AXIAL-LEAD TAPING SPECIFICATIONS FOR DEVICES-DO-41G/DO-35 Fig.: Configuration of AXIAL-LEAD TAPING ITEM Component Pitch Untaped Lead Glass Offset Bent SYMBOL C L1-L2 F D SPECIFICATIONS (mm) 5.08 0.4 0.69 SPECIFICATIONS (inch) 0.200 0.016 0.027 0.69 1.2 Max. 0.027 0.047 Max. Tape Mismatch Taped Lead E G 0.55 Max. 3.2 Min. 0.022 Max. Lead Beyond Tape H 0 0 Reel outside diameter D1 D2 356 14.018 Feed hole diameter 30 1.181 Reel inner diameter D3 84 3.308 Tape Spacing Tape width B W1 52 0.69 77.5 2.048 0.027 0.126 Min. 3.052 Notes: 1.Axial lead devices are packed in accordance with EIA standard RS-296-D and specifications given below. 2.Suffix "TB" after P/N for 52mm packing code. Visit http:// www.rectron.com for complete datasheets E16