TECH. CORP. SPECIFICATIONS CUSTOMER : CUS999 SAMPLE CODE : SE128128WRF-003-HQ MASS PRODUCTION CODE : PE128128WRF-003-HQ SAMPLE VERSION : 02 SPECIFICATIONS EDITION : 002 DRAWING NO. (Ver.) : LMD-PE128128WRF-003-HQ_001 PACKAGING NO. (Ver.) : PKG-PE128128WRF-003-HQ_001 Customer Approved POWERTIP Date: 2013.07.05 JS RD APPROVED Approved Checked Designer 閆偉 Ryan 劉進 Lori 李誠 Bruce □ Preliminary specification for design input ■ Specification for sample approval POWERTIP TECH. CORP. Headquarters: th No.8, 6 Road, Taichung Industrial Park, TEL: 886-4-2355-8168 E-mail: [email protected] FAX: 886-4-2355-8166 Http://www.powertip.com.tw Taichung, Taiwan 台中市 407 工業區六路 8 號 NO.PT-A-005-8 History of Version Date (mm / dd / yyyy) Ver. Edi. Description Page Design by New Sample - Ackey 10/24/2007 0 09/19/2008 01 001 Mass Production - Ackey 06/26/2013 02 002 FPC second source - Bruce Total：29page PE128128WRF-003HQ Page2 SAMPLE Ver.02 SPEC Edi.002 Contents 1. SPECIFICATIONS 1.1 1.2 1.3 1.4 1.5 1.6 Features Mechanical Specifications Absolute Maximum Ratings DC Electrical Characteristics Optical Characteristics Backlight Characteristics 2. MODULE STRUCTURE 2.1 Counter Drawing 2.2 Interface Pin Description 2.3 Timing Characteristics 3. QUALITY ASSURANCE SYSTEM 3.1 3.2 Quality Assurance Flow Chart Inspection Specification 4. RELIABILITY TEST 4.1 Reliability Test Condition 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 Safety 5.2 Handling 5.3 Storage 5.4 Terms of Warranty Appendix: 1. LCM Drawing 2. Packing Specification Note: For detailed information please refer to IC data sheet: Sitronix --- ST7541 PE128128WRF-003HQ Page3 SAMPLE Ver.02 SPEC Edi.002 1. SPECIFICATIONS 1.1 Features Item Standard Value Display Type 128 * 128 Dots LCD Type FSTN, Positive, Transflective Driver Condition LCD Module：1/128 Duty, 1/10 Bias Viewing Direction 6 O’clock Backlight White LED Interface 8-bit parallel bi-directional interface with 8080-series or 6800series. Other (controller / driver IC) Sitronix --- ST7541 THIS PRODUCT CONFORMS THE ROHS OF PTC ROHS 1.2 Detail information please refer web site : http://www.powertip.com.tw/news.php?area_id_view=1085560481/ Mechanical Specifications Item Standard Value Unit Outline Dimension 60.0 (W) * 62.0(L) * 12.2 (H) mm Viewing Area 50.0 (W) * 50.0 (L) mm Active Area 46.05 (W) * 46.05 (L) mm Dot Size 0.33 (W) * 0.33(H) mm Dot Pitch 0.36 (W) * 0.36(H) mm Note：For detailed information please refer to LCM drawing 1.3 Absolute Maximum Ratings Item Symbol Condition Min. Max. Unit Power Supply Voltage VDD － -0.5 +5.0 V Input Voltage VIN － -0.5 VDD+0.5 V Operating Temperature TOP － 0 70 ℃ Storage Temperature TST － -30 80 ℃ Storage Humidity HD Ta < 40 °C 20 90 %RH PE128128WRF-003HQ Page4 SAMPLE Ver.02 SPEC Edi.002 1.4 DC Electrical Characteristics VDD = 3.0±0.3V, VSS = 0V, Ta = 25°C Module Item Symbol Condition Min. Typ. Max. Unit Logic Supply Voltage VDD － 2.8 3.0 3.2 V Input High Voltage VIH － 0.7VDD － VDD V Input Low Voltage VIL － VSS － 0.3VDD V Output High Voltage VOH IOH = -0.5mA 0.7VDD － VDD V Output Low Voltage VOL IOL = -0.5mA VSS － 0.3VDD V － 1 － VDD=3.0 V；VOP=13.8 V Supply Current IDD Pattern= Full Display VDD=3.0 V；VOP=13.8 V － 1 1.5 -20℃ 12.5 12.7 12.9 25℃ 12.0 12.2 12.4 70℃ 11.05 11.2 11.35 Pattern= ABB menu*1 VOP LCM Driver Voltage *2 mA V NOTE：*1 The Maximum current display. *2 The VOP test point is V0-VSS. PE128128WRF-003HQ Page5 SAMPLE Ver.02 SPEC Edi.002 1.5 Optical Characteristics LCD Panel：Duty=1/128，Bias=1/10，VOP=12.2V，Ta =25℃ Item Symbol