TECH. CORP. SPECIFICATIONS CUSTOMER : PTC SAMPLE CODE : SH800480T-013-I01Q MASS PRODUCTION CODE : PH800480T-013-I01Q SAMPLE VERSION : 02 SPECIFICATIONS EDITION : 005 DRAWING NO. (Ver.) : LMD-PH800480T-013-I01Q (Ver.003) PACKAGING NO. (Ver.) : PKG-PH800480T-013-I01Q (Ver.001) Customer Approved Date: Approved Checked Designer 黃秋源 Oliver Huang 李健弘 Lambert Lee 黃俊清 Ackey Huang POWERTIP 2013.03.08 □ Preliminary specification for design input ■ Specification for sample approval TW RD APR POWERTIP TECH. CORP. Headquarters: th No.8, 6 Road, Taichung Industrial Park, TEL: 886-4-2355-8168 E-mail: [email protected] FAX: 886-4-2355-8166 Http://www.powertip.com.tw Taichung, Taiwan 台中市 407 工業區六路 8 號 NO.PT-A-005-8 History of Version Date (mm / dd / yyyy) Ver. Edi. Description Page Design by 09/06/2012 01 001 New Drawing. - Ackey 09/24/2012 01 002 New Sample. - Ackey 12/07/2012 01 003 Modify Touch Panel Dimension. Appendix Ackey 01/23/2013 02 004 Second Sample. Appendix Ackey 03/07/2013 02 005 Update Inspection Specification. 21 Ackey Total: 27 Page PH800480T-013-I01Q Page2 SAMPLE Ver.02 SPEC Edi.005 Contents 1. SPECIFICATIONS 1.1 1.2 1.3 1.4 1.5 1.6 1.7 Features Mechanical Specifications Absolute Maximum Ratings DC Electrical Characteristics Optical Characteristics Backlight Characteristics Touch Panel Characteristics 2. MODULE STRUCTURE 2.1 Counter Drawing 2.1.1 2.1.2 2.2 2.3 LCM Mechanical Diagram Block Diagram Interface Pin Description Timing Characteristics 2.3.1 Signal AC Characteristics 2.3.2 Input Timing Setting 2.3.3 Power On/Off Characteristics 3. QUALITY ASSURANCE SYSTEM 3.1 3.2 Quality Assurance Flow Chart Inspection Specification 4. RELIABILITY TEST 4.1 Reliability Test Condition 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 Safety 5.2 Handling 5.3 Storage 5.4 Terms of Warranty Appendix：LCM Drawing LCM Packaging Specifications PH800480T-013-I01Q Page3 SAMPLE Ver.02 SPEC Edi.005 1. SPECIFICATIONS 1.1 Features 1.2 Item Standard Value Display Type 800 * (RGB) * 480 LCD Type a-Si TFT , Normally white , Transmissive type Screen size(inch) 7.0 inch Viewing Direction 6 O’clock Color configuration Anti-Glare Backlight Type LED B/L Weight 163 g Interface RGB Interface ROHS THIS PRODUCT CONFORMS THE ROHS OF PTC Detail information please refer web side : http://www.powertip.com.tw/news.php?area_id_view=1085560481/ Mechanical Specifications Item Standard Value Unit Outline Dimension 164.9 (W) * 100.0 (L) * 4.9 (H) mm Item Standard Value Unit Active Area 154.08 (W) * 85.92 (L) mm Item Standard Value Unit Active Area 155.2 (W) * 88.24 (L) mm LCD panel Touch panel Note：For detailed information please refer to LCM drawing. PH800480T-013-I01Q Page4 SAMPLE Ver.02 SPEC Edi.005 1.3 Absolute Maximum Ratings Module Item Symbol Condition Min. Max. Unit -0.3 5.0 V 6.5 13.5 V -0.3 40 V DVDD AVDD Power Supply Voltage GND=0 VGH VGL AGND=0 -20 0.3 V VGH - VGL - 0 40 V Operating Temperature TOP Excluded T/P -20 60 °C Storage Temperature TST Excluded T/P -30 70 °C Remark - The absolute maximum rating values of this product are not allowed to be exceeded at any times. Should a module be used with any of the absolute maximum ratings exceeded, the characteristics of the module may not be recovered, or in an extreme case, the module may be permanently destroyed. 