datasheet: pdf - OPTEK Technology

Solid-State Relays
Panel Mount Package—VAC Input / VAC Output
OSSRA0007A thru OSSRA0012A
Features:
•
•
•
•
•
•
•
Molded Epoxy package
Zero crossing circuit
High Input/output Optical Isolation 4k Vrms
Superior heat sink package
Includes LED indicator
Fast switching time
Non-contact switch
Approval Agency:
•
UL Certification No: E321810
Description:
The OSSR Solid State Relay series are electronic controlled switches, they contain no moving parts.
When voltage is applied to the input, a Light Emitting Diode or LED illuminates a Photosensor which
controls the internal output circuit. The output circuit is utilized to drive high current loads. The input
and output are optically isolated. The OSSR series incorporates a zero crossing circuit which minimizes
current and noise surges due to resistive and inductive loads. Optek provides three different electrical
configurations of the OSSR series: DC input – AC output, AC input – AC output and DC input – DC
output. These configurations meet most industry applications.
The OSSRA000XA family comes in a standard panel mount package, commonly known as a “hockey
puck” package. The package offers a robust molded epoxy body with exceptional thermal dissipation
capability for a long reliable operational life.
The input circuit consists of a bridge rectifier circuit which features an AC range from 50 to 250 ADC.
The output consists of a Double Triac circuit featuring load current ratings from 10 to 40 Amps and
maximum load voltages from 250 to 480VAC with normally open output.
Protective plastic covers are included with shipment of OSSRA series.
Installation of the protection cover is necessary.
Applications:
•
•
•
•
•
•
Temperature controlled systems
Office equipment
Motor controls
Industrial Equipment
Light controls systems
Heater control
•
•
•
•
•
Appliances
HVAC temperature control
Plastic molding
Packaging industry
Food processing temperature
controls
1
Moisture
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.5 11/09
Page 1 of 12
Solid-State Relays
Panel Mount Package—VAC Input / VAC Output
OSSRA0007A thru OSSRA0012A
Package Outline Dimensions: Panel Mount
All dimensions in: inches [millimeters]
Tolerance: ±0.004” [0.10mm]
Schematic: Top View
4
1
3
2
OSSRA0007A thru OSSRA0012A
Pin Configuration
Pin #
Part Number
1
2
3
4
OSSRA0007A
A (-)
A (+)
A
K
OSSRA0008A
A (-)
A (+)
A
K
OSSRA0009A
A (-)
A (+)
A
K
OSSRA0010A
A (-)
A (+)
A
K
OSSRA0011A
A (-)
A (+)
A
K
OSSRA0012A
A (-)
A (+)
A
K
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.5
11/09
Page 2 of 12
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Solid-State Relays
Panel Mount Package—VAC Input / VAC Output
OSSRA0007A thru OSSRA0012A
VAC Input / VAC Output Devices Ordering Information
Part Number
Input
Min. Tgr Max. Output Min. Ouput
Max. Vout Min. Vout
Current
Current
Current Ift
Output
Type
Br. Vol.
