OPIA500B, OPIA4N35, OPIA4N33 OPIA2110, OPIA2210, OPIA5010, OPIA6010 SMD and SOP Packages 5 Pin Features: • • • • 3,750 or 5,000 Vrms electrical isolation Choice of a Single and Dual LED Phototransistor or Photo Darlington Sensor Low-cost plastic Dual-In-Line (DIP) package Agency Approvals: • • UL Certification No: E58730 VDE No: 40026624,40026625 6 Pin Description: The OPIA series optocouplers are designed for applications that use an analog output (Phototransistor or Photo Darlington) in a dual-in-line package. A wide selection of configurations are available. With typical isolation voltage of 3,750 or 5,000 Volts(RMS), these product meet typical power system isolation requirements. Theory of operation: The LED transmitter is used to illuminate the Photosensor providing electrical isolation between two power systems while maintaining the ability to transmit information from one power system to the other. In many applications, analog signal levels may be required to be transmitted between two power systems while maintaining isolation between the power systems up to 5,000 Volts(RMS). A variety of LED and photosensor configurations are available depending on the system requirements. The ratio Current Transfer Ratio (CTR) is determined using the output current and input current for analog photosensors. CTR ratios can range from as low as 5 to over 9,000 depending on the device. CTR = Photosensor − Current 20mA = *100 = 200 10mA LED − Current All SMD product is shipped in tape and reel with “TR” identified on the end of the part number. Example: OPI4N35ATRE is a 6-Pin SMD shipped in tape and reel (TR). . Applications: • • High voltage isolation PCBoard power system isolation RoHS • • • Industrial equipment power isolation Medical equipment power isolation Office equipment OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.5 9/09 Page 1 of 23 OPIA500B, OPIA4N35, OPIA4N33 OPIA2110, OPIA2210, OPIA5010, OPIA6010 SMD and SOP Packages Package Outline Dimensions and Schematics: Top-View Package Style B (SOP) OPIA500 Package Style A (SMD) OPIA60X Pin # Part Number 1 2 3 4 5 OPIA500 A K E C K 6 OPI4N35 A K E C B OPIA5010 A K E C B OPI4N33 A K E C B OPIA2210 A K E C B OPIA6010 A-K K-A E C B OPIA2110 A K E C Symbol Definition Symbol Definition Symbol Definition Symbol Definition Symbol Definition A Anode B Base C Collector E Emitter K Cathode Analog Output Devices Ordering Information Part Number OPIA500B OPI4N35A OPIA5010A OPI4N33A OPIA2210A OPIA6010A OPIA2110A LED Sensor Packaging Isolation Voltage Max. (Vrms) 3,750 5,000 5,000 5,000 5,000 5,000 5,000 A = Anode B = Base CTR Typ. Tr / Tf (µs) Min/Typ/Max RL = 100 ohms 19 / - / 50 LH-HL 0.8 / 0.8 (1.9K) 60 / - / 600 5/4 600 / - / 9,000 60 / 50 500 / 4,000 / 5 / 60 50 / - / 600 2/3 50 / - / 600 2/3 40 / - / 400 4/3 Configuration: Definition of Terms LED Identification—Sensor Identification K = Cathode C = Collector E = Emitter Part Number Suffix: TU = Ship in Tubes Package Configuration 5-Pin SOP 6-Pin SMD 6-Pin SMD 6-Pin SMD 6-Pin SMD 6-Pin SMD 6-Pin SMD AK—KCE A K—B C E A K—B C E (Dar) A K—B C E (Dar) A K—B C E A K, K A—B C E A K—C E (Dar) = Photo Darlington TR = Tape and Reel Example: OPI4N35ATRE OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.5 9/09 Page 2 of 23 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com OPIA500B, OPIA4N35, OPIA4N33 OPIA2110, OPIA2210, OPIA5010, OPIA6010 SMD and SOP Packages Absolute Maximum Ratings (TA = 25o C unless otherwise noted) Storage Temperature Operating Temperature OPI4N35, OPIA5010, OPI4N33 OPIA500 OPIA2210, OPIA6010, OPIA2110 Isolation voltage (1 minute) OPIA6XX Series OPIA500 Total Package Power Dissipation OPIA6XX Series OPIA500 -55° C to +125° C -30° C to +100° C -55° C to +85° C -55° C to +125° C Lead Soldering Temperature (1/16” (1.6 mm) from case for 5 seconds with soldering iron) 5,000 Vrms 3,750 Vrms 200 mW 100 mW 260° C Input Diode Continuous Forward Current OPIA6XX Series OPIA500 Peak Forward current (1 µs pulse width, 300 pps) OPIA6XX Series OPIA500 Reverse Voltage OPIA6XX Series OPIA500 Power Dissipation OPIA6XX Series OPIA500 50 mA 25 mA 1A 200 mA 6V 5V 70 mW 45 mW Output Phototransistor Collector-Emitter Voltage OPI4N35, OPIA6010, OPIA2110 OPIA2210 OPIA5010 OPI4N33 Emitter-Collector Voltage OPI4N35, OPIA2110 OPIA2210, OPIA6010 OPIA5010, OPI4N33 Collector Current OPI4N35, OPIA2210, OPIA6010, OPIA2110 OPIA5010, OPI4N33 Power Dissipation OPIA500 OPI4N35, OPIA2110 OPIA5010, OPI4N33, OPIA2210, OPIA6010 60 V 350 V 300 V 30 V 6V 7V 50 mA 150 mA 100 mW 150 mW 200 mW OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.5 9/09 Page 3 of 23 OPIA500B, OPIA4N35, OPIA4N33 OPIA2110, OPIA2210, OPIA5010, OPIA6010 SMD and SOP Packages Electrical Characteristics: (OPIA500B) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.5 9/09 Page 4 of 23 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com OPIA500B, OPIA4N35, OPIA4N33 OPIA2110, OPIA2210, OPIA5010, OPIA6010 SMD and SOP Packages Electrical Characteristics (OPIA6XX Series) PARAMETER SYMBOL MIN TYP MAX - 1.2 1.4 UNITS TEST CONDITIONS Input Diode Forward Voltage OPI4N35, OPIA5010, OPI4N33, OPI604, OPIA2110 OPIA2210 1.0 1.2 1.3 VFM Peek Forward Voltage OPI4N35, OPIA5010, OPI4N33, OPI604 OPIA2210, OPIA2110 - - 3.5 3.0 Ir Reverse Current OPI4N35, OPIA5010, OPI4N33, OPI604, OPIA2110 OPIA2210 - - 10 Vf Ct Terminal Capacitance OPI4N35, OPIA5010, OPI4N33, OPI604, OPIA2110 OPIA2210 IF = 20 mA V IF = 10 mA V IFM = 500 mA VR = 4 V µA - - 10 - 30 - VR = 5 V V = 0.0 V, f = 1K Hz pf - 30 - V = 0.0 V, f = 1M Hz Output Phototransistor—OPI4N35D, OPIA2210D, OPIA6010D, OPIA2110D ICEO Collector dark Current OPI4N35, OPIA6010, OPIA2110 OPIA2210 - 10 100 200 nA IF = 0 mA, VCE = 20 V IF = 0 mA, VCE = 300 V VCEO Collector-emitter Saturation Voltage OPI4N35, OPIA6010, OPIA2110 OPIA2210 - 0.1 - 0.3 0.4 V IF = 20 mA, IC = 1 mA IF = 8 mA, IC = 2.4 mA fC Cutt-Off frequency - 80 - K Hz VCC = 5 V, IC = 2 mA, RL = 100 Ω tr Rise Time OPI4N35, OPIA6010 OPIA2210 OPIA2110 - 5 2 4 20 20 µs VCC = 5 V, IC = 2 mA, RL = 100 Ω VCC = 10 V, IC = 2 mA, RL = 100 Ω VCC = 2 V, IC = 2 mA, RL = 100 Ω tf Fall Time OPI4N35, OPIA6010 OPIA2210 OPIA2110 - 4 3 3 20 20 µs VCC = 5 V, IC = 2 mA, RL = 100 Ω VCC = 10 V, IC = 2 mA, RL = 100 Ω VCC = 2 V, IC = 2 mA, RL = 100 Ω Continued on Next Page OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.5 9/09 Page 5 of 23 OPIA500B, OPIA4N35, OPIA4N33 OPIA2110, OPIA2210, OPIA5010, OPIA6010 SMD and SOP Packages Electrical Characteristics (OPIA6XX Series) - Continued from Previous Page PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS Output PhotoDarlington—OPIA5010D, OPI4N332D ICEO Collector dark Current OPIA5010 OPI4N33 - - 1.0 0.1 µA IF = 0 mA, VCE = 200 V IF = 0 mA, VCE = 10 V VCEO Collector-emitter Saturation Voltage OPIA5010 OPI4N33 - - 1.5 1.0 V IF = 20 mA, IC = 5 mA IF = 8 mA, IC = 2 mA fC Cutt-Off frequency OPIA5010, OPI4N33 - 7.0 - K Hz tr Rise Time OPIA5010 OPI4N33 - 60 5 300 40 µs VCC = 2 V, IC = 20 mA, RL = 100 Ω VCC = 10 V, IC = 50 mA, RL = 100 Ω tf Fall Time OPIA5010 OPI4N33 - 50 60 250 100 µs VCC = 2 V, IC = 20 mA, RL = 100 Ω VCC = 10 V, IC = 50 mA, RL = 100 Ω % IF = 2 mA, VCE = 5.0 V IF = 2 mA, VCE = 5.0 V IF = 10 mA, VCE = 10.0 V IF = 5 mA, VCE = 5.0 V IF = 1 mA, VCE = 5.0 V IF = 10 mA, VCE = 5.0 V 1.0 pF V = 0.0 V, f = 1M Hz - ohm VCC = 5 V, IC = 2 mA, RL = 100 Ω Coupled Characteristics Phototransistor/Photodarlington CTR Current Transfer Ratio OPI4N35 OPIA5010 OPI4N33 OPIA2210 