Surface Mount Optically Coupled Isolator 4N22U, 4N23U, 4N24U (COTS, TX, TXV) 4N47U, 4N48U, 4N49U (COTS, TX, TXV) Features: • • • • Surface Mount (SM), Leadless Chip Carrier (LCC) 1 kV electrical isolation Base contact provided for conventional transistor biasing TX and TXV devices processed to MIL-PRF-19500 Description: Each isolator in this series has a 890 nm (for the 4N2_U series) and 935nm (for the 4N4_ series) wavelength infrared emitting diode and a NPN silicon phototransistor, which are mounted in a hermetically sealed Surface Mount, 6 Pin package. Devices are designed for military and/or harsh environments. Burn-in condition is VCE = 10V, IF = 40mA, PD = 275 mW, TA = 25° C. The 4N22U, 4N23U and 4N24U (TX, TXV) devices are processed to MIL-PRF-19500/486. The 4N47U, 4N48U and 4N48U (TX, TXV) devices are processed to MIL-PRF-19500/548. Please contact your local representative or OPTEK for more information. Ordering Information Applications: • • • • • • • Military equipment Part Number LED Peak Wavelength Sensor Isolation Voltage (kV) CTR % Minimum IF (mA) Typ / Max High-Reliability environments High voltage isolation between input and output Electrical isolation in dirty environments Industrial equipment Medical equipment Office equipment VCE (Volts) Max Processing MIL-PRF195000 COTS 4N22U 25 4N22UTX 486 4N22UTXV COTS 4N23U 4N23UTX 60 890 nm 35 486 4N23UTXV COTS 4N24U 100 4N24UTX 4N24UTXV Transistor 1 486 10 / 40 COTS 4N47U 50 4N47UTX 548 4N47UTXV COTS 4N48U 4N48UTX 935 nm 100 45 548 4N48UTXV COTS 4N49U 4N49UTX 200 548 4N49UTXV RoHS OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A .1 03/09 Page 1 of 5 Surface Mount Optically Coupled Isolator 4N22U, 4N23U, 4N24U (COTS, TX, TXV) 4N47U, 4N48U, 4N49U (COTS, TX, TXV) Absolute Maximum Ratings (TA = 25o C unless otherwise noted) Storage Temperature -65° C to +150° C Operating Temperature -55° C to +125° C (1)(2) Input-to-Output Isolation Voltage ± 1 kVDC (3) Lead Soldering Temperature (1/16” (1.6 mm) from case for 5 seconds with soldering iron) 260° C Input Diode Forward DC Current(4) 50 mA Reverse DC Voltage Power Dissipation 2V (5) 300 mW Output Photosensor Collector-Emitter Voltage 35 V Emitter-Collector Voltage 7.0 V Power Dissipation (6) 100 mW Collector Current vs Forward Current vs Temperature Forward Voltage vs Forward Current vs Temperature 1.5 1.6 1.4 1.4 Normalized - IC(ON) - Collector Current (mA) VF - Forward Voltage (V) Normalized at +25°C and IF = 20 1.3 1.2 -55° -35° 1.1 -15° +5° 1.0 +25° +45° +65° 0.9 +85° 1.2 1.0 0.8 0.6 -55° -35° -15° +5° +25° +45° +65° +85° +105° +125° 