4N22U - OPTEK Technology

Surface Mount Optically Coupled Isolator
4N22U, 4N23U, 4N24U (COTS, TX, TXV)
4N47U, 4N48U, 4N49U (COTS, TX, TXV)
Features:
•
•
•
•
Surface Mount (SM), Leadless Chip Carrier (LCC)
1 kV electrical isolation
Base contact provided for conventional transistor biasing
TX and TXV devices processed to MIL-PRF-19500
Description:
Each isolator in this series consists of an infrared emitting diode and a NPN silicon phototransistor, which are
mounted in a hermetically sealed Surface Mount, 6 Pin package. Devices are designed for military and/or harsh
environments.
The 4N22U, 4N23U and 4N24U (TX, TXV) devices are processed to MIL-PRF-19500/486. The 4N47U, 4N48U
and 4N48U (TX, TXV) devices are processed to MIL-PRF-19500/548.
Please contact your local representative or OPTEK for more information.
Ordering Information
Applications:
•
•
•
•
•
•
•
Military equipment
Part
Number
Isolation
Voltage (kV)
IF (mA)
Typ / Max
High-Reliability environments
High voltage isolation between
input and output
Electrical isolation in dirty
environments
Industrial equipment
Medical equipment
Office equipment
VCE
(Volts)
Max
Processing
MIL-PRF195000
COTS
4N22U
4N22UTX
486
4N22UTXV
COTS
4N23U
35
4N23UTX
486
4N23UTXV
COTS
4N24U
4N24UTX
4N24UTXV
486
1
10 / 40
COTS
4N47U
4N47UTX
548
4N47UTXV
COTS
4N48U
4N48UTX
45
548
4N48UTXV
4N49U
4N49UTX
COTS
548
4N49UTXV
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue B 08/2010
Page 1 of 5
Surface Mount Optically Coupled Isolator
4N22U, 4N23U, 4N24U (COTS, TX, TXV)
4N47U, 4N48U, 4N49U (COTS, TX, TXV)
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Storage Temperature
-65° C to +150° C
Operating Temperature
-55° C to +125° C
(1)(2)
Input-to-Output Isolation Voltage
± 1 kVDC
(3)
Lead Soldering Temperature (1/16” (1.6 mm) from case for 5 seconds with soldering iron)
260° C
Input Diode
Forward DC Current(4)
50 mA
Reverse DC Voltage
Power Dissipation
2V
(5)
300 mW
Output Photosensor
Collector-Emitter Voltage
35 V
Emitter-Collector Voltage
7.0 V
Power Dissipation
(6)
100 mW
Collector Current vs Forward Current vs Temperature
Forward Voltage vs Forward Current vs Temperature
1.5
1.6
1.4
1.4
Normalized - IC(ON) - Collector Current (mA)
VF - Forward Voltage (V)
Normalized at +25°C and IF = 20
1.3
1.2
-55°
-35°
1.1
-15°
+5°
1.0
+25°
+45°
+65°
0.9
+85°
1.2
1.0
0.8
0.6
-55°
-35°
-15°
+5°
+25°
+45°
+65°
+85°
+105°
+125°
0.4
0.2
+105°
+125°
0.8
0
5
10
15
IF - Forward Current (mA)
20
25
0.0
0
5
10
15
20
IF - Forward current (mA)
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue B
