OSSRD2001D and OSSRD2002A

Solid State Relays
4-Pin SIP Package—VDC Input—VAC/VDC Output
OSSRD2001D and OSSRD2002A
Features:
•
•
•
•
•
•
•
Molded Epoxy package
Zero crossing circuit
High Input/output Optical Isolation 4k Vrms
Small size and light weight
Can be installed directly on the P.C. board
Fast switching time
Non-contact switch
Approval Agency:
•
UL Certification No: E321810
Description:
The OSSR Solid State Relay series are electronic controlled switches, they contain no moving parts.
When voltage is applied to the input, a Light Emitting Diode or LED illuminates a Photosensor which
controls the internal output circuit. The output circuit is utilized to drive high current loads. The input
and output are optically isolated. The OSSR series incorporates a zero crossing circuit which minimizes
current and noise surges due to resistive and inductive loads. Optek provides three different electrical
configurations of the OSSR series: DC input – AC output, AC input – AC output and DC input – DC
output. These configurations meet most industry applications.
The OSSRD2001D and OSSRD2002A are offered in a standard 4-pin SIP, Single In-Line Package, for
PCB mounting applications. The package offers a light weight, compact and robust molded epoxy body
with extended operating temperature range of up to 100°C.
The OSSRD2001D input circuit features a DC range from 4 to 24 VDC. The output consists of a photo
darlington circuit featuring a load current rating of 3 Amps and a maximum load voltage of 100VDC and
30 Watts with normally open output.
The OSSRD2002A input circuit features a DC range from 4 to 32 VDC. The output consists of a Triac
circuit featuring a load current rating of 3 to 40 Amps and a maximum load voltage of 250VAC with
normally open output.
Applications:
•
•
•
•
•
•
•
•
•
•
Temperature controlled systems
Office equipment
Motor controls
Industrial Equipment
Light controls systems
Heater control
Appliances
HVAC temperature control
Plastic molding
Packaging industry
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.3 11/09
Page 1 of 12
Solid State Relays
4-Pin SIP Package—VDC Input—VAC/VDC Output
OSSRD2001D and OSSRD2002A
Package Outline Dimensions: 4-Pin SIP
Tolerance: 0.2mm [millimeters]
All dimensions in Inches [millimeters]
Schematic: Top View
+
LOAD
+
INPUT
+
LOAD
+
INPUT
OSSRD2002A
OSSRD2001D
Pin Configuration:
Pin #
Part Number
1
2
3
4
OSSRD2001D
A
K
C
E (Dar.)
OSSRD2002A
A
K
A1 (+)
A2 (-)
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.3
11/09
Page 2 of 12
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Solid State Relays
4-Pin SIP Package—VDC Input—VAC/VDC Output
OSSRD2001D and OSSRD2002A
VDC Input with VDC/VAC Output Devices Ordering Information
Part Number
Min. Tgr Max. Output Min. Ouput
Max. Vout Min. Vout
Current Ift Current
Current
Input
Output
Type
Br. Vol.
Configuration
Input to
Output
OSSRD2001D 4-24VDC
100mA
3A
0.05A
100VDC
-
DC
4000VAC
A K—C E (Darl.)
OSSRD2002A 4-32VDC
50mA
3A
0.05A
250VAC
50VAC
AC
4000VAC
A K—A1(+) A2(-)
Configuration: Definition of Terms
LED Identification—Sensor Identification
LED
Configuration
Information
A = Anode
K = Cathode
C = Collector
E = Emitter
Sensor
A1(+) and A2(-) = Main Terminals of Triac
Part Number Symbolization
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.3 11/09
Page 3 of 12
Solid State Relays
4-Pin SIP Package—VDC Input—VAC/VDC Output
OSSRD2001D and OSSRD2002A
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Storage Temperature
OSSRD2001D, OSSRD2002A
-30° C to +125° C
Operating Temperature
OSSRD2001D, OSSRD2002A
-30° C to +100° C
Isolation Voltage (Input to Output)
OSSRD2001D, OSSRD2002A
4,000 Vrms
Soldering Temperature 10 sec.