1.4 DC Electrical Characteristics GND = 0V, Ta = 25°C Module Item Supply Voltage VCOM Input signal Voltage Supply Current Symbol Min. Typ. Max. DVDD 3.0 3.3 3.6 VGH 15.3 16.0 16.7 VGL -7.7 -7.0 -6.3 AVDD 10.2 10.4 10.6 VCOM - 3.9 - VIH 0.7DVDD - DVDD VIL 0 - 0.3DVDD - 80 - - 80 120 IDD Unit Remark V V V mA Pattern= Full display Pattern= Black *1 Note1: Maximum current display. PH800480T-013-I01Q Page5 SAMPLE Ver.02 SPEC Edi.005 1.5 Optical Characteristics DVDD = 3.3 V, Ta=25°C TFT LCD Module Item Symbol Condition Min. Typ. Max. Rise Tr - 10 20 Fall Tf Ta = 25°C θX, θY = 0° - 15 30 Top θY+ 40 50 - Bottom θY- 60 70 - Left θX- 60 70 - Right θX+ 60 70 - CR 200 250 - X 0.24 0.29 0.34 Y 0.25 0.30 0.35 0.51 0.56 0.61 0.29 0.34 0.39 0.28 0.33 0.38 Y 0.52 0.57 0.62 X 0.09 0.14 0.19 Y 0.02 0.07 0.12 Response time Viewing angle Contrast ratio White Color of CIE Red Coordinate （With B/L & touch Green panel） Blue X Y X CR ≥ 10 Ta = 25°C θX , θY = 0° unit ms Note 2 Deg. Note 4 Note 3 - Note1 Average Brightness Pattern=white display (With B/L & touch panel)*1 IV - 200 250 - cd/m2 Note1 Uniformity (With B/L & touch panel)*2 △B - 70 - - % Note1 PH800480T-013-I01Q Page6 SAMPLE Ver.02 SPEC Edi.005 Note 1: *1：△B=B(min) / B(max) * 100% *2：Measurement Condition for Optical Characteristics: a：Environment: 25℃±5℃ / 60±20%R.H，no wind，dark room below 10 Lux at typical lamp current and typical operating frequency. b：Measurement Distance: 500 ± 50 ㎜ ，(θ= 0°) c：Equipment: TOPCON BM-7 fast，(field 1°)，after 10 minutes operation. d：The uncertainty of the C.I.E coordinate measurement ±0.01，Average Brightness ± 4% 1 2 3 VIEW AREA 6 5 4 7 8 θθ 9 500 ㎜ LCM Colorimeter=BM-7 fast To be measured at the center area of panel with a viewing cone of 1° by Topcon luminance meter BM-7, after 10 minutes operation (module) Note2: Definition of response time: The output signals of photo detector are measured when the input signals are changed from “black” to “white”(falling time) and from “white” to “black”(rising time), respectively. The response time is defined as the time interval between the 10% and 90% of Amplitudes. Refer to figure as below: Normally White "White" "Black" "White" Signal (Relative value) 100% 90% 10% 0% Tr PH800480T-013-I01Q Tf Page7 SAMPLE Ver.02 SPEC Edi.005 Normally Black "Black" "White" "Black" Signal (Relative value) 100% 90% 10% 0% Tr Tf Note3: Definition of contrast ratio: Contrast ratio is calculated with the following formula Photo detector output when LCD is at “White” state Contrast ratio (CR) = Photo detector output when LCD is at “Black” state Note4: Definition of viewing angle: Refer to figure as below: θX = θY = 0 ° 12H Φ = 180 ° Φ = 270 ° θY - θY + θY + = 9 0 ° θX - = 9 0 ° Y+ X- θX θX + Φ= 90 ° Φ θX + = 9 0 ° X+ Y6 H Φ= 0 ° θY - = 9 0 ° PH800480T-013-I01Q Page8 SAMPLE Ver.02 SPEC Edi.005 1.6 Backlight Characteristics Maximum Ratings Item Symbol Min. Max. Unit LED