AAF-05 SERIES AC/DC Power Module 5W FEATURES ►Ultra Compact Size 1.0 x 1.0 x 0.64" (25.4 x 25.4 x 16.3mm) ►Fully Encapsulated Module with Solder Pins for PCB Mount ►Universal Input 85 – 264VAC ►Protection Class II as per IEC/EN 60536 ►Regulated Single Outputs from 3.3 to 48VDC ►Operating Temp. Range -25℃ to +70℃ ►Overload/Voltage and Short Circuit Protection ►EMI Emission meets EN55011/22 Class B & FCC Level B ►EMC Immunity meets EN61000-4-2,3,4,5,6,8,11 ►Eco Design, No Load Input Power 300mW max. ►Safety Approval to UL/cUL/IEC/EN 60950-1, TUV IEC/EN 60335-1 (Pending) ►CE Marking with EMC and LVD PRODUCT OVERVIEW The new AAF-05 Series from MINMAX is a range of ultra-small, fully encapsulated 5 Watt AC/DC power supply modules. They are designed for easy PCB mounting with solder pins.The modules feature EMI-filter to meet EN 55011/55022, class B and EN 55014. EMC immunity complies with EN 61000-6-1. The low stand-by power consumption complies with European ErP Directive 2009/125/EC. Universal input voltage range of 85-264VAC and an International safety approval package qualifies these power modules for worldwide markets. The AAF-05 power supplies provide a cost effective solution for space critical applications in consumer appliances and instrumentation and communication equipment. Model Selection Guide Model Number Output Voltage VDC 3.3 5 9 12 15 24 48 AAF-05S03 AAF-05S05 AAF-05S09 AAF-05S12 AAF-05S15 AAF-05S24 AAF-05S48 Output Current Input Current Max. Peak(1) @Max. Load mA 1515 1000 555 416 333 208 104 mA 1970 1300 721 540 433 270 135 mA(typ.) 117 108 106 106 104 104 102 Max. Capacitive Load Efficiency (typ.) @Max. Load μF 2200 1000 300 160 100 43 10 % 74 80 82 82 83 83 85 Input Specifications Parameter Model Input Voltage Range Input Frequency Range All Models Input Voltage Range No-Load Power Consumption Inrush Current (Cold Start at 25℃) E-mail:[email protected] 2015/07/01 P8 Tel:886-6-2923150 Page 1 of 4 Min. Typ. Max. Unit 85 --- 264 VAC 47 --- 63 Hz 120 --- 370 VDC --- --- 300 mW 115VAC --- --- 20 A 230VAC --- --- 40 A AAF-05 SERIES AC/DC POWER MODULE 5W Output Specifications Parameter Output Voltage Accuracy Line Regulation Load Regulation Conditions Min. Typ. ----Vin=Min. to Max. @Full Load ----Io=0% to 100% ----3.3V & 5VDC Output Models ----0-20 MHz Bandwidth Other Output Models ----No minimum Load Requirement Zener Diode Clamp --125 --------Foldback, auto-recovery 135 150 (long term overload condition may cause damage) Hiccup mode, indefinite (Automatic Recovery) Ripple & Noise Minimum Load Over Voltage Protection Temperature Coefficient Overshoot Current Limitation Short Circuit Protection Max. ±2.0 ±1.0 ±1.0 60 1 Unit %Vom. % % mVPP of Vo %VPP of Vo 190 ±0.05 5 % of Vo %/℃ %Vout --- %Inom. Max. ----------- Unit VAC MΩ KHz ms ms Hours General Specifications Parameter I/O Isolation Voltage I/O Isolation Resistance Switching Frequency Conditions 60 Seconds 500 VDC Min. 3000 100 ------- 115VAC, Full Load 230VAC, Full Load MIL-HDBK-217F@25℃, Ground Benign Hold-up Time MTBF (calculated) Protection Class II Typ. ----65 8 40 TBD According IEC/EN 60536 