OSSRD2001D, OSSRD2002A
260° C
Input Diode
Input Signal Voltage—(VIN)
OSSRD2001D
OSSRD2002A
4—24 VDC
4—32 VDC
Drop-out Voltage—(Vdo)
OSSRD2001D, OSSRD2002A
1 VDC
Output Power Dissipation—(Pc)
OSSRD2001D
30 W
Output Triac
RMS On-State Current - (IT)
OSSRD2002A
3 Arms
Peak One Cycle Surge Current - (I surge)
OSSRD2001D @ 50µS
OSSRD2002A @ 8.3ms
Repetitive Peak-Off State Voltage—(VDRM)
OSSRD2002A
Operating Frequency—(f)
OSSRD2002A
9A
30 A
600 V
47—70 Hz
Critical Rate of Rise of On-State Current—(di/dt)
OSSRD2002A
Load Supply Voltage—(VOUT)
OSSRD2002A
50 A/µS
250 Vrms AC
Output Photo Darlington
Collector Voltage - (VCEO)
OSSRD2001D
100 VDC
Output Current - (Io)
OSSRD2001D
3A
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.3
11/09
Page 4 of 12
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Solid State Relays
4-Pin SIP Package—VDC Input—VAC/VDC Output
OSSRD2001D and OSSRD2002A
Electrical Characteristics (TA = 25o C unless otherwise noted)
SYMBOL
PARAMETER
MIN
TYP
MAX
UNITS
TEST CONDITIONS
-
-
4
VDC
5
-
25
12
mA
VIN= 4 - 24 V
VIN= 4 - 32 V
-
30
-
pF
V=0, f=1kHz
Vrms
Input Diode
VPU
Pick-up Voltage
OSSRD2001D, OSSRD2002A
IIN
Input Current
OSSRD2001D
OSSRD2002A
CT
Terminal Capacitance
OSSRD2001D
IT = 1Arms
Output Triac
VT
On-State Voltage
OSSRD2002A
-
-
1.5
IOP
Operating Current
OSSRD2002A
50
-
-
mArms Vout = 240Vrms
-
-
7
mArms Vout = 240Vrms
50
200
-
V/µs
-
Yes
-
-
50
-
280
VAC
-
-
10
25
mA
10^10
-
-
Ω
DC500 V
ILEAK
Leakage Current
OSSRD2002A
dv/dt
Critical Rate of Rise of Off-State Voltage
OSSRD2002A
-
Zero-Cross Voltage
OSSRD2002A
VOUT
Load Voltage Rating
OSSRD2002A
IFT
Minimum Trigger Current
OSSRD2002A
IT = 1Arms
See Note 1.
IT = 50mArms MIN
VDRM = 600 V
Riso
Isolation resistance Input to Output
OSSRD2002A
TON
Turn-on Time
OSSRD2002A
-
-
8.3
mS
60Hz AC
TOFF
Turn-off Time
OSSRD2002A
-
-
8.3
mS
60Hz AC
Thermal Resistance (between junction and case)
-
1.3
-
°C/W
Rth (j-C) l
−
Note1: Output (dv/dt) protection is provided in all models, and they are designed to switch resistive or inductive loads to 0.2 factor. The dv/dt rating is based on
source impedance of 50 ohms.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.3 11/09
Page 5 of 12
Solid State Relays
4-Pin SIP Package—VDC Input—VAC/VDC Output
OSSRD2001D and OSSRD2002A
Electrical Characteristics (TA = 25o C unless otherwise noted)
SYMBOL
PARAMETER
MIN
TYP
MAX UNITS
TEST CONDITIONS
100
-
-
Vrms
-
-
1.5
µA
IF = 0mA, V=100V
0.05
-
3
A
IF = 1mA, VCE=2V
-
Yes
-
-
IF = 20mA, IC=100mA
Output Photodiode
BVCEO
ILEAK
IC
VCE(sat)
Collector-Emitter Breakdown Voltage
OSSRD0001D
Output LeakCurrent
OSSRD0001D
Collector Current
OSSRD0001D
Collector-Emitter Saturation Voltage
OSSRD0001D
IF = 0mA
Riso
Isolation Resistance
OSSRD0001D
1010
-
-
Ω
DC500 V
Cr
Floating Capacitance
OSSRD0001D
-
-
3
pF
V=0, f=1MHz
fc
Cut-Off Frequency
OSSRD0001D
2
-
-
Hz
VCE = 2V, IC=200mA,
RL=200mA
tf
Response Time (Rise)
OSSRD0001D
-
-
500
µS
VCE = 2V, IC=20mA,
RL=200mA
tr
Response Time (Fall)
OSSRD0001D
-
-
200
µS
VCE = 2V, IC=20mA,
RL=200mA
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.3
11/09