Input to
Output
Configuration
OSSRA0007A 100-240VAC
50mA
10A
0.05A
250VAC
50VAC
AC
4000VAC
A K —A1(+) A2(-)
OSSRA0008A 100-240VAC
50mA
15A
0.05A
250VAC
50VAC
AC
4000VAC
A K —A1(+) A2(-)
OSSRA0009A 100-240VAC
50mA
25A
0.05A
250VAC
50VAC
AC
4000VAC
A K —A1(+) A2(-)
OSSRA0010A 100-240VAC
50mA
40A
0.05A
250VAC
50VAC
AC
4000VAC
A K —A1(+) A2(-)
OSSRA0011A 100-240VAC
50mA
25A
0.05A
480VAC
75VAC
AC
4000VAC
A K —A1(+) A2(-)
OSSRA0012A 100-240VAC
50mA
40A
0.05A
480VAC
75VAC
AC
4000VAC
A K —A1(+) A2(-)
Configuration: Definition of Terms
Configuration
Information
LED
Sensor
LED Identification—Sensor Identification
A = Anode , K = Cathode
A1(+) and A2(-) = Main Terminals of Double Triac
Part Number Symbolization
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.5 11/09
Page 3 of 12
Solid-State Relays
Panel Mount Package—VAC Input / VAC Output
OSSRA0007A thru OSSRA0012A
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Storage Temperature
OSSRA0007A thru OSSRA0012A
-30° C to +100° C
Operating Temperature
OSSRA0007A thru OSSRA0012A
-30° C to +80° C
Isolation Voltage (Input to Output)
OSSRA0007A thru OSSRA0012A
4,000 Vrms
Input Diode
Input Signal Voltage—(VIN)
OSSRA0007A thru OSSRA0012A
100– 240 VAC
Drop-out Voltage—(Vdo)
OSSRA0007A thru OSSRA0012A
10 VAC
Output Triac
RMS On-State Current - (IT)
OSSRA0007A
OSSRA0008A
OSSRA0009A, OSSRA0011A
OSSRA0010A, OSSRA0012A
10 Arms
15 Arms
25 Arms
40 Arms
Peak One Cycle Surge Current - (I surge)
OSSRA0007A
OSSRA0008A
OSSRA0009A, OSSRA0011A
OSSRA0010A, OSSRA0012A
100 A
150 A
250 A
400 A
Repetitive Peak-Off State Voltage—(VDRM)
OSSRA0007A thru OSSRA0010A
OSSRA0011A, OSSRA0012A
600 V
800 V
Operating Frequency—(f)
OSSRA0007A thru OSSRA0012A
47—70 Hz
Critical Rate of Rise of On-State Current—(di/dt)
OSSRA0007A thru OSSRA0012A
Load Supply Voltage—(VOUT)
OSSRA0007A thru OSSRA0010A
OSSRA0011A, OSSRA0012A
50 A/µS
50 V/µS
250 Vrms AC
480 Vrms AC
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.5
11/09
Page 4 of 12
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Solid-State Relays
Panel Mount Package—VAC Input / VAC Output
OSSRA0007A thru OSSRA0012A
Electrical Characteristics
SYMBOL
PARAMETER
MIN
TYP
MAX
UNIT
S
-
-
100
VAC
-
11
-
KΩ
TEST CONDITIONS
Input Diode
VPU
Pick-up Voltage
OSSRA0007A thru OSSRA0012A
RIN
Input Resistance
OSSRA0007A thru OSSRA0012A
RIN = 11KΩ
Output Triac
VT
On-State Voltage
OSSRA0007A thru OSSRA0012A
-
-
1.5
IOP
Operating Current
OSSRA0007A thru OSSRA0010A
OSSRA0011A, OSSRA0012A
50
50
-
-
mArms
Vout = 240Vrms
Vout = 480Vrms
ILEAK
Leakage Current
OSSRA0007A thru OSSRA0010A
OSSRA0011A, OSSRA0012A
-
3.5
-
8
14
mArms
Vout = 240Vrms
Vout = 480Vrms
dv/dt
Critical Rate of Rise of Off-State Voltage
OSSRA0011A, OSSRA0012A
OSSRA0007A thru OSSRA0010A
50
100
150
-
-
V/µs
Vrms
IT = 1Arms
See Note 1.