08/2010
Page 2 of 5
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
25
Surface Mount Optically Coupled Isolator
4N22U, 4N23U, 4N24U (COTS, TX, TXV)
4N47U, 4N48U, 4N49U (COTS, TX, TXV)
Electrical Characteristics (TA = 25o C unless otherwise noted)
SYMBOL
PARAMETER
MIN
TYP
MAX
UNITS
TEST CONDITIONS
Input Diode (See OP165 or OP265 for additional information - for reference only)
VF
Forward Voltage
4N22, 4N23, 4N24 [A] (COTS, TX, TXV)
4N22, 4N23, 4N24 [A] (COTS, TX, TXV)
4N22, 4N23, 4N24 [A] (COTS, TX, TXV)
4N47, 4N48, 4N49 [A] (COTS, TX, TXV)
4N47, 4N48, 4N49 [A] (COTS, TX, TXV)
4N47, 4N48, 4N49 [A] (COTS, TX, TXV)
IR
Reverse Current
0.80
1.00
0.70
0.80
1.00
0.70
-
1.30
1.50
1.20
1.50
1.70
1.30
-
-
100
IF = 10.0 mA
IF = 10.0 mA, TA = -55° C(1)
IF = 10.0 mA, TA = -100° C(1)
IF = 10.0 mA
IF = 10.0 mA, TA = -55° C(1)
IF = 10.0 mA, TA = -100° C(1)
V
µA
VR = 2.0 V
Output Photosensor (See OP505 for additional information - for reference only)
V(BR)CEO
Collector-Emitter Breakdown Voltage
4N22U Series
4N47U Series
35
40
80
90
-
V
IC = 100 µA, IF = 0
V(BR)ECO
Emitter-Collector Breakdown Voltage
4N22U Series
4N47U Series
4
7
6
10
-
V
IE = 100 µA, IF = 0
Collector-Emitter Dark Current
-
20
-
100
100
nA
µA
VCE = 20 V, IF = 0 IB= 0 TA = 25°C
VCE = 20 V, IF = 0 IB= 0 TA = 100°C
Collector Saturation Voltage
-
0.2
0.3
V
IF = 20 mA, IC = 2 mA
ICEO
VCE(SAT)
Notes:
(1)
(2)
(3)
(4)
(5)
(6)
Measured with input and output leads shorted. Typical input/output capacitance is 0.06 pF.
UL recognition is for 3500 VAC for one minute.
RMA flux is recommended. The duration can be extended to 10 seconds maximum when flow soldering.
Derate linearly 0.67 mA/°C above 25°C.
Derate linearly 0.83 mA/°C above 25°C.
Derate linearly 1.67 mA/°C above 25°C.
0.245 [6.22]
0.090 [2.29]
0.073 [1.85]
0.025 [0.64]
2
1
6
3
4
5
0.170 [4.32]
0.050 [1.27]
Pin 1 Identifier
0.065 [1.65]
DIMENSIONS ARE IN:
1
3
4
6
[MILLIMETERS]
INCHES
5
Pin #
LED
Pin #
Transistor
2
1
N/A
Anode
3
4
Collector
Base
6
Cathode
5
Emitter
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue B 08/2010
Page 3 of 5
Surface Mount Optically Coupled Isolator
4N22U, 4N23U, 4N24U (COTS, TX, TXV)
4N47U, 4N48U, 4N49U (COTS, TX, TXV)
Coupled
IC/IF
IC(ON)
VCE(SAT)
hFE
tr & tf
DC Current Transfer
Ratio
On-State
Collector Current
Collector
Saturation
Voltage
DC Current Gain
Rise and Fall Time
4N22U
4N23U
4N24U
25
60
100
-
-
%
IF = 10 mA, VCE = 5 V
4N47U
4N48U
4N49U
50
100
200
-
-
%
IF = 2 mA, VCE = 5 V
4N22U
0.15
2.50
1.00
1.00
-
-
4N23U
0.2
6.0
2.5
2.5
