MA01-HI SERIES - MINMAX Technology

MA01-HI SERIES
DC/DC CONVERTER 1W, High Isolation,SIP-Package
FEATURES
►Industrial Standard SIP-7 Package
►Ultra-high I/O Isolation 5200VDC
►Common Mode Transient Immunity : 15KV/µs
►Qualified for IGBT and High Isolation Applications
►Operating Ambient Temp. Range -40℃ to +95℃
►UL/cUL/IEC/EN 60950-1 Safety Approval
PRODUCT OVERVIEW
The MINMAX MA01-HI series is a new range of isolated 1W DC/DC converter modules in SIP-package which feature a very high I/O-isolation voltage rated
for 5200V.A very high common mode transient immunity qualifies these product for IGBT applications.There are 40 Models available for 5, 12, 15 or 24VDC
input.These converters offer a cost-effective solution for all applications where a very high I/O –isolation is required.
Model Selection Guide
Model
Number
MA01-05S033HI
MA01-05S05HI
MA01-05S09HI
MA01-05S12HI
MA01-05S15HI
MA01-05D05HI
MA01-05D09HI
MA01-05D12HI
MA01-05D15HI
Input
Voltage
(Range)
VDC
5 ±10%
MA01-05A1509HI
MA01-12S033HI
MA01-12S05HI
MA01-12S09HI
MA01-12S12HI
MA01-12S15HI
MA01-12D05HI
MA01-12D09HI
MA01-12D12HI
MA01-12D15HI
12 ±10%
MA01-12A1509HI
MA01-15S033HI
MA01-15S05HI
MA01-15S09HI
MA01-15S12HI
MA01-15S15HI
MA01-15D05HI
MA01-15D09HI
MA01-15D12HI
MA01-15D15HI
15 ±10%
MA01-15A1509HI
MA01-24S033HI
MA01-24S05HI
MA01-24S09HI
MA01-24S12HI
MA01-24S15HI
MA01-24D05HI
MA01-24D09HI
MA01-24D12HI
MA01-24D15HI
24 ±10%
MA01-24A1509HI
E-mail:[email protected]
2015/07/31 REV:4
Output
Voltage
VDC
3.3
5
9
12
15
±5
±9
±12
±15
15
-9
3.3
5
9
12
15
±5
±9
±12
±15
15
-9
3.3
5
9
12
15
±5
±9
±12
±15
15
-9
3.3
5
9
12
15
±5
±9
±12
±15
15
-9
Output Current
Max.
mA
303
200
111
84
66
±100
±56
±42
±33
+33
-55
303
200
111
84
66
±100
±56
±42
±33
+33
-55
303
200
111
84
66
±100
±56
±42
±33
+33
-55
303
200
111
84
66
±100
±56
±42
±33
+33
-55
Tel:886-6-2923150
Page 1 of 4
Input Current
@Max. Load
mA(typ.)
286
286
266
261
254
282
269
262
254
@No Load
mA(typ.)
35
Load
Regulation
Max. capacitive
Load
% (max.)
20
15
10
10
10
15
10
10
10
μF
1000
470
470
220
220
220#
220#
100#
100#
100
220
1000
470
470
220
220
220#
220#
100#
100#
100
220
1000
470
470
220
220
220#
220#
100#
100#
100
220
1000
470
470
220
220
220#
220#
100#
100#
100
220
# For each output
260
10
117
117
110
108
104
116
111
108
104
20
15
10
10
10
15
10
10
10
17
107
10
95
95
89
90
84
94
90
86
84
20
15
10
10
10
15
10
10
10
16
87
10
60
60
56
53
52
59
56
55
53
20
15
10
10
10
15
10
10
10
55
12
10
Efficiency
(typ.)
@Max. Load
%
70
70
75
77
78
71
75
77
78
76
71
71
76
78
79
72
76
78
79
77
70
70
75
75
79
71
75
78
79
76
70
70
75
78
80
71
75
77
78
75
MA01-HI SERIES
DC/DC CONVERTER 1W, High Isolation,SIP-Package
Input Specifications
Parameter
Input Surge Voltage (1 sec. max.)
Input Voltage Range
Input Filter
Model
5V Input Models
12V Input Models
15V Input Models
24V Input Models
5V Input Models
12V Input Models
15V Input Models
24V Input Models
All Models
Min.
-0.7
-0.7
-0.7
-0.7
4.5
10.8
13.5
21.6
Conditions
Min.
-------
Typ.
Max.
9
--18
--20
--30
--5
5.5
12
13.2
15
16.5
24
26.4
Internal Capacitor
Unit
VDC
Output Specifications
Parameter
Output Voltage Setting Accuracy
Output Voltage Balance
Line Regulation
Load Regulation
Ripple & Noise
Temperature Coefficient
Short Circuit Protection
Typ.
Max.
--±5.0
Dual Output, Balanced Loads
±0.1
±1.0
For Vin Change of 1%
±1.2
--Io=20% to 100%
See Model Selection Guide
0-20MHz Bandwidth
----100
--±0.01
±0.02
Continuous, Automatic Recovery
Unit
%Vnom.
%
%
mV P-P
%/℃
General Specifications
Parameter
Conditions
Rated for 60 seconds
Tested for 1 second
500 VDC
100KHz, 1V
Typ.
Max.
------------7
------100
--MIL-HDBK-217F@25℃, Ground Benign
2,000,000
UL/cUL 60950-1 recognition (CSA certificate), IEC/EN 60950-1(CB-report)
I/O Isolation Voltage
I/O Isolation Resistance
I/O Isolation Capacitance
Common Mode Transient Immunity
Switching Frequency
MTBF (calculated)
Safety Approvals
Min.
