TECH. CORP. SPECIFICATIONS CUSTOMER : SAMPLE CODE : SG320240WRFDBAH31Q MASS PRODUCTION CODE : PG320240WRFDBAH31Q SAMPLE VERSION : 01 SPECIFICATIONS EDITION : 002 DRAWING NO. (Ver.) : JLMD-PG320240WRFDBAH31Q_003 PACKAGING NO. (Ver.) : JPKG-PG320240WRFDBAH31Q_001 Customer Approved POWERTIP 2013.09.05 Date: JS RD APPROVED Approved Checked Designer 閆偉 張久慧 劉進 □ Preliminary specification for design input ■ Specification for sample approval POWERTIP TECH. CORP. Headquarters: th No.8, 6 Road, Taichung Industrial Park, TEL: 886-4-2355-8168 E-mail: [email protected] FAX: 886-4-2355-8166 Http://www.powertip.com.tw Taichung, Taiwan 台中市 407 工業區六路 8 號 NO.PT-A-005-8 RECORDS OF REVISION Date (mm / dd / yyyy) Ver. Edi. Description Page Design by 07/02/2013 01 001 New Drawing - 劉進 08/31/2013 01 002 Sample Specification - 劉進 Total:28 pages PG320240WRFDBAH31Q Page2 SAMPLE Ver.01 SPEC Edi.002 Contents 1. SPECIFICATIONS 1.1 1.2 1.3 1.4 1.5 1.6 Features Mechanical Specifications Absolute Maximum Ratings DC Electrical Characteristics Optical Characteristics Backlight Characteristics 2. MODULE STRUCTURE 2.1 Counter Drawing 2.2 Interface Pin Description 2.3 Timing Characteristics 2.4 Display Command 2.5 Jumper 3. QUALITY ASSURANCE SYSTEM 3.1 3.2 Quality Assurance Flow Chart Inspection Specification 4. RELIABILITY TEST 4.1 Reliability Test Condition 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 Safety 5.2 Handling 5.3 Storage 5.4 Terms of Warranty Appendix: 1. LCM Drawing 2. Packaging PG320240WRFDBAH31Q Page3 SAMPLE Ver.01 SPEC Edi.002 1. SPECIFICATIONS 1.1 Features Item Standard Value Display Type 320*240 dots LCD Type FSTN, Positive ,Transflective ,Extended Temp. Driver Condition LCD Module:1/240 Duty,1/16Bias Viewing Direction 6 O’clock Backlight LED Back Light Weight 262g Interface 8 bits parallel data input for 8080 series Other(controller / driver IC) RA8835 ROHS THIS PRODUCT CONFORMS THE ROHS OF PTC Detail information please refer web site : http://www.powertip.com.tw/news.php?area_id_view=1085560481/ 1.2 Mechanical Specifications Item Standard Value Unit Outline Dimension 148.02(L) *120.24(w) * 21.0(H)(Max) mm Viewing Area 120.14(L) * 92.14(w) mm Active Area 115.18(L) * 86.38(w) mm Dot Size 0.34(L) * 0.34(w) mm Dot Pitch 0.36(L) * 0.36(w) mm Note:For detailed information please refer to LCM drawing 1.3 Absolute Maximum Ratings Item Symbol Condition Min. Max. Unit Power Supply Voltage VDD - -0.3 +7.0 V Input Voltage VIN - -0.3 VDD+0.3 V Operating Temperature TOP - -20 70 ℃ Storage Temperature TST - -30 80 ℃ Storage Humidity HD Ta<60 ℃ - 90 %RH PG320240WRFDBAH31Q Page4 SAMPLE Ver.01 SPEC Edi.002 1.4 DC Electrical Characteristics VDD =5.0 V ± 10%,VSS = 0V,Ta = 25℃ Item Symbol Condition Min. Typ. Max. Unit Logic Supply Voltage VDD - 4.8 5.0 5.2 V “H” Input Voltage VIH - 0.5 VDD - VDD V “L” Input Voltage VIL - VSS - 0.2 VDD V “H” Output Voltage VOH IOH=-8mA VDD-0.4 - - V “L” Output Voltage VOL IOL=8mA - - VSS+0.4 V Supply Current IDD VDD=5.0V;VOP=22.0V; Pattern= Horizontal line *1 - 50 80 mA -20℃*2 21.9 22.1 22.3 25℃*2 21.8 22.0 22.2 70℃*2 21.5 21.7 21.9 LCM Driver Voltage VOP*2 V NOTE: *1 The Maximum current display; *2 The VOP test point is VOP+~VOP- PG320240WRFDBAH31Q Page5 SAMPLE Ver.01 SPEC Edi.002 1.5 Optical Characteristics LCD Panel:1/240Duty,1/15Bias,VLCD =22.0V,Ta =25℃ Item Symbol Rise tr Fall tf Top θ+ Bottom θ- Left θL Right θR Response Time Viewing angle range Conditions - Contrast Ratio C Average Brightness (with LCD) *2 IV C>2.0 - Min. Typ. Max. Unit Reference - 150 230 - 320 480 ms Note2 - 40 - - 40 - - 45 - Deg. Notes 1 - 45 - - 3.0 - - Note 3 25 35 - cd/m2 0.25 0.30 0.35 CIE Color Coordinate (With LCD)*2 x y 0.30 0.35 0.40 Uniformity *1 △B 70 - - IF=160mA nm Note 4 % Note 4 : 1:△B=B(min) / B(max) * 100% 2:Measurement Condition for Optical Characteristics: a:Environment: 25℃±5℃ / 60±20%R.H,no wind,dark room below 10 Lux at typical lamp current and typical operating frequency. b:Measurement Distance: 500 ± 50 ㎜ ,(θ= 0°) c:Equipment: TOPCON BM-7 fast,(field 1°),after 10 minutes operation. d:The uncertainty of the C.I.E coordinate measurement ±0.01,Average Brightness ± 4% 1 2 3 VIEW AREA 6 5 4 7 8 9 θθ 500 ㎜ LCM Colorimeter=BM-7 fast PG320240WRFDBAH31Q Page6 SAMPLE Ver.01 SPEC Edi.002 Note 1. Optical characteristics-2 Viewing angle Rear (12H) φ=90° Top (θ=0°) θL θR θ+ θ- Left (9H) φ=180° Right (3H) φ=0° Front (6H) φ=270° Viewing angle PG320240WRFDBAH31Q Page7 SAMPLE Ver.01 SPEC Edi.002 Note 2. Optical characteristics-3 Fig.2 Definition of response time Positive Type No selected waveform No selected waveform Selected waveform Transmittance 10% 90% 100% Tf Tr Negative Type No selected waveform No selected Selected waveform Transmittance 100% 90% 10% Tr PG320240WRFDBAH31Q Tf Page8 SAMPLE Ver.01 SPEC Edi.002 Electrical characteristics-2 ※2 Drive waveform Vop: Drive voltage 1/B: Bias N: Duty fF: Frame frequency fD: Drive frequency (1) Selected waveform 1 2 3 N 1 3 2 V Vop/B Vop/B V 1/fD 1/fF (2) Non- Selected wave form 1 2 3 N 1 2 3 (1-2/B)Vop Vop/B Vop/ (1-2/B)Vop 1/fD 1/fF Note: Frame frequency is defined as follows: Common side supply voltage peak - to - peak /2 = 1 period PG320240WRFDBAH31Q Page9 SAMPLE Ver.01 SPEC Edi.002 Note 3. : Definition of Vth Selected waveform 100 73% Transmittanc No selected waveform 50% Vth1 Vth2 Drive Active voltage range View direction Drive waveform Transmittance Vth1 10° (Selected waveform) 50% Vth2 40° (No selected waveform) 73% ※1 Contrast ratio = (Brightness in OFF state) / (Brightness in ON state) Outline of Electro-Optical Characteristics Measuring System Photo Detector θ Human Active Temperatur e Control Chamber ψ LCD Panel Transmissive Measuring System: Autronic DMS-803 PG320240WRFDBAH31Q Page10 SAMPLE Ver.01 SPEC Edi.002 1.6 Backlight Characteristics Maximum Ratings Item Symbol Conditions Min. Max. Unit Forward Current IF Ta =25℃ - 160 mA Reverse Voltage VR Ta =25℃ - 5 V Reverse Current IR VR=5V - 10 uA Power Dissipation PD Ta =25℃ - 0.8 W Item Symbol Conditions Min. Typ. Max. Unit Forward Voltage VF - 3.4 4.0 V Average Brightness (without LCD) IV 210 280 - cd/m2 X 0.25 0.28 0.31 Y 0.26 0.29 0.32 Electrical / Optical Characteristics CIE Color Coordinate (without LCD) IF=160mA Color PG320240WRFDBAH31Q - White Page11 SAMPLE Ver.01 SPEC Edi.002 2. MODULE STRUCTURE 2.1 Counter Drawing 2.1.1 LCM Mechanical Diagram * See Appendix 2.1.2 Block Diagram PG320240WRFDBAH31Q Page12 SAMPLE Ver.01 SPEC Edi.002 2.2 Interface Pin Description Pin No. Symbol Function 1 VSS Ground(Vss=0V) 2 VDD Power Supply 3 VLCD Operating Voltage for LCD 4 /RD Data read (read data from the module at”L”) 5 /WR Data write (write data to the module at “L”) 6 A0 7 DB0 Data bus 8 DB1 Data bus 9 DB2 Data bus 10 DB3 Data bus 11 DB4 Data bus 12 DB5 Data bus 13 DB6 Data bus 14 DB7 Data bus 15 /CS Chip select ,active “L” 16 /RES Reset input ,active “L” 17 VEE Negative voltage out 18 FG Frame ground (connect to metal bezel) 19 NC Not connection(Must be open) 20 NC Not connection(Must be open) Command/Data read or write select (H:command L:data) - (+) Power supply for LED backlight. ( Anode ).