Forward Current IF 25 mA LED Reverse Voltage VR 1.2 V Remark One LED Electrical / Optical Characteristics Item Symbol Min. Typ. Max. Unit Remark LED Voltage VL 9.3 9.9 10.5 V Note1 LED Current IL 140 160 180 mA - LED life time - 20000 - - Hr Note2 Note 1: The LED Supply Voltage is defined by the number of LED at Ta=25℃ and IL =180mA. Note 2: The “LED life time” is defined as the module brightness decrease to 50% original brightness at Ta=25℃ and IL =160mA. The LED lifetime could be decreased if operating IL is lager than 160mA. VLED+ VLED- PH800480T-013-I01Q Page9 SAMPLE Ver.02 SPEC Edi.005 1.7 Touch Screen Characteristic Item Input Method ITO Glass ITO Film Specification Stylus or Finger. Sheet Resistance:400±100Ω Hard-Coating & Anti-glare Sheet Resistance:400±100Ω Operating Temperature -10℃~60℃,20~85%RH(Non Condensing) Storage Temperature ¥ -20℃~70℃,10~90%RH(Non Condensing) Hitting Life 3H pencil, pressure 1N/45 ≧1,000,000 times Writing Life ≧100,000 times Insulation ≧20MΩ/25V(DC) Transparency Linearity Operating Force Chattering Impact Resistance Static load resistance PH800480T-013-I01Q ≧78% X≦1.5%,Y≦1.5% 20-100g ≦10ms 13.0ψDIA. Steel Ball/9g Height=30cm 500g within 30 cm² area for 30sec Page10 SAMPLE Ver.02 SPEC Edi.005 2. MODULE STRUCTURE 2.1 Counter Drawing 2.1.1 LCM Mechanical Diagram * See Appendix 2.1.2 Block Diagram PH800480T-013-I01Q Page11 SAMPLE Ver.02 SPEC Edi.005 2.2 Interface Pin Description SYMBOL 1 VLED+ Power For LED backlight (+). Power 2 VLED+ Power For LED backlight (+). Power 3 VLED- Power For LED backlight (-). Power 4 VLED- Power For LED backlight (-). Power 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 GND Vcom DVDD MODE DE VS HS B7 B6 B5 B4 B3 B2 B1 B0 G7 G6 G5 G4 G3 G2 G1 G0 R7 R6 R5 R4 R3 R2 R1 R0 GND DCLK PH800480T-013-I01Q DESCRIPTION Type:Remark Pin NO. Power ground. Common voltage. Power for Digital Circuit. DE/SYNC mode select. Data Input Enable. Vertical Sync Input. Horizontal Sync Input. Blue Data(MSB). Blue Data. Blue Data. Blue Data. Blue Data. Blue Data. Blue Data. Blue Data(LSB). Green Data(MSB). Green Data. Green Data. Green Data. Green Data. Green Data. Green Data. Green Data(LSB). Red Data(MSB). Red Data. Red Data. Red Data. Red Data. Red Data. Red Data. Red Data(LSB). Power Ground Sample clock Page12 Power I I I,Note 1 I I I I I I I I I I:Note 2 I:Note 2 I I I I I I I:Note 2 I:Note 2 I I I I I I I:Note 2 I:Note 2 Power I:Note 3 SAMPLE Ver.02 SPEC Edi.005 Pin NO. 38 39 40 41 42 43 44 45 46 47 48 49 50 SYMBOL GND L/R U/D VGH VGL AVDD RESET NC VCOM DITHB GND NC NC I:input DESCRIPTION Power Ground. Left / right selection. Left / right selection. Gate On Voltage. Gate OFF Voltage. Power for Analog Circuit. Global reset pin. No connection. Common Voltage. Dithering Function. Power Ground. No connection. No connection. Type:Remark Power I:Note 4,5 I:Note 4,5 Power Power Power I:Note 6 I I:Note 7 Power - Note 1: DE/SYNC mode select. Normally pull high. When select DE mode, MODE=”1”, VS and HS must pull high. When select SYNC mode, MODE= ”0”, DE must be grounded. Note 2: When input 18 bits RGB data, the