0.4 0.2 +105° +125° 0.8 0 5 10 15 IF - Forward Current (mA) 20 25 0.0 0 5 10 15 20 IF - Forward current (mA) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.1 03/09 Page 2 of 5 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com 25 Surface Mount Optically Coupled Isolator 4N22U, 4N23U, 4N24U (COTS, TX, TXV) 4N47U, 4N48U, 4N49U (COTS, TX, TXV) Electrical Characteristics (TA = 25o C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode (See OP165 or OP265 for additional information - for reference only) VF Forward Voltage 4N22, 4N23, 4N24 [A] (COTS, TX, TXV) 4N22, 4N23, 4N24 [A] (COTS, TX, TXV) 4N22, 4N23, 4N24 [A] (COTS, TX, TXV) 4N47, 4N48, 4N49 [A] (COTS, TX, TXV) 4N47, 4N48, 4N49 [A] (COTS, TX, TXV) 4N47, 4N48, 4N49 [A] (COTS, TX, TXV) IR Reverse Current 0.80 1.00 0.70 0.80 1.00 0.70 - 1.30 1.50 1.20 1.50 1.70 1.30 - - 100 IF = 10.0 mA IF = 10.0 mA, TA = -55° C(1) IF = 10.0 mA, TA = -100° C(1) IF = 10.0 mA IF = 10.0 mA, TA = -55° C(1) IF = 10.0 mA, TA = -100° C(1) V µA VR = 2.0 V Output Photosensor (See OP505 for additional information - for reference only) V(BR)CEO Collector-Emitter Breakdown Voltage 4N22U Series 4N47U Series 35 40 80 90 - V IC = 100 µA, IF = 0 V(BR)ECO Emitter-Collector Breakdown Voltage 4N22U Series 4N47U Series 4 7 6 10 - V IE = 100 µA, IF = 0 Collector-Emitter Dark Current - 20 - 100 100 nA µA VCE = 20 V, IF = 0 IB= 0 TA = 25°C VCE = 20 V, IF = 0 IB= 0 TA = 100°C Collector Saturation Voltage - 0.2 0.3 V IF = 20 mA, IC = 2 mA ICEO VCE(SAT) Notes: (1) (2) (3) (4) (5) (6) Measured with input and output leads shorted. Typical input/output capacitance is 0.06 pF. UL recognition is for 3500 VAC for one minute. RMA flux is recommended. The duration can be extended to 10 seconds maximum when flow soldering. Derate linearly 0.67 mA/°C above 25°C. Derate linearly 0.83 mA/°C above 25°C. Derate linearly 1.67 mA/°C above 25°C. 0.245 [6.22] 0.090 [2.29] 0.073 [1.85] 0.025 [0.64] 2 1 6 3 4 5 0.170 [4.32] 0.050 [1.27] Pin 1 Identifier 0.065 [1.65] DIMENSIONS ARE IN: 1 3 4 6 [MILLIMETERS] INCHES 5 Pin # LED Pin # Transistor 2 1 N/A Anode 3 4 Collector Base 6 Cathode 5 Emitter OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A .1 03/09 Page 3 of 5 Surface Mount Optically Coupled Isolator 4N22U, 4N23U, 4N24U (COTS, TX, TXV) 4N47U, 4N48U, 4N49U (COTS, TX, TXV) Coupled IC/IF IC(ON) VCE(SAT) hFE tr & tf DC Current Transfer Ratio On-State Collector Current Collector Saturation Voltage DC Current Gain Rise and Fall Time 4N22U 4N23U 4N24U 25 60 100 - - % IF = 10 mA, VCE = 5 V 4N47U 4N48U 