SBB5089Z SBB5089Z 50MHz to 6000MHz, CASCADABLE ACTIVE BIAS InGaP HBT MMIC AMPLIFIER Package: SOT-89 Product Description Features RFMD’s SBB5089Z is a high performance InGaP HBT MMIC amplifier utilizing a Darlington configuration with an active bias network. The active bias network provides stable current over temperature and process Beta variations. Designed to run directly from a 5V supply, the SBB5089Z does not require a dropping resistor as compared to typical Darlington amplifiers. The SBB5089Z product is designed for high linearity 5V gain block applications that require small size and minimal external components. It is internally matched to 50. Gain and Return Loss versus Frequency (with BiasTees) Optimum Technology Matching® Applied 30.0 InGaP HBT SiGe BiCMOS Si BiCMOS SiGe HBT GaAs pHEMT Gain and Return Loss (dB) 0.0 -20.0 -40.0 25C 25C 25C 0.0 GaN HEMT 1.0 Single Fixed 5V Supply Robust 1000V ESD, Class 1C Patented Thermal Design and Bias Circuit Low Thermal Resistance 2.0 3.0 4.0 5.0 PA Driver Amplifier Cellular, PCS, GSM, UMTS Wideband Intrumentation Wireless Data, Satellite Terminals 6.0 Frequency (GHz) RF MEMS Parameter Small Signal Gain -10.0 Si BJT 10.0 -30.0 Wideband Flat Gain to 4GHz: ±1.1dB P1dB =20.4dBm at 1950MHz Applications 20.0 Si CMOS GaAs HBT GaAs MESFET Min. Specification Typ. Max. Unit Condition 19.0 18.3 14.5 20.5 22.0 dB 850MHz 19.0 21.5 dB 1950MHz 15.5 17.5 dB 6000MHz Output Power at 1dB Compression 20.5 dBm 850MHz 19.0 20.0 dBm 1950MHz Third Order Intercept Point 38.5 dBm 850MHz 33.0 35.0 dBm 1950MHz Bandwidth 3000 MHz Min. 10dB return loss (typ.) Input Return Loss 10.0 13.0 dB 1950MHz Output Return Loss 10.0 14.0 dB 1950MHz Reverse Isolation 23.3 dB 1950MHz Noise Figure 3.9 4.9 dB 1950MHz Device Operating Voltage 4.75 5.0 5.25 V Device Operating Current 60.0 75.0 92.0 mA Thermal Resistance 69.9 °C/W junction - lead Test Conditions: VD =5V, ID =75mA Typ., OIP3 Tone Spacing=1MHz, POUT per tone=-dBm, TL =25°C, ZS =ZL =50Tested with Bias Tees RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks and registered trademarks are the property of their respective owners. ©2006, RF Micro Devices, Inc. DS150622 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 1 of 10 SBB5089Z Absolute Maximum Ratings Rating Unit Device Current (ID) Parameter 100 mA Max Device Voltage (VD) 5.5 V Max RF Input Power 24 dBm Max Operating Dissipated Power 0.55 W Junction Temp (TJ) +150 °C Operating Temp Range (TL) -40 to +105 °C Storage Temp Range -40 to +150 °C ESD Rating - Human Body Model (HBM) Moisture Sensitivity Level Caution! ESD sensitive device. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. RoHS status based on EUDirective2002/95/EC (at time of this document revision). The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. Class 1C MSL2 Operation of this device beyond any one of these limits may cause permanent damage. For reliable continuous operation, the device voltage and current must not exceed the maximum operating values specified in the table on page one. Bias Conditions should also satisfy the following expression: IDVD <(TJ -TL)/RTH, j-l and TL =TLEAD Typical Performance at Key Operating Frequencies (0.5GHz to 3.5GHz Application Circuit) Specification Parameter Unit Min. Typ. Max. Small Signal Gain Output Third Order Intercept Point Output Power at 1dB Compression 2 of 10 21.1 20.9 20.8 20.8 20.8 20.1 19.8 18.7 17.8 36 37.8 37.5 38.6 39.2 34.9 32.8 29.4 26.8 19.4 19.7 20 20.5 20.4 20.4 19.4 16.9 14.7 dB dB dB dB dB dB dB dB dB dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm Condition 50MHz 100MHz 200MHz 500MHz 850MHz 1950MHz 2500MHz 3500MHz 4000MHz 50MHz 100MHz 200MHz 500MHz 850MHz 1950MHz 2500MHz 3500MHz 4000MHz 50MHz 100MHz 200MHz 500MHz 850MHz 1950MHz 2500MHz 3500MHz 4000MHz 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. DS150622 SBB5089Z Parameter Min. Specification Typ. Max. Unit Condition Input Return Loss 11.3 dB 50MHz 17.4 dB 100MHz 24.3 dB 200MHz 27.2 dB 500MHz 22.7 dB 850MHz 14.6 dB 1950MHz 12.9 dB 2500MHz 10.6 dB 3500MHz 11.6 dB 4000MHz Output Return Loss 15.9 dB 50MHz 21.7 dB 100MHz 30.4 dB 200MHz 31.8 dB 500MHz 21.5 dB 850MHz 13.5 dB 1950MHz 12.0 dB 2500MHz 13.5 dB 3500MHz 27.5 dB 4000MHz Reverse Isolation 17.4 dB 50MHz 17.5 dB 100MHz 17.5 dB 200MHz 22.7 dB 500MHz 22.8 dB 850MHz 23.4 dB 1950MHz 23.7 dB 2500MHz 24.7 dB 3500MHz 25.7 dB 4000MHz Noise Figure 4.4 dB 50MHz 4.4 dB 100MHz 4.3 dB 200MHz 3.8 dB 500MHz 3.8 dB 850MHz 4.1 dB 1950MHz 4.1 dB 2500MHz 4.3 dB 3500MHz 4.6 dB 4000MHz Test Conditions: VCC =5V, ID =75mA Typ., OIP3 Tone Spacing=1MHz, POUT per tone=0dBm, TL =25°C, ZS =ZL =50 DS150622 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 3 of 10 SBB5089Z 500MHz to 3.5GHz Application Circuit Noise Figure at 25°C P1dB versus Frequency With Application Circuit 25.0 8.0 20.0 6.0 P1dB (dBm) Noise Figure (dB) 7.0 5.0 4.0 3.0 2.0 10.0 BiasTee 1.0 15.0 25C -40C 85C AppCkt 0.0 5.