Min. Typ. Max. Unit Reference ms Note2 Deg. Note 1 Rise Tr - 260 390 Fall Tf - 130 195 Top ΘY+ - 40 - Bottom ΘY- - 40 - Left ΘX- - 45 - Right ΘX+ - 45 - - 3 - - Note 3 60 65 - cd/m2 - 0.26 0.31 0.36 0.27 0.32 0.37 - Note 4 70 - - % Note 4 Response Time Viewing angle range Conditions Contrast Ratio (With BL) CR Average Brightness (With BL) *2 IV X CIE Color Coordinate (With BL) *2 Y Uniformity *1 △B θ = 0°, ∅ = 270 ﾟ IF=2 x 30 mA - Note： *1：△B=B(min) / B(max) * 100% *2：Measurement Condition for Optical Characteristics: a：Environment: 25℃±5℃ / 60±20%R.H，no wind，dark room below 10 Lux at typical lamp current and typical operating frequency. b：Measurement Distance: 500 ± 50 ㎜ ，(θ= 0°) c：Equipment: TOPCON BM-7 fast，(field 1°)，after 10 minutes operation. d：The uncertainty of the C.I.E coordinate measurement ±0.01，Average Brightness ± 4% 1 2 3 VIEW AREA 6 5 4 7 8 θθ 9 500 ㎜ LCM Colorimeter=BM-7 fast PE128128WRF-003HQ Page6 SAMPLE Ver.02 SPEC Edi.002 Note 1. Optical characteristics-2 Viewing angle Rear (12H) φ=90° Top (θ=0°) θL θR θ+ θ- Left (9H) φ=180° Right (3H) φ =0° Front (6H) φ=270° Viewing angle PE128128WRF-003HQ Page7 SAMPLE Ver.02 SPEC Edi.002 Note 2. Optical characteristics-3 Fig.2 Definition of response time Positive Type No selected waveform No selected waveform Selected waveform Transmittance 10% 90% 100% Tf Tr Negative Type No selected waveform No selected Selected waveform Transmittance 100% 90% 10% Tr PE128128WRF-003HQ Tf Page8 SAMPLE Ver.02 SPEC Edi.002 Electrical characteristics-2 ※2 Drive waveform Vop: Drive voltage 1/B: Bias N: Duty fF: Frame frequency fD: Drive frequency (1) Selected waveform 1 2 3 N 1 3 2 V Vop/B Vop/B V 1/fD 1/fF (2) Non- Selected wave form 1 2 3 N 1 2 3 (1-2/B)Vop Vop/B Vop/ (1-2/B)Vop 1/fF 1/fD Note: Frame frequency is defined as follows: Common side supply voltage peak - to - peak /2 = 1 period PE128128WRF-003HQ Page9 SAMPLE Ver.02 SPEC Edi.002 Note 3. : Definition of Vth Selected waveform 100 73% Transmittanc No selected waveform 50% Vth1 Vth2 Drive Active voltage range View direction Drive waveform Transmittance Vth1 10° (Selected waveform) 50% Vth2 40° (No selected waveform) 73% ※1 Contrast ratio = (Brightness in OFF state) / (Brightness in ON state) Outline of Electro-Optical Characteristics Measuring System Photo Detector θ Human Active ψ Temperatur e Control Chamber LCD Panel Transmissive Measuring System: Autronic DMS-803 PE128128WRF-003HQ Page10 SAMPLE Ver.02 SPEC Edi.002 1.6 Backlight Characteristics Maximum Ratings Item Symbol Conditions Min. Max. Unit Forward Current IF Ta =25℃ － 100 mA Reverse Voltage VR Ta =25℃ － 1.0 V Power Dissipation PD Ta =25℃ － 300 mW Electrical / Optical Characteristics Item Symbol Conditions Min. Typ. Max. Unit Forward Voltage VF IF=60 mA 3.0 3.3 3.6 V Reverse Current IR VR=0.8V - 15 - CIE Color Coordinate (Without LCD) X 0.26 0.29 0.32 Y 0.26 0.29 0.32 300 450 - Average Brightness (without LCD) IF=60 mA IV Color － White Internal Circuit Diagram PE128128WRF-003HQ Page11 SAMPLE Ver.02 SPEC Edi.002 2. MODULE STRUCTURE 2.1 Counter Drawing 2.1.1 LCM Mechanical Diagram * See Appendix 2.1.2 Block Diagram PE128128WRF-003HQ Page12 SAMPLE Ver.02 SPEC Edi.002 2.2 Interface Pin Description Pin Symbol 01 V0 02 V1 03 V2 04 V3 05 V4 06 VOUT_IN 07 VOUT_OUT 08 VSS Ground. 09 VDD Power supply. 10 D7 11 D6 12 D5 13 D4 14 D3 15 D2 16 D1 17 D0 18 E/RD Description LCD driver supply voltage. To connect capacitors as shown below. Vout voltage to be internally generator. 