two low bits of R,G and B data must be grounded. Note 3: Data shall be latched at the falling edge of DCLK. Note 4: Selection of scanning mode. Note 5: Definition of scanning direction. Refer to the figure as below: PH800480T-013-I01Q Page13 SAMPLE Ver.02 SPEC Edi.005 UP Right Left Down Note 6: Global reset pin. Active low to enter reset state. Suggest to connect with an RC reset circuit for stability. Normally pull high. Note 7: Dithering function enable control, normally pull high. When DITHB=”1”,Disable internal dithering function. When DITHB=”0”,Enable internal dithering function. Touch Panel Pin Description Pin No. 1 2 3 4 Symbol X+ YXY+ PH800480T-013-I01Q Function RIGHT.(XR) BOTTOM.(YB) LEFT.(XL) TOP.(YT) Page14 SAMPLE Ver.02 SPEC Edi.005 2.3 Timing Characteristics 2.3.1 Signal AC Characteristics PH800480T-013-I01Q Page15 SAMPLE Ver.02 SPEC Edi.005 2.3.2 Input Timing Setting Horizontal input timing diaqram PH800480T-013-I01Q Page16 SAMPLE Ver.02 SPEC Edi.005 Vertical input timing diaqram PH800480T-013-I01Q Page17 SAMPLE Ver.02 SPEC Edi.005 2.3.3 Power On/Off Characteristics PH800480T-013-I01Q Page18 SAMPLE Ver.02 SPEC Edi.005 3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart Item Customer Sales Info Marketing & Design R&D Manufactu Product Inventory Purchase ring control control Q.A Survey Request Project Inquiry evaluation Project Validation NG OK Quote Contract Design check Sample test Sample Approval NG Verification NG OK Sample approval OK Pilot Pilot Run & Mass Product NG Verification OK Specification preparation Mass production OK Ship Out PH800480T-013-I01Q run & Reliability test Inspection NG Shipment Ship out Page19 SAMPLE Ver.02 SPEC Edi.005 Item Customer Sales Info Claim R&D Manufact Product Inventory Purchase uring control control Q.A Failure analysis Sales Service Analysis report Corrective action Tracking 1. ISO 9001 Maintenance Activities Q.A 3. Equipment calibration Activity 5. Standardization Management PH800480T-013-I01Q 2. Process improvement proposal 4. Education And Training Activities Page20 SAMPLE Ver.02 SPEC Edi.005 3.2. Inspection Specification ◆Scope ：The document shall be applied to PH800480T-013-I01Q(Ver.01). PH800480T-013-I01Q Page21 SAMPLE Ver.02 SPEC Edi.005 ◆Specification For PH800480T-013-I01Q： PH800480T-013-I01Q (Ver.01) Page22 SAMPLE Ver.02 SPEC Edi.005 ◆Specification For PH800480T-013-I01Q： PH800480T-013-I01Q (Ver.01) Page23 SAMPLE Ver.02 SPEC Edi.005 ◆Specification For PH800480T-013-I01Q： PH800480T-013-I01Q (Ver.01) Page24 SAMPLE Ver.02 SPEC Edi.005 ◆Specification For PH800480T-013-I01Q： PH800480T-013-I01Q (Ver.01) Page25 SAMPLE Ver.02 SPEC Edi.005 4. RELIABILITY TEST 4.1 (Ver.B01) Reliability Test Condition NO. TEST ITEM TEST CONDITION 1 High Temperature Storage Test Keep in +80 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. 