-
4N24U
0.4
10.0
4.0
4.0
4N47U
mA
VCE = 10 V, IB = 0, IF = 2.0 mA TA = 25°C
VCE = 10 V, IB = 0, IF = 10.0 mA TA = 25°C
VCE = 10 V, IB = 0, IF = 10.0 mA TA = -55°C
VCE = 10 V, IB = 0, IF = 10.0 mA TA = 100°C
-
mA
VCE = 10 V, IB = 0, IF = 2.0 mA TA = 25°C
VCE = 10 V, IB = 0, IF = 10.0 mA TA = 25°C
VCE = 10 V, IB = 0, IF = 10.0 mA TA = -55°C
VCE = 10 V, IB = 0, IF = 10.0 mA TA = 100°C
-
-
mA
VCE = 10 V, IB = 0, IF = 2.0 mA TA = 25°C
VCE = 10 V, IB = 0, IF = 10.0 mA TA = 25°C
VCE = 10 V, IB = 0, IF = 10.0 mA TA = -55°C
VCE = 10 V, IB = 0, IF = 10.0 mA TA = 100°C
0.5
0.7
0.5
-
-
mA
VCE = 5 V, IB = 0, IF = 1.0 mA TA = 25°C
VCE = 5 V, IB = 0, IF = 2.0 mA TA = -55°C
VCE = 5 V, IB = 0, IF = 2.0 mA TA = 100°C
4N48U
1.0
1.4
1.0
-
5.0
-
mA
VCE = 5 V, IB = 0, IF = 1.0 mA TA = 25°C
VCE = 5 V, IB = 0, IF = 2.0 mA TA = -55°C
VCE = 5 V, IB = 0, IF = 2.0 mA TA = 100°C
4N49U
2.0
2.8
2.0
-
10.0
-
mA
VCE = 5 V, IB = 0, IF = 1.0 mA TA = 25°C
VCE = 5 V, IB = 0, IF = 2.0 mA TA = -55°C
VCE = 5 V, IB = 0, IF = 2.0 mA TA = 100°C
4N22U
4N23U
4N24U
-
-
0.3
0.3
0.3
V
IC = 2.5 mA, IB = 0, IF = 20 mA
IC = 5.0 mA, IB = 0, IF = 20 mA
IC = 10.0 mA, IB = 0, IF = 20 mA
4N47U
4N48U
4N49U
-
-
0.3
0.3
0.3
V
IC = 0.5 mA, IB = 0, IF = 2.0 mA
IC = 1.0 mA, IB = 0, IF = 2.0 mA
IC = 2.0 mA, IB = 0, IF = 2.0 mA
4N22U
4N23U
4N24U
200
300
400
-
-
4N47U
4N48U
4N49U
100
100
100
-
-
-
VCE = 5 V, IC = 10 mA, IF = 0 mA
4N22U
4N23U
4N24U
-
-
15
15
20
µs
VCC = 10 V, IF = 10 mA, RL = 100Ω,
Pulse width = 100 ms, Duty cycle = 1%
4N47U
4N48U
4N49U
-
-
20
20
20
µs
VCC = 10 V, IF = 5 mA, RL = 100Ω,
Pulse width = 100 ms, Duty cycle = 1%
1011
-
-
Ω
VIO = ±1,000 Vdc
-
-
5.0
pF
VIO = 0 Vdc, f = 1.0 MHz
RIO
Resistance (Input to Output)
CIO
Capacitance (Input to Output)
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue B
08/2010
Page 4 of 5
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Surface Mount Optically Coupled Isolator
4N22U, 4N23U, 4N24U (COTS, TX, TXV)
4N47U, 4N48U, 4N49U (COTS, TX, TXV)
Electrical Characteristics (TA = 25°C unless otherwise noted)
SYMBO
L
PARAMETER
MIN
TYP
MAX UNITS
TEST CONDITIONS
On-State Collector Current
4N22, 4N22A (COTS, TX, TXV)
4N22, 4N22A (COTS, TX, TXV)
4N22, 4N22A (COTS, TX, TXV)
4N22, 4N22A (COTS, TX, TXV)
0.15
2.50
1.00
1.00
-
-
IF = 2.0 mA , VCE = 5 V, IB = 0
IF = 10.0 mA , VCE = 5 V, IB = 0
(1)
IF = 10.0 mA , VCE = 5 V, IB = 0, TA = -55° C
(1)
IF = 10.0 mA , VCE = 5 V, IB = 0, TA = 100° C
4N23, 4N23A (COTS, TX, TXV)
4N23, 4N23A (COTS, TX, TXV)
4N23, 4N23A (COTS, TX, TXV)
4N23, 4N23A (COTS, TX, TXV)