5200
5700
10
--15
---
Unit
VDC
VDC
GΩ
pF
KV/μs
KHz
Hours
Environmental Specifications
Parameter
Operating Ambient Temperature Range
(See Power Derating Curve)
Case Temperature
Storage Temperature Range
Humidity (non condensing)
Cooling
Lead Temperature (1.5mm from case for 10Sec.)
Conditions
Min.
Max.
Unit
Natural Convection
-40
+85
℃
+100
+125
95
℃
℃
% rel. H
260
℃
---55
--Natural Convection
---
Power Derating Curve
Output Power (%)
100
80
Natural
Convection
20LFM
60
400LFM
40
20
0
~
-40
50
60
70
80
Ambient Temperature C
E-mail:[email protected]
2015/07/31 REV:4
Tel:886-6-2923150
Page 2 of 4
90
100
110
MA01-HI SERIES
DC/DC CONVERTER 1W, High Isolation,SIP-Package
Notes
1
2
3
4
5
6
Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted.
These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules;
however they may not meet all specifications listed.
We recommend to protect the converter by a slow blow fuse in the input supply line.
Other input and output voltage may be available, please contact factory.
That “natural convection” is about 20LFM but is not equal to still air (0 LFM).
Specifications are subject to change without notice.
Package Specifications
Mechanical Dimensions
Pin Connections
0.5
[0.02]
10.2 [0.40]
3.2
[0.13]
0.5 [0.02]
19.5 [0.77]
2.54
[0.10]
7.62
[0.30]
Pin
Single Output
Dual Output
1
+Vin
+Vin
2
-Vin
-Vin
5
-Vout
-Vout
6
No Pin
Common
7
+Vout
+Vout
2X2.54
2X[0.10]
7.1 [0.28]
18.5 [0.73]
Bottom View
6
7
0.50 [0.02]
2.0 [0.08]
5
0.25 [0.01]
2
1
Physical Characteristics
Case Size
:
19.5x7.1x10.2mm (0.77x0.28x0.40 inches)
Case Material
:
Non-Conductive Black Plastic (flammability to UL 94V-0 rated)
Pin Material
:
Alloy 42
Weight
:
2.4g
E-mail:[email protected]
2015/07/31 REV:4
Tel:886-6-2923150
Page 3 of 4
►All dimensions in mm (inches)
►Tolerance: X.X±0.5 (X.XX±0.02)
X.XX±0.25 ( X.XXX±0.01)
►Pins ±0.05(±0.002)
MA01-HI SERIES
DC/DC CONVERTER 1W, High Isolation,SIP-Package
Test Setup
Peak-to-Peak Output Noise Measurement Test
Use a Cout 0.33μF ceramic capacitor. Scope measurement should be made by using a BNC socket, measurement bandwidth is 0-20 MHz. Position the load
between 50 mm and 75 mm from the DC/DC Converter.
+Vin
+Out
Copper Strip
Single Output
DC / DC
Converter
-Vin
Cout
-Out
Scope
Resistive
Load
Copper Strip
+Vin
+Out
Copper Strip
Dual Output
DC / DC
Converter
Com.
Copper Strip
-Vin
-Out
Scope
Cout
Resistive
Load
Cout
Scope
Copper Strip
Technical Notes
Maximum Capacitive Load
The MA01-HI series has limitation of maximum connected capacitance at the output. The power module may be operated in current limiting mode during start-up,
affecting the ramp-up and the startup time. The maximum capacitance can be found in the data sheet.
Input Source Impedance
The power module should be connected to a low ac-impedance input source. Highly inductive source impedances can affect the stability of the power module. In
applications where power is supplied over long lines and output loading is high, it may be necessary to use a capacitor at the input to ensure startup.
Capacitor mounted close to the power module helps ensure stability of the unit, it is recommended to use a good quality low Equivalent Series Resistance (ESR <
1.0Ω at 100 KHz) capacitor of a 2.2μF for the 5V input devices, a 1.0μF for the 12V,15V input devices and a 0.47μF for the 24V devices.
+
DC Power
Source
+Vin
+
+Out
DC / DC
Converter
Load
Cin
-
-Vin
-Out
Output Ripple Reduction
A good quality low ESR capacitor placed as close as practicable across the load will give the best ripple and noise performance. To reduce output ripple, it is
recommended to use 1.0μF capacitors at the output.
+
+Vin
DC Power
Source
-
+
DC Power
Source
-
+Out
Single Output
DC / DC
Converter
-Vin
+
Cout
Load
-
+ Out
+ Vin
Dual Output
DC / DC Com.
Converter
Cout1
Load1
- Vin
Cout2
Load2
+Out
Dual Output
DC / DC Com.
Converter
DC Power
Source
-Out
- Out
+Vin
-Vin
-Out
Cout
Load
Load
Cout
Thermal Considerations
Many conditions affect the thermal performance of the power module, such as orientation, airflow over the module and board spacing. To avoid exceeding the
maximum temperature rating of the components inside the power module, the case temperature must be kept below 100℃. The derating curves are determined from
measurements obtained in a test setup.
Position of air velocity
probe and thermocouple
15mm / 0.6in
50mm / 2in
Air Flow
DUT
18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan
Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: [email protected]
Minmax Technology Co., Ltd.
2015/07/31 REV:4
Page 4 of 4