D1U System Connection www.murata-ps.com D1U-W-1200, D1U-W-1600 and D1U-W-2000 Application Note D1U MATING CONNECTORS 12V D1U mating connector 48V D1U mating connector Solder 1 Press Fit Solder 1 Press Fit Straight Right Angle Straight Right Angle Straight Right Angle Straight Right Angle MPS N/A N/A N/A 36-0430032-0 N/A Pending N/A 36-0440026-0 FCI 5174210802400CALF 5176210802400CBLF 5174210802400AALF 5176210802400ABLF 5174210602000CALF 5176210602000CBLF 5174210602000AALF 5176210602000ABLF 1 Solder connector recommended for board thickness of <0.090 Recommended layout for 12V D1U right angle connectors All dimensions in inches (mm) 5.902 (149.90) For full details go to www.murata-ps.com/rohs www.murata-ps.com/support 14 Nov 2012 ACAN25.A04 Page 1 of 5 D1U System Connection D1U-W-1200, D1U-W-1600 and D1U-W-2000 Application Note Recommended layout for 48V D1U right angle connectors 149.90 (5.902) All dimensions in inches (mm) Recommended layout for 12V D1U straight connectors A A 4.750 (120.65) 2.900 (73.65) 0.317 (8.04) 0.630 (16.00) REF A 0.906 (23.00) 1.772 (45.00) MIN 4.75"x0.906" opening for air flow All dimensions in inches (mm) www.murata-ps.com/support 14 Nov 2012 ACAN25.A04 Page 2 of 5 D1U System Connection D1U-W-1200, D1U-W-1600 and D1U-W-2000 Application Note Recommended layout for 48V D1U straight connectors 2.300 (58.41) A A 4.750 (120.65) 0.982 (24.93) 0.630 (16.00) REF A 0.906 (23.00) 1.772 (45.00) MIN 4.75"x0.906" opening for air flow All dimensions in inches (mm) www.murata-ps.com/support 14 Nov 2012 ACAN25.A04 Page 3 of 5 D1U System Connection D1U-W-1200, D1U-W-1600 and D1U-W-2000 Application Note OUTPUT CONNECTOR AND SIGNAL SPECIFICATION - 12V D1U DC and Signal Connector: Tyco Part # 1-6450132-2, or FCI PowerBlade # 51732-021 P1 VOUT P2 VOUT P3 VRTN P4 VRTN P5 VRTN P6 VRTN P7 VOUT P8 x1 x2 x3 x4 x5 x6 AC_OK P_GOOD V_SB RETURN V_SB RETURN V_SB +OUT V_SB +OUT D SPARE SPARE V_SB RETURN V_SB RETURN V_SB +OUT V_SB +OUT C I_SHARE I2C ADR0 I2C ADR1 I2C ADR2 PS_KILL PS_ PRESENT B SENSE + SENSE - I2C DATA I2C CLOCK SPARE PS_ON A VOUT mate-last pins High Level Low Level Pin Assignment Signal Name Description I Max P1, P2, P7, P8 P3, P4, P5, P6 VOUT VRTN A1 Sense + A2 Sense - C5, C6, D5, D6 C3, C4, D3, D4 B1 V_SB V_SB Return I_Share Main output voltage Main output voltage, return VOUT remote sense, positive node input, connected to the +ve load point VOUT remote sense, negative node input, connected to the -ve load point Standby voltage output Standby voltage, return, tied internally to Output Return Active load sharing bus 0 – 8V -4 mA / +5 mA >2.4V (active, OK) <0.4V +4 mA -2 mA D1 AC_OK Input AC Voltage “OK” signal output (Internal pull up is 10kΩ to Vsb) D2 P_Good Power good signal output (Internal pull up is 10kΩ to Vsb) >2.4V (active, Good) <0.4V +4 mA -2 mA B5 PS_Kill Floating pin will turn off P/S (shorter pin, last-make and first-break contact for hot plugging). This signal overrides PS-On in disabling the Main Output >2.1V (open, or Vsb) <0.7V (active, PS:On) N/A B6 PS_Present Internally tied to Vsb return 0V A6 PS_On Internal 1K ohm pull-up to Vsb, (accepts open collector/ drain drive), This signal to be pulled low to turn-on power supply >2.1V (open, or Vsb) <0.7V (active, PS:On) A3 A4 I2C Data I2C Clock I2C serial data bus I2C serial clock bus B2 I2C Adr0 Address input 0, internal pull-up to Vsb B3 I2C Adr1 Address input 1, internal pull-up to Vsb B4 I2C Adr2 Address input 2, internal pull-up to Vsb Vsb Vsb >2.1V, < Vsb <0.8V >2.1V, <Vsb <0.8V >2.1V, <Vsb <0.8V -4 mA -1 mA ±1 mA ±1 mA ±1 mA www.murata-ps.com/support 14 Nov 2012 ACAN25.A04 Page 4 of 5 D1U System Connection D1U-W-1200, D1U-W-1600 and D1U-W-2000 Application Note OUTPUT CONNECTOR AND SIGNAL SPECIFICATION - 48V D1U DC and Signal Connector: Tyco Part # 1-6450332-7, or FCI PowerBlade # 51732-028 P1 P2 VOUT VOUT P3 VOUT P4 VRTN P5 VRTN P6 x1 x2 x3 x4 x5 AC_OK P_GOOD V_SB +OUT V_SB RETURN V_SB RETURN D PS_ON V_SB +OUT V_SB +OUT V_SB RETURN V_SB RETURN C I_SHARE I2C ADR0 I2C ADR1 I2C ADR2 PS_ PRESENT B PS_KILL VOUT SENSE+ VOUT SENSE- I2C DATA I2C CLOCK A VRTN High Level Low Level I Max Main output voltage Main output voltage, return VOUT remote sense, positive node input, connected to the +ve load point VOUT remote sense, negative node input, connected to the -ve load point Standby voltage output Standby voltage, return, tied internally to Output Return Active load sharing bus 0 – 8V -4 mA / +5 mA AC_OK Input AC Voltage “OK” signal output (Internal pull up is 10kΩ to Vsb) >2.4V (active, OK) <0.4V +4 mA -2 mA D2 P_Good Power good signal output (Internal pull up is 10kΩ to Vsb) >2.4V (active, Good) <0.4V +4 mA -2 mA A1 PS_Kill Floating pin will turn off P/S (shorter pin, last-make and first-break contact for hot plugging). This signal overrides PS-On in disabling the Main Output >2.1V (open, or Vsb) <0.7V (active, PS:On) N/A B5 PS_Present Internally tied to Vsb return 0V C1 PS_On Internal 1K ohm pull-up to Vsb, (accepts open collector/ drain drive), This signal to be pulled low to turn-on power supply >2.1V (open, or Vsb) <0.7V (active, PS:On) A4 A5 I2C Data I2C Clock I2C serial data bus I2C serial clock bus B2 I2C Adr0 Address input 0, internal pull-up to Vsb B3 I2C Adr1 Address input 1, internal pull-up to Vsb B4 I2C Adr2 Address input 2, internal pull-up to Vsb Pin Assignment Signal Name Description P1, P2, P3 P4, P5, P6 VOUT VRTN A2 Sense + A3 Sense - C2, C3, D3 C4, C5, D4, D5 B1 V_SB V_SB Return I_Share D1 Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. ISO 9001 and 14001 REGISTERED Vsb Vsb >2.1V, < Vsb <0.8V >2.1V, <Vsb <0.8V >2.1V, <Vsb <0.8V -4 mA -1 mA ±1 mA ±1 mA ±1 mA This product is subject to the following operating requirements and the Life and Safety Critical Application Sales Policy: Refer to: http://www.murata-ps.com/requirements/ Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2012 Murata Power Solutions, Inc. www.murata-ps.com/support 14 Nov 2012 ACAN25.A04 Page 5 of 5