8-bit parallel bi-direction data bus. Voltage converter input voltage pin. Read/Write execution control pin. 6800 series:E=”H”:Read. Data on DB7~DB0 are latched on falling edge of E Signal. 8080 series:/RD=”L”:Read enable. 19 RW/WR Read/Write execution control pin. 6800 series:RW=”H”:Read enable. RW=”L”:Write enable. 8080 series:/WR=”L”:Write enable. 20 A0 RS=”L”:DB7~DB0 are control data. RS=”H”:DB7~DB0 are display data. 21 RST Pin Symbol PE128128WRF-003HQ Reset input pin. Initialization is executed when RST=”L”. Description Page13 SAMPLE Ver.02 SPEC Edi.002 22 CSB Chip select input pins. Data/instruction transfer enable only when CSB=”L”. 23 PS1 24 PS0 PS0=”H” PS1=”H”:6800 series parallel. PS0=”H” PS1=”L”:8080 series parallel. 25 K LED Backlight Cathode input. 26 A LED Backlight Anode input. 2.2.1 Application Notes: 2.2.2 Refer Initial code: void Initial_(void) PE128128WRF-003HQ Page14 SAMPLE Ver.02 SPEC Edi.002 { WriteCOM_(0xe2); WriteCOM_(0x38); WriteCOM_(0x04); WriteCOM_(0x48); WriteCOM_(0x80); WriteCOM_(0x44); WriteCOM_(0x00); WriteCOM_(0x40); WriteCOM_(0x00); WriteCOM_(0xa0); WriteCOM_(0xc8); WriteCOM_(0xab); WriteCOM_(0x67); WriteCOM_(0x27); WriteCOM_(0x81); WriteCOM_(ael); WriteCOM_(0x55); WriteCOM_(0x88); WriteCOM_(0x00); WriteCOM_(0x89); WriteCOM_(0x00); WriteCOM_(0x8a); WriteCOM_(0x99); WriteCOM_(0x8b); WriteCOM_(0x99); WriteCOM_(0x8c); WriteCOM_(0x99); WriteCOM_(0x8d); WriteCOM_(0x99); WriteCOM_(0x8e); WriteCOM_(0xff); WriteCOM_(0x8f); WriteCOM_(0xff); WriteCOM_(0x97); WriteCOM_(0x38); PE128128WRF-003HQ // Set Reset //mode set // Set duty(1/128) // // ADC Select // SHL Select // Set Osc // Set DC-DC Setup(6x) // Set Regulator resistor // Set Electronic Volumn // Set Bias(1/10) //Gray-Scale Setting // Set PWM & FRC mode ON/OFF //mode set Page15 SAMPLE Ver.02 SPEC Edi.002 WriteCOM_(0x04); WriteCOM_(0x2f); WriteCOM_(0x2f); WriteCOM_(0x2f); WriteCOM_(0xa6); WriteCOM_(0xaf); // Set Power Control // Set Power Control // Set Power Control // Set Display ON/OFF } 2.3 Timing Characteristics PE128128WRF-003HQ Page16 SAMPLE Ver.02 SPEC Edi.002 PE128128WRF-003HQ Page17 SAMPLE Ver.02 SPEC Edi.002 PE128128WRF-003HQ Page18 SAMPLE Ver.02 SPEC Edi.002 PE128128WRF-003HQ Page19 SAMPLE Ver.02 SPEC Edi.002 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart Item Customer Sales Info Marketing & Design R&D Manufactu Product Inventory Purchase ring control control Q.A Survey Request Project Inquiry evaluation Project Validation NG OK Quote Contract Design check Sample test Sample Approval NG Verification NG OK Sample approval OK Pilot Pilot Run & Mass Product NG Verification OK Specification preparation Mass production OK Ship Out PE128128WRF-003HQ run & Reliability test Inspection NG Shipment Ship out Page20 SAMPLE Ver.02 SPEC Edi.002 Item Customer Sales Info Claim R&D Manufact Product Inventory Purchase uring control control Q.A Failure analysis Sales Service Analysis report Corrective action Tracking 1. ISO 9001 Maintenance Activities Q.A 3. Equipment calibration Activity 5. Standardization Management PE128128WRF-003HQ 2. Process improvement proposal 4. Education And Training Activities Page21 SAMPLE Ver.02 SPEC Edi.002 3.2 Inspection Specification PE128128WRF-003HQ Page22 SAMPLE Ver.02 SPEC Edi.002 PE128128WRF-003HQ Page23 SAMPLE Ver.02 SPEC Edi.002 PE128128WRF-003HQ Page24 SAMPLE Ver.02 SPEC Edi.002 PE128128WRF-003HQ Page25 SAMPLE Ver.02 SPEC Edi.002 PE128128WRF-003HQ Page26 SAMPLE Ver.02 SPEC Edi.002 PE128128WRF-003HQ Page27 SAMPLE Ver.02 SPEC Edi.002 4. RELIABILITY TEST 4.1 Reliability