2 Low Temperature Storage Test Keep in -30 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs. 3 High Temperature / High Humidity Storage Test Keep in +60℃ / 90% R.H duration for 96 hrs Surrounding temperature, then storage at normal condition 4hrs. (Excluding the polarizer) -30℃ → 4 Temperature Cycling Storage Test +25℃ (30mins) (5mins) (30mins) (5mins) 10 Cycle Surrounding temperature, then storage at normal condition 4hrs. Air Discharge: Apply 2 KV with 5 times Discharge for each polarity +/- 5 6 ESD Test Vibration Test (Packaged) Drop Test (Packaged) Contact Discharge: Apply 250 V with 5 times discharge for each polarity +/- 1. Temperature ambiance : 15℃∼35℃ 2. Humidity relative : 30%∼60% 3. Energy Storage Capacitance(Cs+Cd) : 150pF±10% 4. Discharge Resistance(Rd) : 330Ω±10% 5. Discharge, mode of operation : Single Discharge (time between successive discharges at least 1 sec) (Tolerance if the output voltage indication : ±5%) 1. Sine wave 10∼55 Hz frequency (1 min) 2. The amplitude of vibration :1.5 mm 3. Each direction (X、Y、Z) duration for 2 Hrs Packing Weight (Kg) 0 ~ 45.4 7 → +80℃ → +25℃ Drop Height (cm) 122 45.4 ~ 90.8 76 90.8 ~ 454 61 Over 454 46 Drop direction :※1 corner / 3 edges / 6 sides each 1times PH800480T-013-I01Q Page26 SAMPLE Ver.02 SPEC Edi.005 5. PRECAUTION RELATING PRODUCT HANDLING 5.1 SAFETY 5.1.1 5.1.2 If the LCD panel breaks , be careful not to get the liquid crystal to touch your skin. If the liquid crystal touches your skin or clothes , please wash it off immediately by using soap and water. 5.2 HANDLING 5.2.1 5.2.2 5.2.8 Avoid any strong mechanical shock which can break the glass. Avoid static electricity which can damage the CMOS LSI—When working with the module , be sure to ground your body and any electrical equipment you may be using. Do not remove the panel or frame from the module. The polarizing plate of the display is very fragile. So , please handle it very carefully ,do not touch , push or rub the exposed polarizing with anything harder than an HB pencil lead (glass , tweezers , etc.) Do not wipe the polarizing plate with a dry cloth , as it may easily scratch the surface of plate. Do not touch the display area with bare hands , this will stain the display area. Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with a cleaning naphtha solvent. To control temperature and time of soldering is 320±10℃and 3-5 sec. 5.2.9 To avoid liquid (include organic solvent) stained on LCM . 5.2.3 5.2.4 5.2.5 5.2.6 5.2.7 5.3 STORAGE 5.3.1 Store the panel or module in a dark place where the temperature is 25℃ ±5℃ 5.3.2 5.3.3 and the humidity is below 65% RH. Do not place the module near organics solvents or corrosive gases. Do not crush , shake , or jolt the module. 5.4 TERMS OF WARRANTY 5.4.1 5.4.2 Applicable warrant period The period is within thirteen months since the date of shipping out under normal using and storage conditions. Unaccepted responsibility This product has been manufactured to your company’s specification as a part for use in your company’s general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment , we cannot take responsibility if the product is used in nuclear power control equipment , aerospace equipment , fire and security systems or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required. PH800480T-013-I01Q Page27 SAMPLE Ver.02 SPEC Edi.005