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 0.5 4.0 1.0 1.5 Frequency (GHz) 2.0 2.5 3.0 3.5 4.0 Frequency (GHz) OIP3 versus Frequency With Application Circuit 45.0 40.0 OIP3 dBm 35.0 30.0 25.0 25C -40C 85C 20.0 15.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Frequency (GHz) 4 of 10 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. DS150622 SBB5089Z 0.5GHz to 3.5GHz Application Circuit S-Parameters Over Temperature S21 versus Frequency S11 versus Frequency 25.0 0.0 -5.0 20.0 -15.0 S21 (dB) S11 (dB) -10.0 -20.0 -25.0 -30.0 25C -40C 85C -35.0 15.0 10.0 25C -40C 85C 5.0 0.0 -40.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 0.0 4.0 0.5 1.0 1.5 S12 versus Frequency 2.5 3.0 3.5 4.0 S22 versus Frequency 0.0 0.0 25C -40C 85C -5.0 -10.0 -15.0 -20.0 -25.0 25C -40C 85C -5.0 -10.0 S22 (dB) S12 (dB) 2.0 Frequency (GHz) Frequency (GHz) -15.0 -20.0 -25.0 -30.0 -30.0 -35.0 -35.0 -40.0 -40.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0.0 0.5 1.0 Frequency (GHz) 1.5 2.0 2.5 3.0 3.5 4.0 Frequency (GHz) Id vs. Temperature (App. Ckt.) 84.0 105.0 Current versus Voltage Over Temperature (Application Circuit) 82.0 Current (mA) Current (mA) 95.0 80.0 85.0 75.0 25C -40C 85C 65.0 78.0 -40.0 55.0 -20.0 0.0 20.0 40.0 Temperature DS150622 60.0 80.0 4.5 4.6 4.7 4.8 4.9 5.0 5.1 5.2 5.3 5.4 5.5 Voltage (V) 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 5 of 10 SBB5089Z S-Parameters Over Temperature (Bias Tee) S11 versus Frequency S21 versus Frequency 0.0 25.0 -5.0 20.0 -15.0 S21 (dB) S11 (dB) -10.0 -20.0 -25.0 -30.0 25C -40C 85C -35.0 15.0 10.0 25C -40C 85C 5.0 0.0 -40.0 0.0 1.0 2.0 3.0 4.0 5.0 0.0 6.0 1.0 4.0 5.0 6.0 0.0 0.0 25C -40C 85C -5.0 -10.0 -5.0 -10.0 -15.0 S22 (dB) S12 (dB) 3.0 S22 versus Frequency S12 versus Frequency -20.0 -15.0 -20.0 -25.0 -25.0 -30.0 -30.0 -35.0 -35.0 25C -40C 85C -40.0 -40.0 0.0 1.0 2.0 3.0 4.0 Frequency (GHz) 6 of 10 2.0 Frequency (GHz) Frequency (GHz) 5.0 6.0 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Frequency (GHz) 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. DS150622 SBB5089Z Device Current Over Temperature (Bias Tee) Id vs. Temperature (Bias Tees) 85.0 105.0 Current versus Voltage Over Temperature (Bias Tees) 83.0 Current (mA) Current (mA) 95.0 81.0 85.0 75.0 25C -40C 85C 65.0 79.0 -40.0 -20.0 0.0 20.0 40.0 Temperature DS150622 60.0 80.0 55.0 4.5 4.6 4.7 4.8 4.9 5.0 5.1 5.2 5.3 5.4 5.5 Voltage (V) 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 7 of 10 SBB5089Z Pin 1 2, 4 3 Function RF IN GND RF OUT/ BIAS Description RF input pin. This pin requires the use of an external DC blocking capacitor chosen for the frequency of operation. Connection to ground. Use via holes for best performance to reduce lead inductance as close to ground leads as possible RF output and bias pin. DC voltage is present on this pin, therefore a DC blocking capacitor is necessary for proper operation. Suggested PCB Pad Layout Nominal Package Dimensions Dimensions in inches (millimeters) 8 of 10 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. DS150622 SBB5089Z Application Schematic SBB5089Z Reference Designator Frequency (MHz) 500 to 3500 CB 68pF LC 82nH 0805CS Note: For frequencies under 500MHz, make the following changes: CB=.1uF LC=330nH Evaluation Board Layout DS150622 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 9 of 10 SBB5089Z Package Marking Ordering Information Ordering Code 10 of 10 Description SBB5089Z 7” Reel with 1000 pieces SBB5089ZSQ Sample Bag with 25 pieces SBB5089ZSR 7” Reel with 100 pieces SBB5089ZPCK1 500MHz to 3500MHz PCBA with 5-piece sample bag 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. DS150622