FM220A THRU FM2100A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE RANG 20 to 100 Volts CURRENT 2.0 Ampere FEATURES * * * * * * Low swiching noise Low forward voltage drop High current capability High speed switching High surge capabitity High reliability DO-214AC 0.067 (1.70) 0.051 (1.29) MECHANICAL DATA 0.110 (2.79) 0.086 (2.18) * Case: Molded plastic * Epoxy:Device has UL flammability classification 94V-O * Lead: MIL-STD-202E method 208C guaranteed * Mounting position:Any * Weight: 0.09gram 0.180(4.57) 0.160(4.06) 0.012 (0.305) 0.006 (0.152) 0.091 (2.31) 0.067 (1.70) 0.059 (1.50) 0.035 (0.89) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. 0.008 (0.203) 0.004 (0.102) 0.209 (5.31) 0.185 (4.70) Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) RATINGS SYMBOL FM220A FM230A FM240A FM250A FM260A FM280A FM290A FM2100A UNITS Maximum Recurrent Peak Reverse Voltage VRRM 20 30 40 50 60 80 90 100 Maximum RMS Voltage VRMS 14 21 28 35 42 56 63 70 Volts Maximum DC Blocking Voltage VDC 20 30 40 50 60 80 90 100 Volts Volts Maximum Average Forward Rectified Current @ T T=120oC IO 2.0 Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) I FSM 60 Amps RθJA 40 0 CJ 130 TJ -55 to + 125 0 C T STG -55 to + 150 0 C Thermal Resistance Junction to Ambient Total Capacitance Operating Temperature Range Storage Temperature Range ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Instantaneous Forward Voltage at 2.0A DC Maximum Average Reverse Current @T A = 25o C at Rated DC Blocking Voltage @T A = 100 oC NOTES : 1. Measured at 1 MHz and applied reverse voltage of 10 volts. 2. “Fully ROHS compliant”, “100% Sn plating (Pb-free)”. VF IR Amps pF FM220A FM230A FM240A FM250A FM260A FM280A FM290A FM2100A 0.55 0.70 C/W 0.85 UNITS Volts 0.2 mAmps 2.0 mAmps 2006-11 AVERAGE FORWARD CURRENT, (A) 2.0 1.5 FM 0.5 0 A 40A M2 100 M2 A-F A-F 220 250 FM 1.0 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375" (9.5mm) Lead Length 0 25 50 75 100 125 150 175 INSTANTANEOUS FORWARD CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( FM220A THRU FM2100A ) 20 10 TA = 25 OC Pulse Width = 300µS 1% Duty Cycle FM220A FM230A FM240A FM250A FM260A FM280A FM290A FM2100A 1.0 0.1 0.1 0.3 O LEAD TEMPERATURE, ( C) 100 TJ = 125 OC 1.0 0.1 TJ = 75 OC 0.01 TJ = 25 OC 0.001 0 20 40 60 FM220A~FM240A 80 100 120 140 200 100 80 60 40 20 1.0 4 10 1.3 1.5 1.7 1.9 2.1 FM250A~FM260A FM280A~FM2100A 10 1.0 TJ = 150 OC 0.1 TJ = 125 OC 0.01 T = 75 OC J 0.001 TJ = 25 OC 0 40 20 40 60 80 100 120 140 FIG.4 TYPICAL REVERSE CHARACTERISTICS PEAK FORWARD SURGE CURRENT, (A) CT, JUNCTION CAPACITANCE, (pF) TJ = 25 OC 0.4 1.1 PERCENT RATED PEAK REVERSE VOLTAGE, (%) 400 0.1 0.9 100 PERCENT RATED PEAK REVERSE VOLTAGE, (%) FIG.3 TYPICAL REVERSE CHARACTERISTICS 10 0.7 FIG.2 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (mA) INSTANTANEOUS REVERSE CURRENT, (mA) FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE 10 0.5 INSTANTANEOUS FORWARD VOLTAGE, (V) 80 REVERSE VOLTAGE, (V) FIG.5 TYPICAL JUNCTION CAPACITANCE 60 8.3mS Single Half Sine-Wave JEDEC Method 50 40 30 20 10 0 1 2 4 6 8 10 20 40 80 100 NUMBER OF CYCLES AT 60Hz FIG.6 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.