-
Zero-Cross Voltage
OSSRA0007A thru OSSRA0012A
-
Yes
-
-
VOUT
Load Voltage Rating
OSSRA0007A thru OSSRA0010A
OSSRA0011A, OSSRA0012A
50
75
-
280
480
VAC
IT = 50mArms MIN
IFT
Minimum Trigger Current
OSSRA0007A, thru OSSRA0009A
OSSRA0010A thru OSSRA0012A
-
-
25
25
mA
VDRM = 600 V
VDRM = 800 V
10^10
-
-
Ω
DC500 V
-
Riso
Isolation resistance Input to Output
OSSRA0007A thru OSSRA0012A
TON
Turn-on Time
OSSRA0007A thru OSSRA0012A
-
-
8.3
mS
60Hz AC
TOFF
Turn-off Time
OSSRA0007A thru OSSRA0012A
-
-
8.3
mS
60Hz AC
Thermal Resistance (between junction and case)
-
1.3
-
° C/W
Rth (j-C) l
−
Note1: Output (dv/dt) protection is provided in all models, and they are designed to switch resistive or inductive loads to 0.2 factor. The dv/dt rating is based on
source impedance of 50 ohms.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.5 11/09
Page 5 of 12
Solid-State Relays
Panel Mount Package—VAC Input / VAC Output
OSSRA0007A thru OSSRA0012A
OSSRA0007A thru OSSRA0010A
Characteristic Data Curves
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.5
11/09
Page 6 of 12
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Solid-State Relays
Panel Mount Package—VAC Input / VAC Output
OSSRA0007A thru OSSRA0012A
OSSRA0011A
Characteristic Data Curves
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.5 11/09
Page 7 of 12
Solid-State Relays
Panel Mount Package—VAC Input / VAC Output
OSSRA0007A thru OSSRA0012A
OSSRA0012A
Characteristic Data Curves
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.5
11/09
Page 8 of 12
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Solid-State Relays
Panel Mount Package—VAC Input / VAC Output
OSSRA0007A thru OSSRA0012A
Quality and Reliability Requirements:
Parameter
Failure Criteria
Test Conditions
Room Temperature Operating Life
(for light emitting diodes only)
± 20%
TA = 25°C, IF = 60mA or max. rated,
Time = 1000 hours
JEDEC, Method A101-B
TA = 85°C, Humidity = 85%RH,
Time = 1000 hours,
JEDEC, Method A108-A
TA = 70°C, IF = 20mA, Time = 1000 hours
High Humidity, High Temperature
Reverse Bias
± 20%
High Temperature Forward Bias
± 20%
Autoclave
0 Fail
TA = 121°C, Pressure = 15psi,
Humidity = 100%
IR Reflow / Solderability Test
0 Fail
JEDEC (J-STD-020) /
MIL-STD-883E, Method 2003.7
MTTF @ 90% confidence
150,000 Min.
@ 25°C, 25mADC
Moisture Sensitivity Level
MSL 1
per JDEC stnd J-STD-020B
Glass Transition of body
125°C Min.
DSC test method
Temperature Humidity-Bias
± 20%
85°C, 85%RH, 500Hrs, 80% min Iceo
Temperature Cycle
± 20%
per Method 1010.7 of MIL-STD-883E
High Temperature Storage
± 20%
85°C, 500Hrs
Label Identification:
Carrollton, TX, USA
DESCRIPTION:
Size: 3” (7.4 cm) X 2.2” (5.5 cm)
Lettering shall be black on white background.
Format shall be as:
Notes:
1. The DATE CODE is a 4-digit code for date of manufacture where YY is
the last two digits of the year, and WW is week number of manufacture.
2. The LOT I.D. is the manufacturing location lot identification where Y is
the year of manufacture, NNNN is a sequential lot identifier, and DDD is
the day of the year of manufacture. – or use equivalent label format.
MADE IN TAIWAN
OPTEK P/N __OSSRA0007A_
IIIIIIIIIIIIIIIIIIIII
QTY. ________N/A_________
IIIIIIIIIIIIIIIIIIIII
DATE CODE _____(YYWW)___
IIIIIIIIIIIIIIIIIIIII
LOT I.D. ____(Y-NNNNDDD)__
IIIIIIIIIIIIIIIIIIIII
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.5 11/09
Page 9 of 12
Solid-State Relays
Panel Mount Package—VAC Input / VAC Output
OSSRA0007A thru OSSRA0012A
Packaging Information:
Tray and Carton Packaging Specifications:
Tray Packaging Dimensions
All dimensions in centimeters (mm)
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.5
11/09
Page 10 of 12
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Solid-State Relays
Panel Mount Package—VAC Input / VAC Output
OSSRA0007A thru OSSRA0012A
Tray and Carton Packaging Specifications (Cont.):
Carton Packaging Dimensions
All dimensions in centimeters (cm)
All dimensions in centimeters (cm)
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.5 11/09
Page 11 of 12
Solid-State Relays
Panel Mount Package—VAC Input / VAC Output
OSSRA0007A thru OSSRA0012A
Tray and Carton Packaging Specifications (Cont.):
Carton Packaging Dimensions
All dimensions in centimeters (cm)
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.5
11/09
Page 12 of 12
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com