0.20
6.00
2.50
2.50
-
-
IF = 2.0 mA , VCE = 5 V, IB = 0
IF = 10.0 mA , VCE = 5 V, IB = 0
(1)
IF = 10.0 mA , VCE = 5 V, IB = 0, TA = -55° C
(1)
IF = 10.0 mA , VCE = 5 V, IB = 0, TA = 100° C
4N24, 4N24A (COTS, TX, TXV)
4N24, 4N24A (COTS, TX, TXV)
4N24, 4N24A (COTS, TX, TXV)
4N24, 4N24A (COTS, TX, TXV)
0.40
10.0
4.00
4.00
-
-
IF = 2.0 mA , VCE = 5 V, IB = 0
IF = 10.0 mA , VCE = 5 V, IB = 0
(1)
IF = 10.0 mA , VCE = 5 V, IB = 0, TA = -55° C
(1)
IF = 10.0 mA , VCE = 5 V, IB = 0, TA = 100° C
4N47, 4N47A (COTS, TX, TXV)
4N47, 4N47A (COTS, TX, TXV)
4N47, 4N47A (COTS, TX, TXV)
0.50
0.70
0.50
-
-
IF = 1.0 Ma, VCE = 5.0 V, IB = 0
(1)
IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = -55° C
(1)
IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = 100° C
4N48, 4N48A (COTS, TX, TXV)
4N48, 4N48A (COTS, TX, TXV)
4N48, 4N48A (COTS, TX, TXV)
1.00
1.40
1.00
-
5
-
IF = 1.0 mA, VCE = 5.0 V, IB = 0
(1)
IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = -55° C
(1)
IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = 100° C
4N49, 4N49A (COTS, TX, TXV)
4N49, 4N49A (COTS, TX, TXV)
4N49, 4N49A (COTS, TX, TXV)
2.00
2.80
2.00
-
10
-
IF = 1.0 mA, VCE = 5.0 V, IB = 0
(1)
IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = -55° C
(1)
IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = 100° C
Coupled
IC(ON)
mA
ICB(ON)
On-State Collector Base
4N47, 4N48, 4N49 [A] (COTS, TX, TXV)
30
-
-
VCE(SAT)
Collector-Emitter Saturation Voltage
4N22, 4N23, 4N24 [A] (COTS, TX, TXV)
4N22, 4N23, 4N24 [A] (COTS, TX, TXV)
4N22, 4N23, 4N24 [A] (COTS, TX, TXV)
4N47, 4N47A (COTS, TX, TXV)
4N48, 4N48A (COTS, TX, TXV)
4N49, 4N49A (COTS, TX, TXV)
-
-
0.30
0.30
0.30
0.30
0.30
0.30
HFE
DC Current Gain
4N22, 4N22A (COTS, TX, TXV)
4N23, 4N23A (COTS, TX, TXV)
4N24, 4N24A (COTS, TX, TXV)
4N47, 4N48, 4N49 [A] (COTS, TX, TXV)
200
300
400
100
-
-
RIO
Resistance (Input-to-Output)
4N22, 4N23, 4N24 [A] (COTS, TX, TXV)
4N47, 4N48, 4N49 [A] (COTS, TX, TXV)
1011
1011
-
-
Ω
V10 = ± 1.0 VDC(3)
VI-O = ± 1000 VDC(3)
CIO
Capacitance (Input-to-Output)
-
-
5
pF
VI-O = 0 V, f = 1.0 MHz(3)
µA
V
V
VCB = 5 V, IE = 0, IF = 10 mA
IF = 20 mA , IC = 2.5 mA, IB = 0
IF = 20 mA , IC = 5.0 mA, IB = 0
IF = 20 mA , IC = 10.0 mA, IB = 0
IF = 2.0 mA, IC = 0.5 mA, IB = 0
IF = 2.0 mA, IC = 1.0 mA, IB = 0
IF = 2.0 mA, IC = 2.0 mA, IB = 0
VCE = 5.0 V , IC = 10.0 mA, IF = 0 mA
VCE = 5.0 V , IC = 10.0 mA, IF = 0 mA
VCE = 5.0 V , IC = 10.0 mA, IF = 0 mA
VCE = 5.0 V , IC = 10.0 mA, IF = 0 mA
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue B 08/2010
Page 5 of 5