Test Condition NO. TEST ITEM 1 High Temperature Storage Test 2 Low Temperature Storage Test 3 High Temperature / High Humidity Storage Test 4 Temperature Cycling Storage Test 5 ESD Test 6 Vibration Test (Packaged) 7 Drop Test (Packaged) (Ver.B01) TEST CONDITION Keep in 80 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. Keep in -30 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. Keep in +60 ℃ / 90% R.H duration for 96 hrs Surrounding temperature, then storage at normal condition 4hrs. (Excluding the polarizer) -30℃→ +25℃ → 80℃ → +25℃ (30mins) (5mins) (30mins) (5mins) 10 Cycle Surrounding temperature, then storage at normal condition 4hrs. Air Discharge: Contact Discharge: Apply 2 KV with 5 times Apply 250 V with 5 times Discharge for each polarity +/discharge for each polarity +/1. Temperature ambiance : 15℃～35℃ 2. Humidity relative : 30%～60% 3. Energy Storage Capacitance(Cs+Cd) : 150pF±10% 4. Discharge Resistance(Rd) : 330Ω±10% 5. Discharge, mode of operation : Single Discharge (time between successive discharges at least 1 sec) (Tolerance if the output voltage indication : ±5%) 1. Sine wave 10～55 Hz frequency (1 min/sweep) 2. The amplitude of vibration :1.5 mm 3. Each direction (X、Y、Z) duration for 2 Hrs Packing Weight (Kg) 0 ~ 45.4 Drop Height (cm) 122 45.4 ~ 90.8 76 90.8 ~ 454 61 Over 454 46 Drop Direction :※1 corner / 3 edges / 6 sides each 1time PE128128WRF-003HQ Page28 SAMPLE Ver.02 SPEC Edi.002 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 SAFETY 5.1.1 5.1.2 If the LCD panel breaks, be careful not to get the liquid crystal to touch your skin. If the liquid crystal touches your skin or clothes, please wash it off immediately by using soap and water. 5.2 HANDLING 5.2.1 5.2.2 5.2.3 5.2.4 5.2.5 5.2.6 5.2.7 5.2.8 5.2.9 Avoid any strong mechanical shock which can break the glass. Avoid static electricity which can damage the CMOS LSI—When working with the module , be sure to ground your body and any electrical equipment you may be using. Do not remove the panel or frame from the module. The polarizing plate of the display is very fragile. So, please handle it very carefully, do not touch , push or rub the exposed polarizing with anything harder than an HB pencil lead (glass , tweezers , etc.) Do not wipe the polarizing plate with a dry cloth, as it may easily scratch the surface of plate. Do not touch the display area with bare hands, this will stain the display area. Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with a cleaning naphtha solvent. To control temperature and time of soldering is 320 ± 10°C and 3-5 sec. To avoid liquid (include organic solvent) stained on LCM 5.3 STORAGE 5.3.1 5.3.2 5.3.3 Store the panel or module in a dark place where the temperature is 25°C ± 5°C and the humidity is below 65% RH. Do not place the module near organics solvents or corrosive gases. Do not crush, shake, or jolt the module. 5.4 TERMS OF WARRANTY 5.4.1 5.4.2 Applicable warrant period The period is within thirteen months since the date of shipping out under normal using and storage conditions. Unaccepted responsibility This product has been manufactured to your company’s specification as a part for use in your company’s general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment, we cannot take responsibility if the product is used in nuclear power control equipment, aerospace equipment , fire and security systems or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required. PE128128WRF-003HQ Page29 SAMPLE Ver.02 SPEC Edi.002