4N49U 50 100 200 - - % IF = 2 mA, VCE = 5 V 4N22U 0.15 2.50 1.00 1.00 - - 4N23U 0.2 6.0 2.5 2.5 - 4N24U 0.4 10.0 4.0 4.0 4N47U mA VCE = 10 V, IB = 0, IF = 2.0 mA TA = 25°C VCE = 10 V, IB = 0, IF = 10.0 mA TA = 25°C VCE = 10 V, IB = 0, IF = 10.0 mA TA = -55°C VCE = 10 V, IB = 0, IF = 10.0 mA TA = 100°C - mA VCE = 10 V, IB = 0, IF = 2.0 mA TA = 25°C VCE = 10 V, IB = 0, IF = 10.0 mA TA = 25°C VCE = 10 V, IB = 0, IF = 10.0 mA TA = -55°C VCE = 10 V, IB = 0, IF = 10.0 mA TA = 100°C - - mA VCE = 10 V, IB = 0, IF = 2.0 mA TA = 25°C VCE = 10 V, IB = 0, IF = 10.0 mA TA = 25°C VCE = 10 V, IB = 0, IF = 10.0 mA TA = -55°C VCE = 10 V, IB = 0, IF = 10.0 mA TA = 100°C 0.5 0.7 0.5 - - mA VCE = 5 V, IB = 0, IF = 1.0 mA TA = 25°C VCE = 5 V, IB = 0, IF = 2.0 mA TA = -55°C VCE = 5 V, IB = 0, IF = 2.0 mA TA = 100°C 4N48U 1.0 1.4 1.0 - 5.0 - mA VCE = 5 V, IB = 0, IF = 1.0 mA TA = 25°C VCE = 5 V, IB = 0, IF = 2.0 mA TA = -55°C VCE = 5 V, IB = 0, IF = 2.0 mA TA = 100°C 4N49U 2.0 2.8 2.0 - 10.0 - mA VCE = 5 V, IB = 0, IF = 1.0 mA TA = 25°C VCE = 5 V, IB = 0, IF = 2.0 mA TA = -55°C VCE = 5 V, IB = 0, IF = 2.0 mA TA = 100°C 4N22U 4N23U 4N24U - - 0.3 0.3 0.3 V IC = 2.5 mA, IB = 0, IF = 20 mA IC = 5.0 mA, IB = 0, IF = 20 mA IC = 10.0 mA, IB = 0, IF = 20 mA 4N47U 4N48U 4N49U - - 0.3 0.3 0.3 V IC = 0.5 mA, IB = 0, IF = 2.0 mA IC = 1.0 mA, IB = 0, IF = 2.0 mA IC = 2.0 mA, IB = 0, IF = 2.0 mA 4N22U 4N23U 4N24U 200 300 400 - - 4N47U 4N48U 4N49U 100 100 100 - - - VCE = 5 V, IC = 10 mA, IF = 0 mA 4N22U 4N23U 4N24U - - 15 15 20 µs VCC = 10 V, IF = 10 mA, RL = 100Ω, Pulse width = 100 ms, Duty cycle = 1% 4N47U 4N48U 4N49U - - 20 20 20 µs VCC = 10 V, IF = 5 mA, RL = 100Ω, Pulse width = 100 ms, Duty cycle = 1% 1011 - - Ω VIO = ±1,000 Vdc - - 5.0 pF VIO = 0 Vdc, f = 1.0 MHz RIO Resistance (Input to Output) CIO Capacitance (Input to Output) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.1 03/09 Page 4 of 5 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Surface Mount Optically Coupled Isolator 4N22U, 4N23U, 4N24U (COTS, TX, TXV) 4N47U, 4N48U, 4N49U (COTS, TX, TXV) Electrical Characteristics (TA = 25°C unless otherwise noted) SYMBO L PARAMETER MIN TYP MAX UNITS TEST CONDITIONS On-State Collector Current 4N22, 4N22A (COTS, TX, TXV) 4N22, 4N22A (COTS, TX, TXV) 4N22, 4N22A (COTS, TX, TXV) 4N22, 4N22A (COTS, TX, TXV) 0.15 2.50 1.00 1.00 - - IF = 2.0 mA , VCE = 5 V, IB = 0 IF = 10.0 mA , VCE = 5 V, IB = 0 (1) IF = 10.0 mA , VCE = 5 V, IB = 0, TA = -55° C (1) IF = 10.0 mA , VCE = 5 V, IB = 0, TA = 100° C 4N23, 4N23A (COTS, TX, TXV) 4N23, 4N23A (COTS, TX, TXV) 