Page 6 of 12
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Solid State Relays
4-Pin SIP Package—VDC Input—VAC/VDC Output
OSSRD2001D and OSSRD2002A
OSSRD2001D
Characteristic Data Curves
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.3 11/09
Page 7 of 12
Solid State Relays
4-Pin SIP Package—VDC Input—VAC/VDC Output
OSSRD2001D and OSSRD2002A
OSSRD2002A
Characteristic Data Curves
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.3
11/09
Page 8 of 12
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Solid State Relays
4-Pin SIP Package—VDC Input—VAC/VDC Output
OSSRD2001D and OSSRD2002A
Quality and Reliability Requirements
Parameter
Failure Criteria
Test Conditions
Room Temperature Operating Life
(for light emitting diodes only)
± 20%
TA = 25°C, IF = 60mA or max. rated,
Time = 1000 hours
High Humidity, High Temperature
Reverse Bias
± 20%
JEDEC, Method A101-B
TA = 85°C, Humidity = 85%RH,
Time = 1000 hours
High Temperature Forward Bias
± 20%
JEDEC, Method A108-A
TA = 70°C, IF = 20mA, Time = 1000 hours
Autoclave
0 Fail
TA = 121°C, Pressure = 15psi,
Humidity = 100%
IR Reflow / Solderability Test
0 Fail
JEDEC (J-STD-020) /
MIL-STD-883E, Method 2003.7
MTTF @ 90% confidence
150,000 Min.
@ 25°C, 25mADC
Moisture Sensitivity Level
MSL 1
per JDEC stnd J-STD-020B
Glass Transition of body
125°C Min.
DSC test method
Temperature Humidity-Bias
± 20%
85°C, 85%RH, 500Hrs, 80% min Iceo
Temperature Cycle
± 20%
per Method 1010.7 of MIL-STD-883E
High Temperature Storage
± 20%
85°C, 500Hrs
Label Identification:
DESCRIPTION:
Size: 3” (7.4 cm) X 2.2” (5.5 cm)
Lettering shall be black on white background.
Format shall be as:
Notes:
1. The DATE CODE is a 4-digit code for date of manufacture where YY is
the last two digits of the year, and WW is week number of manufacture.
2. The LOT I.D. is the manufacturing location lot identification where Y is
the year of manufacture, NNNN is a sequential lot identifier, and DDD is
the day of the year of manufacture. – or use equivalent label format.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.3 11/09
Page 9 of 12
Solid State Relays
4-Pin SIP Package—VDC Input—VAC/VDC Output
OSSRD2001D and OSSRD2002A
Packaging Information:
Tray and Carton Packaging Specifications:
Tube Packaging Dimensions
All dimensions in millimeters
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.3
11/09
Page 10 of 12
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Solid State Relays
4-Pin SIP Package—VDC Input—VAC/VDC Output
OSSRD2001D and OSSRD2002A
Tray and Carton Packaging Specifications (Cont.):
Carton Packaging Dimensions
Inner Carton
All dimensions in millimeters
Medium Carton
All dimensions in millimeters
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.3 11/09
Page 11 of 12
Solid State Relays
4-Pin SIP Package—VDC Input—VAC/VDC Output
OSSRD2001D and OSSRD2002A
Tray and Carton Packaging Specifications (Cont.):
Carton Packaging Dimensions
Large Carton
All dimensions in millimeters
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.3
11/09
Page 12 of 12
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com