPLE Ver.01 SPEC Edi.001 Contents 1. SPECIFICATIONS 1.1 1.2 1.3 1.4 1.5 1.6 Features Mechanical Specifications Absolute Maximum Ratings DC Electrical Characteristics Optical Characteristics Backlight Characteristics 2. MODULE STRUCTURE 2.1 Counter Drawing 2.2 Interface Pin Description 2.3 Timing Characteristics 3. QUALITY ASSURANCE SYSTEM 3.1 3.2 Quality Assurance Flow Chart Inspection Specification 4. RELIABILITY TEST 4.1 Reliability Test Condition 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 Safety 5.2 Handling 5.3 Storage 5.4 Terms of Warranty Appendix : 1. LCM drawing PG12864LRU-FGAH04Q Page3 SAMPLE Ver.01 SPEC Edi.001 1. SPECIFICATIONS 1.1 Features Item Standard Value Display Type 128 * 64 Dots LCD Type STN, YG , Transflective , Positive,Extended Temp Driver Condition LCD Module : 1/64Duty ,1/9Bias Viewing Direction 6 O’clock Backlight YG LED B/L Weight - Other(controller / driver IC) SAP1024B / NT7086 ROHS THIS PRODUCT CONFORMS THE ROHS OF PTC Detail information please refer web site : http://www.powertip.com.tw/news.php?area_id_view=1085560481/ 1.2 Mechanical Specifications Item Standard Value Unit Outline Dimension 78.0 (L)* 70.0(W) *14.3MAX(H) mm Viewing Area 62.0(L) *44.0(W) mm Active Area 56.27(L) *38.35(W) mm Characters Size 0.39(L) *0.55(W) mm Characters Pitch 0.44(L) * 0.60(W) mm Note:For detailed information please refer to LCM drawing 1.3 Absolute Maximum Ratings Item Symbol Condition Min. Max. Unit Power Supply Voltage VDD - -0.3 7.0 V LCD Driver Supply Voltage Vop - 0 30 V Input Voltage VIN - -0.3 VDD+0.3 V Operating Temperature TOP - -20 70 ℃ Storage Temperature TST - -30 80 ℃ Storage Humidity HD Ta<60 ℃ - 90 %RH PG12864LRU-FGAH04Q Page4 SAMPLE Ver.01 SPEC Edi.001 1.4 DC Electrical Characteristics VDD =5.0±0.5V,VSS=0V, Ta = 25°C Item Symbol Condition Min. Typ. Max. Unit Logic Supply Voltage VDD - 2.7 5 5.5 V “H” Input Voltage VIH - VDD-2.2 - VDD V “L” Input Voltage VIL - 0 - 0.8 V “H” Output Voltage VOH - VDD-0.3 - VDD V “L” Output Voltage VOL - 0 - 0.3 V Supply Current IDD VDD=5.0V;VOP=TBD Pattern=TBD *1 - TBD TBD mA -20℃ TBD TBD TBD 25℃ TBD TBD TBD 70℃ TBD TBD TBD LCM Driver Voltage VOP*2 V Note :1.Maximum current display 2.The VOP test point is VDD -Vo. PG12864LRU-FGAH04Q Page5 SAMPLE Ver.01 SPEC Edi.001 1.5 Optical Characteristics LCD Panel:1/64Duty,1/9Bias,VLCD =TBD,Ta =25℃ Item Symbol Rise tr Fall tf Top θ+ Bottom θ- Left θL Right θR Response Time Viewing angle range Contrast Ratio C Average Brightness (with LCD) *2 IV Conditions Min. Typ. Max. Unit Reference - 100 150 - 230 345 ms Note 2 - 40 - - 40 - - 40 - Deg. Note 1 - 40 - - 5 - - Note 3 TBD TBD - cd/m2 TBD TBD TBD - - C>2.0 - CIE Color Coordinate (With LCD) X Y TBD TBD TBD - Uniformity *1 △B 70 - - % IF=350mA Note 4 Note 4 : 1:△B=B(min) / B(max) * 100% 2:Measurement Condition for Optical Characteristics: a:Environment: 25℃±5℃ / 60±20%R.H,no wind,dark room below 10 Lux at typical lamp current and typical operating frequency. b:Measurement Distance: 500 ± 50 ㎜ ,(θ= 0°) c:Equipment: TOPCON BM-7 fast,(field 1°),after 10 minutes operation. d:The uncertainty of the C.I.E coordinate measurement ±0.01,Average Brightness ± 4% 1 2 3 VIEW AREA 6 5 4 7 8 θθ 9 500 ㎜ LCM Colorimeter=BM-7 fast PG12864LRU-FGAH04Q Page6 SAMPLE Ver.01 SPEC Edi.001 Note 1. Optical characteristics-2 Viewing angle Rear (12H) φ=90° Top (θ=0°) θL θR θ+ θ- Left (9H) φ=180° Right (3H) φ =0° Front (6H) φ=270° Viewing angle PG12864LRU-FGAH04Q Page7 SAMPLE Ver.01 SPEC Edi.001 Note 2. Optical characteristics-3 