4N23, 4N23A (COTS, TX, TXV) 4N23, 4N23A (COTS, TX, TXV) 0.20 6.00 2.50 2.50 - - IF = 2.0 mA , VCE = 5 V, IB = 0 IF = 10.0 mA , VCE = 5 V, IB = 0 (1) IF = 10.0 mA , VCE = 5 V, IB = 0, TA = -55° C (1) IF = 10.0 mA , VCE = 5 V, IB = 0, TA = 100° C 4N24, 4N24A (COTS, TX, TXV) 4N24, 4N24A (COTS, TX, TXV) 4N24, 4N24A (COTS, TX, TXV) 4N24, 4N24A (COTS, TX, TXV) 0.40 10.0 4.00 4.00 - - IF = 2.0 mA , VCE = 5 V, IB = 0 IF = 10.0 mA , VCE = 5 V, IB = 0 (1) IF = 10.0 mA , VCE = 5 V, IB = 0, TA = -55° C (1) IF = 10.0 mA , VCE = 5 V, IB = 0, TA = 100° C 4N47, 4N47A (COTS, TX, TXV) 4N47, 4N47A (COTS, TX, TXV) 4N47, 4N47A (COTS, TX, TXV) 0.50 0.70 0.50 - - IF = 1.0 Ma, VCE = 5.0 V, IB = 0 (1) IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = -55° C (1) IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = 100° C 4N48, 4N48A (COTS, TX, TXV) 4N48, 4N48A (COTS, TX, TXV) 4N48, 4N48A (COTS, TX, TXV) 1.00 1.40 1.00 - 5 - IF = 1.0 mA, VCE = 5.0 V, IB = 0 (1) IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = -55° C (1) IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = 100° C 4N49, 4N49A (COTS, TX, TXV) 4N49, 4N49A (COTS, TX, TXV) 4N49, 4N49A (COTS, TX, TXV) 2.00 2.80 2.00 - 10 - IF = 1.0 mA, VCE = 5.0 V, IB = 0 (1) IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = -55° C (1) IF = 2.0 mA, VCE = 5.0 V, IB = 0, TA = 100° C Coupled IC(ON) mA ICB(ON) On-State Collector Base 4N47, 4N48, 4N49 [A] (COTS, TX, TXV) 30 - - VCE(SAT) Collector-Emitter Saturation Voltage 4N22, 4N23, 4N24 [A] (COTS, TX, TXV) 4N22, 4N23, 4N24 [A] (COTS, TX, TXV) 4N22, 4N23, 4N24 [A] (COTS, TX, TXV) 4N47, 4N47A (COTS, TX, TXV) 4N48, 4N48A (COTS, TX, TXV) 4N49, 4N49A (COTS, TX, TXV) - - 0.30 0.30 0.30 0.30 0.30 0.30 HFE DC Current Gain 4N22, 4N22A (COTS, TX, TXV) 4N23, 4N23A (COTS, TX, TXV) 4N24, 4N24A (COTS, TX, TXV) 4N47, 4N48, 4N49 [A] (COTS, TX, TXV) 200 300 400 100 - - RIO Resistance (Input-to-Output) 4N22, 4N23, 4N24 [A] (COTS, TX, TXV) 4N47, 4N48, 4N49 [A] (COTS, TX, TXV) 1011 1011 - - Ω V10 = ± 1.0 VDC(3) VI-O = ± 1000 VDC(3) CIO Capacitance (Input-to-Output) - - 5 pF VI-O = 0 V, f = 1.0 MHz(3) µA V V VCB = 5 V, IE = 0, IF = 10 mA IF = 20 mA , IC = 2.5 mA, IB = 0 IF = 20 mA , IC = 5.0 mA, IB = 0 IF = 20 mA , IC = 10.0 mA, IB = 0 IF = 2.0 mA, IC = 0.5 mA, IB = 0 IF = 2.0 mA, IC = 1.0 mA, IB = 0 IF = 2.0 mA, IC = 2.0 mA, IB = 0 VCE = 5.0 V , IC = 10.0 mA, IF = 0 mA VCE = 5.0 V , IC = 10.0 mA, IF = 0 mA VCE = 5.0 V , IC = 10.0 mA, IF = 0 mA VCE = 5.0 V , IC = 10.0 mA, IF = 0 mA OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A .1 03/09 Page 5 of 5