(Red Line) - (-) Power supply for LED backlight. ( Cathode ).(White Line) PG320240WRFDBAH31Q Page13 SAMPLE Ver.01 SPEC Edi.002 2.2.1 Refer Initial Code write_com(0x40); write_dat(0x30); write_dat(0x87); write_dat(0x07); write_dat(39); write_dat(65); write_dat(239); write_dat(0x28); write_dat(0x00); //initialize device and display write_com(0x44); write_dat(0x00); write_dat(0x00); write_dat(0xef); write_dat(0xb0); write_dat(0x04); write_dat(0xef); //Set display start address and display regions write_com(0x5a); write_dat(0x00); //set number of pixels to scroll=0 write_com(0x5b); write_dat(0x00); //select layerd screen composition and screen text/graphics mode write_com(0x58); write_dat(0x14); //set display off and display flashing write_com(0x5d); write_dat(0x07); write_dat(0x00); //set cursor type write_com(0x59); write_dat(0x14); //set display on and display flashing PG320240WRFDBAH31Q Page14 SAMPLE Ver.01 SPEC Edi.002 2.3 Timing Characteristics PG320240WRFDBAH31Q Page15 SAMPLE Ver.01 SPEC Edi.002 PG320240WRFDBAH31Q Page16 SAMPLE Ver.01 SPEC Edi.002 2.4 Display Command PG320240WRFDBAH31Q Page17 SAMPLE Ver.01 SPEC Edi.002 2.5 Jumper Short:JMS(2), JP(2), JDS(1), JE1, JE2, JF Open :All the jumper unnoted. PG320240WRFDBAH31Q Page18 SAMPLE Ver.01 SPEC Edi.002 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart Item Customer Sales Info Marketing & Design R&D Manufactur ing Q.A Product control Purchase Inventory control Survey Request Project Inquiry evaluation Project Validation NG OK Quote Contract Design check Sample test Sample Approval NG Verification NG OK Sample approval OK Pilot Pilot Run & Mass Product NG Verification OK Specification preparation Mass production OK Ship Out run & Reliability test Inspection NG Shipment PG320240WRFDBAH31Q Ship out Page19 SAMPLE Ver.01 SPEC Edi.002 Item Customer Sales Info Claim R&D Q.A Manufactu ring Product control Purchase Inventory control Failure analysis Sales Service Analysis report Corrective action Tracking 1. ISO 9001 Maintenance Activities Q.A 3. Equipment calibration Activity 5. Standardization Management PG320240WRFDBAH31Q 2. Process improvement proposal 4. Education And Training Activities Page20 SAMPLE Ver.01 SPEC Edi.002 3.2 Inspection Specification PG320240WRFDBAH31Q Page21 SAMPLE Ver.01 SPEC Edi.002 PG320240WRFDBAH31Q Page22 SAMPLE Ver.01 SPEC Edi.002 PG320240WRFDBAH31Q Page23 SAMPLE Ver.01 SPEC Edi.002 PG320240WRFDBAH31Q Page24 SAMPLE Ver.01 SPEC Edi.002 PG320240WRFDBAH31Q Page25 SAMPLE Ver.01 SPEC Edi.002 PG320240WRFDBAH31Q Page26 SAMPLE Ver.01 SPEC Edi.002 4. RELIABILITY TEST 4.1 Reliability Test Condition NO. TEST ITEM 1 High Temperature Storage Test 2 Low Temperature Storage Test 3 High Temperature / High Humidity Storage Test 4 Temperature Cycling Storage Test 5 ESD Test 6 Vibration Test (Packaged) 7 