UL/cUL 60950-1 recognition(UL certificate) IEC/EN 60950-1(CB-report) IEC/EN 60335-1 recognition(TUV certificata,CB-report) Safety Approvals (Pending) EMC Specifications Parameter Standards & Level Conduction Radiation EN55014-2 ,EN55024 ESD Radiated immunity Fast transient Surge Conducted immunity PFMF Dips Interruptions EMI EMS Performance EN55011, EN55014-1, EN55022, FCC part 15 Class B EN61000-4-2 Air ± 8kV, Contact ± 4kV EN61000-4-3 10V/m EN61000-4-4 ±2kV EN61000-4-5 ±1kV EN61000-4-6 10Vrms EN61000-4-8 30A/m EN61000-4-11 30% 10ms EN61000-4-11 >95% 5000ms A A A A A A A B Environmental Specifications Parameter Temperature Range (operational) Power Derating Storage Temperature Range Humidity (non condensing) Cooling Lead Temperature (1.5mm from case for 10Sec.) Conditions Ambient Min. -25℃ +50℃ to +70℃ -40℃ --- Max. +70℃ 0.125 W/℃ +85℃ 95 % rel. H Natural Convection --- 260℃ Notes 1 2 3 4 5 6 7 Peak load lasting <30s with a maximum duty cycle of 10%, average output power not to exceed maximum power. All specifications typical at Ta=+25℃, resistive load, 115VAC, 60Hz input voltage and after warm-up time rated output current unless otherwise noted. Ripple & Noise of PCB mounting type measured with a 1μF/50V MLCC. We recommend to protect the converter by a slow blow fuse in the input supply line. Other input and output voltage may be available, please contact factory. That “natural convection” is about 20LFM but is not equal to still air (0 LFM). Specifications are subject to change without notice. E-mail:[email protected] 2015/07/01 P8 Tel:886-6-2923150 Page 2 of 4 AAF-05 SERIES AC/DC POWER MODULE 5W Package Specifications PCB Mounting Mechanical Dimensions Pin Connections 25.4 [1.00] 20.32 [0.80] 2.54 [0.10] 10.16 [0.40] 2 0.60 [ 0.02] Function 1 AC (N) 2 AC (L) 3 NC 4 -Vout 5 +Vout NC: No Connection 5 ►All dimensions in mm 2.54 [0.10] 5.08 [0.20] 4 25.4 [1.00] 25.4 [1.00] 10.16 [0.40] 3 1 16 .3 [0.64] 5.08 [0.20] Pin ►Tolerance: ±0.5 ►Pin (inches) (±0.01) diameter 0.6 ±0.1 (0.02±0.004) Physical Characteristics Case Size : 25.4x25.4x16.3mm (1.0x1.0x0.64 inches) Case Material : Plastic resin (flammability to UL 94V-0 rated) Pin Material : Tinned Copper Weight : 19.7g Package Specifications Chassis Mounting (order code suffix C) Mechanical Dimensions Connections 4 2 Top view 5 1 26.0[1.02] 3 20.0[0.79] 4X 2.3 Pin Function 1 AC (N) 2 AC (L) 3 NC 4 -Vout 5 +Vout 34.0[1.34] 42.0[1.65] 3.0[0.12] Physical Characteristics Case Size : 42.0x26.0x19.3mm (1.65x1.02x0.76 inches) Case Material : Plastic resin (flammability to UL 94V-0 rated) Weight : 23.9g E-mail:[email protected] 2015/07/01 P8 Tel:886-6-2923150 Page 3 of 4 19.3[0.76] 8.0 [0.31] 11.8[0.46] 26.0[1.02] ►All dimensions in mm ►Tolerance: ±0.5 (inches) (±0.02) AAF-05 SERIES AC/DC POWER MODULE 5W Order Code Table PCB Mounting Chassis Mounting AAF-05S03 AAF-05S03C AAF-05S05 AAF-05S05C AAF-05S09 AAF-05S09C AAF-05S12 AAF-05S12C AAF-05S15 AAF-05S15C AAF-05S24 AAF-05S24C AAF-05S48 AAF-05S48C Minmax Technology Co., Ltd. 18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: [email protected] 2015/07/01 P8 Page 4 of 4