Fig.2 Definition of response time Positive Type No selected waveform No selected waveform Selected waveform Transmittance 10% 90% 100% Tf Tr Negative Type No selected waveform No selected Selected waveform Transmittance 100% 90% 10% Tr PG12864LRU-FGAH04Q Tf Page8 SAMPLE Ver.01 SPEC Edi.001 Electrical characteristics-2 ※2 Drive waveform Vop: Drive voltage 1/B: Bias N: Duty fF: Frame frequency fD: Drive frequency (1) Selected waveform 1 2 3 N 1 3 2 V Vop/B Vop/B V 1/fD 1/fF (2) Non- Selected wave form 1 2 3 N 1 2 3 (1-2/B)Vop Vop/B Vop/ (1-2/B)Vop 1/fF 1/fD Note: Frame frequency is defined as follows: Common side supply voltage peak - to - peak /2 = 1 period PG12864LRU-FGAH04Q Page9 SAMPLE Ver.01 SPEC Edi.001 Note 3. : Definition of Vth Selected waveform 100 % 73% Transmittance No selected waveform 50% Vth1 Vth2 Drive voltage Active voltage range View direction Drive waveform Transmittance Vth1 Vth2 10 ° (Selected waveform) 50% 40 ° (No selected waveform) 73% ※1 Contrast ratio = (Brightness in OFF state) / (Brightness in ON state) Outline of Electro-Optical Characteristics Measuring System Photo Detector θ Human Active Illumination Temperature Control Chamber ψ LCD Panel Transmissive Measuring System: Autronic DMS-803 PG12864LRU-FGAH04Q Page10 SAMPLE Ver.01 SPEC Edi.001 1.6 Backlight Characteristics Maximum Ratings Item Symbol Conditions Min. Typ Max. Unit Forward Current IF Ta =25℃ - - 875 mA Reverse Voltage VR Ta =25℃ - - 10 V Power Dissipation PO Ta =25℃ - - 4.025 W Electrical / Optical Characteristics Item Symbol Conditions Min. Typ. Max. Unit Reverse Current IR VR=10V - - 0.35 mA Forward Voltage VF - 4.2 4.6 V Luminous Intensity (without LCD) IV 220 270 - cd/m2 Dominant wavelenghth λD 569 - 576 Nm IF=350mA Color PG12864LRU-FGAH04Q Yellow-green Page11 SAMPLE Ver.01 SPEC Edi.001 2. MODULE STRUCTURE 2.1 Counter Drawing 2.1.1 LCM Mechanical Diagram * See Appendix 2.1.2 Block Diagram PG12864LRU-FGAH04Q Page12 SAMPLE Ver.01 SPEC Edi.001 2.2 Interface Pin Description 2.2.1 Application Notes 2.2.2 Refer Initial code TBD PG12864LRU-FGAH04Q Page13 SAMPLE Ver.01 SPEC Edi.001 2.3 Timing Characteristics PG12864LRU-FGAH04Q Page14 SAMPLE Ver.01 SPEC Edi.001 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart Item Customer Sales Info Marketing & Design R&D Manufactur ing Q.A Product control Purchase Inventory control Survey Request Project Inquiry evaluation Project Validation NG OK Quote Contract Design check Sample test Sample Approval NG Verification NG OK Sample approval OK Pilot Pilot Run & Mass Product NG Verification OK Specification preparation Mass production OK Ship Out PG12864LRU-FGAH04Q run & Reliability test Inspection NG Shipment Ship out Page15 SAMPLE Ver.01 SPEC Edi.001 Item Customer Sales Info Claim R&D Q.A Manufact Product Inventory Purchase uring control control Failure analysis Sales Service Analysis report Corrective action Tracking 1. ISO 9001 Maintenance Activities Q.A 3. Equipment calibration Activity 5. Standardization Management PG12864LRU-FGAH04Q 2. Process improvement proposal 4. Education And Training Activities Page16 SAMPLE Ver.01 SPEC Edi.001 3.2 Inspection Specification PG12864LRU-FGAH04Q Page17 SAMPLE Ver.01 SPEC Edi.001 PG12864LRU-FGAH04Q Page18 SAMPLE Ver.01 SPEC Edi.001 PG12864LRU-FGAH04Q Page19 SAMPLE Ver.01 SPEC Edi.001 PG12864LRU-FGAH04Q Page20 SAMPLE Ver.01 SPEC Edi.001 PG12864LRU-FGAH04Q Page21 SAMPLE Ver.01 SPEC Edi.001 PG12864LRU-FGAH04Q Page22 SAMPLE Ver.01 SPEC Edi.001 4. RELIABILITY TEST 4.1 Reliability Test