Drop Test (Packaged) (Ver.A01) TEST CONDITION Keep in +80 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. Keep in -30 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. Keep in +60 ℃ / 90% R.H duration for 96 hrs Surrounding temperature, then storage at normal condition 4hrs. (Excluding the polarizer) -30℃ → +25℃ → +80℃ → +25℃ (30mins) (5mins) (30mins) (5mins) 10 Cycle Surrounding temperature, then storage at normal condition 4hrs. Air Discharge: Contact Discharge: Apply 6 KV with 5 times Apply 250 V with 5 times Discharge for each polarity +/discharge for each polarity +/1. Temperature ambiance : 15℃~35℃ 2. Humidity relative : 30%~60% 3. Energy Storage Capacitance(Cs+Cd) : 150pF±10% 4. Discharge Resistance(Rd) : 330Ω±10% 5. Discharge, mode of operation : Single Discharge (time between successive discharges at least 1 sec) (Tolerance if the output voltage indication : ±5%) 1. Sine wave 10~55 Hz frequency (1 min/sweep) 2. The amplitude of vibration :1.5 mm 3. Each direction (X、Y、Z) duration for 2 Hrs Packing Weight (Kg) 0 ~ 45.4 Drop Height (cm) 122 45.4 ~ 90.8 76 90.8 ~ 454 61 Over 454 46 Drop Direction :※1 corner / 3 edges / 6 sides each 1time PG320240WRFDBAH31Q Page27 SAMPLE Ver.01 SPEC Edi.002 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 SAFETY 5.1.1 5.1.2 If the LCD panel breaks , be careful not to get the liquid crystal to touch your skin. If the liquid crystal touches your skin or clothes , please wash it off immediately by using soap and water. 5.2 HANDLING 5.2.1 5.2.2 5.2.3 5.2.4 5.2.5 5.2.6 5.2.7 5.2.8 5.2.9 Avoid any strong mechanical shock which can break the glass. Avoid static electricity which can damage the CMOS LSI—When working with the module , be sure to ground your body and any electrical equipment you may be using. Do not remove the panel or frame from the module. The polarizing plate of the display is very fragile. So , please handle it very carefully ,do not touch , push or rub the exposed polarizing with anything harder than an HB pencil lead (glass , tweezers , etc.) Do not wipe the polarizing plate with a dry cloth , as it may easily scratch the surface of plate. Do not touch the display area with bare hands , this will stain the display area. Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with a cleaning naphtha solvent. To control temperature and time of soldering is 320±10℃and 3-5 sec. To avoid liquid (include organic solvent) stained on LCM . 5.3 STORAGE 5.3.1 5.3.2 5.3.3 Store the panel or module in a dark place where the temperature is 25℃ ±5℃ and the humidity is below 65% RH. Do not place the module near organics solvents or corrosive gases. Do not crush , shake , or jolt the module. 5.4 TERMS OF WARRANTY 5.4.1 5.4.2 Applicable warrant period The period is within thirteen months since the date of shipping out under normal using and storage conditions. Unaccepted responsibility This product has been manufactured to your company’s specification as a part for use in your company’s general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment , we cannot take responsibility if the product is used in nuclear power control equipment , aerospace equipment , fire and security systems or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required. PG320240WRFDBAH31Q Page28 SAMPLE Ver.01 SPEC Edi.002