surface mount aluminum electrolytic capacitors

2015-3장 2015.1.20 03:36 PM 페이지77 태산아이인쇄그룹(국) 2261-2488 2400DPI 175LPI
SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS
CF
Chip type, High Temperature, Long Life,
Series
Long Life
Solvent Proof
・Chip type, high temperature range, for 130°
C use
・For ECU
・Application to automatic insertion machine using carrier
・Complied to the RoHS directive
Item
Characteristics
Operating temperature range
Leakage current
Capacitance tolerance
-40 ~ +130°
C
I = 0.03CV or 4μ
A whichever is greater (after 2 minutes)
±20% at 120Hz, 20°
C
Rated Voltage(V)
tanδ
Dissipation factor max.
(at 120Hz, 20°
C)
WV
Z-25°
C/Z+20°
C
Z-40°
C/Z+20°
C
Low temperature characteristics
(Impedance ratio at 120Hz)
10
0.32
10
8
12
16
6
11
25
0.21
35
0.18
25
4
8
50
0.18
35
4
6
50
4
6
Less than specified value
Within ±30% of initial value
Less than 300% of the specified value
Leakage current
Capacitance change
tanδ
Load life
(after application of the rated
voltage for 5000 hours at 130°
C)
16
0.24
ØD
Life time
Ø8×6.2mmL
2000 hours
Ø8×10mmL
3000 hours
ØD ≧ 10
5000 hours
After 1000 hours no load test, leakage current, capacitance and tanδare same as load life value.
The measurement shall be performed at 20°
C by the KS C IEC 60384 - 4
Shelf life (at 130°
C)
CHIP TYPES
The following specifications shall be satisfied when the capacitors are restored to 20°
C
after exposing them at 250°
C for 10 seconds.
Less than specified value
Within ±10% of initial value
Less than specified value
Leakage current
Capacitance change
tanδ
Resistance to soldering heat
Unit : mm
● DRAWING (See page 59)
-Series code of CF is “H”
● DIMENSIONS & MAXIMUM PERMISSIBLE RIPPLE CURRENT
WV
μF
22
33
47
68
100
220
330
470
1000
10
8×6.2
8×10
10×10
10×10
12.5×13.5
16
48
90
125
150
405
8×6.2
8×10
10×10
10×10
12.5×13.5
25
50
66
163
200
304
8×6.2
10×10
10×10
12.5×13.5
35
8×6.2
10×10
10×10
10×10
12.5×13.5
45
163
200
304
41
90
105
132
249
50
8×6.2
8×10
10×10
12.5×13.5
12.5×13.5
28
75
90
132
167
Ripple current (mA rms) at 130°
C, 120Hz
Case size ØD×L(mm)
● FREQUENCY COEFFICIENT OF PERMISSIBLE RIPPLE CURRENT
Frequency
50Hz
120Hz
300Hz
1kHz
10kHz≦
Coefficient
0.70
1.00
1.17
1.36
1.50
77