Condition NO. TEST ITEM 1 High Temperature Storage Test 2 Low Temperature Storage Test 3 High Temperature / High Humidity Storage Test 4 Temperature Cycling Storage Test 5 ESD Test 6 Vibration Test (Packaged) 7 Drop Test (Packaged) (Ver.B01) TEST CONDITION Keep in 80 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. Keep in -30 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. Keep in 60℃ / 90% R.H duration for 96 hrs Surrounding temperature, then storage at normal condition 4hrs. (Excluding the polarizer) -30℃ → +25℃ → 80℃ → +25℃ (30mins) (5mins) (30mins) (5mins) 10 Cycle Surrounding temperature, then storage at normal condition 4hrs. Air Discharge: Contact Discharge: Apply 2 KV with 5 times Apply 250 V with 5 times Discharge for each polarity +/discharge for each polarity +/1.Temperature ambiance : 15℃~35℃ 2.Humidity relative : 30%~60% 3.Energy Storage Capacitance(Cs+Cd) : 150pF±10% 4.Discharge Resistance(Rd) : 330Ω±10% 5.Discharge, mode of operation : Single Discharge (time between successive discharges at least 1 sec) (Tolerance if the output voltage indication : ±5%) 1.Sine wave 10~55 Hz frequency (1 min/sweep) 2.The amplitude of vibration :1.5 mm 3. Each direction (X、Y、Z) duration for 2 Hrs Packing Weight (Kg) 0 ~ 45.4 Drop Height (cm) 122 45.4 ~ 90.8 76 90.8 ~ 454 61 Over 454 46 Drop Direction :※1 corner / 3 edges / 6 sides each 1time PG12864LRU-FGAH04Q Page23 SAMPLE Ver.01 SPEC Edi.001 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 SAFETY 5.1.1 5.1.2 If the LCD panel breaks , be careful not to get the liquid crystal to touch your skin. If the liquid crystal touches your skin or clothes , please wash it off immediately by using soap and water. 5.2 HANDLING 5.2.1 5.2.2 5.2.3 5.2.4 5.2.5 5.2.6 5.2.7 5.2.8 5.2.9 Avoid any strong mechanical shock which can break the glass. Avoid static electricity which can damage the CMOS LSI—When working with the module , be sure to ground your body and any electrical equipment you may be using. Do not remove the panel or frame from the module. The polarizing plate of the display is very fragile. So , please handle it very carefully, do not touch , push or rub the exposed polarizing with anything harder than an HB pencil lead (glass , tweezers , etc.) Do not wipe the polarizing plate with a dry cloth , as it may easily scratch the surface of plate. Do not touch the display area with bare hands , this will stain the display area. Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with a cleaning naphtha solvent. To control temperature and time of soldering is 320 ± 10°C and 3-5 sec. To avoid liquid (include organic solvent) stained on LCM 5.3 STORAGE 5.3.1 5.3.2 5.3.3 Store the panel or module in a dark place where the temperature is 25°C ± 5°C and the humidity is below 65% RH. Do not place the module near organics solvents or corrosive gases. Do not crush , shake , or jolt the module. 5.4 TERMS OF WARRANTY 5.4.1 5.4.2 Applicable warrant period The period is within thirteen months since the date of shipping out under normal using and storage conditions. Unaccepted responsibility This product has been manufactured to your company’s specification as a part for use in your company’s general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment, we cannot take responsibility if the product is used in nuclear power control equipment, aerospace equipment , fire and security systems or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required. PG12864LRU-FGAH04Q Page24 SAMPLE Ver.01 SPEC Edi.001