OPIA6010 OPIA2110 60 600 500 50 60 40 Cf Floating Capacitance - RISO Isolation resistance 5X10 600 9,000 4,000 600 600 400 0.6 10 11 10 DC500V OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.5 9/09 Page 6 of 23 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com OPIA500B, OPIA4N35, OPIA4N33 OPIA2110, OPIA2210, OPIA5010, OPIA6010 SMD and SOP Packages OPI4N35 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.5 9/09 Page 7 of 23 OPIA500B, OPIA4N35, OPIA4N33 OPIA2110, OPIA2210, OPIA5010, OPIA6010 SMD and SOP Packages OPI4N35 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.5 9/09 Page 8 of 23 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com OPIA500B, OPIA4N35, OPIA4N33 OPIA2110, OPIA2210, OPIA5010, OPIA6010 SMD and SOP Packages OPIA5010 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.5 9/09 Page 9 of 23 OPIA500B, OPIA4N35, OPIA4N33 OPIA2110, OPIA2210, OPIA5010, OPIA6010 SMD and SOP Packages OPIA5010 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.5 9/09 Page 10 of 23 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com OPIA500B, OPIA4N35, OPIA4N33 OPIA2110, OPIA2210, OPIA5010, OPIA6010 SMD and SOP Packages OPI4N33 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.5 9/09 Page 11 of 23 OPIA500B, OPIA4N35, OPIA4N33 OPIA2110, OPIA2210, OPIA5010, OPIA6010 SMD and SOP Packages OPI4N33 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.5 9/09 Page 12 of 23 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com OPIA500B, OPIA4N35, OPIA4N33 OPIA2110, OPIA2210, OPIA5010, OPIA6010 SMD and SOP Packages OPIA2210 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.5 9/09 Page 13 of 23 OPIA500B, OPIA4N35, OPIA4N33 OPIA2110, OPIA2210, OPIA5010, OPIA6010 SMD and SOP Packages OPIA2210 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.5 9/09 Page 14 of 23 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com OPIA500B, OPIA4N35, OPIA4N33 OPIA2110, OPIA2210, OPIA5010, OPIA6010 SMD and SOP Packages OPIA6010 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.5 9/09 Page 15 of 23 OPIA500B, OPIA4N35, OPIA4N33 OPIA2110, OPIA2210, OPIA5010, OPIA6010 SMD and SOP Packages OPIA6010 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.5 9/09 Page 16 of 23 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com OPIA500B, OPIA4N35, OPIA4N33 OPIA2110, OPIA2210, OPIA5010, OPIA6010 SMD and SOP Packages OPIA2110 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.5 9/09 Page 17 of 23 OPIA500B, OPIA4N35, OPIA4N33 OPIA2110, OPIA2210, OPIA5010, OPIA6010 SMD and SOP Packages OPIA2110 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.5 9/09 Page 18 of 23 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com OPIA500B, OPIA4N35, OPIA4N33 OPIA2110, OPIA2210, OPIA5010, OPIA6010 SMD and SOP Packages Quality / Reliability Requirements Failure Criteria Conditions ± 10% 11 samples after 500Hrs 0 Fail @ VCE = 5.0VDC, Ta = 70°C ± 10% 50 samples after 96Hrs 0 Fail @ Max PD, Ta = 25°C MTTF @ 90% confidence 150,000 Min. @ 25°C, 25mADC Moisture Sensitivity Level MSL 1 per JDEC stnd J-STD-020B Lead Solderability 0 Fail per Method 208 of MIL-STD-202. 125°C Min. DSC test method Temperature Humidity-Bias ± 20% 85°C, 85%RH, 500Hrs, 80% min Iceo Temperature Cycle ± 20% per Method 1010.7 of MIL-STD-883E High Temperature Storage ± 20% 85°C, 500Hrs Autoclave 0 Fail TA = 121°C, Pressure = 15psi, Humidity = 100%, Time = 96Hrs Parameter HTRB D IC(OFF) HTFB D IC(ON) Glass Transition of body Note: This is to be performed when a change occurs to form, fit or function. Government and Industry Standard Compliance Requirements European Union’s Reduction of Hazardous Substances (RoHS) Directive 2002/95/EC Label Identification Carrollton, TX, USA DESCRIPTION: Size: 3” (7.4 cm) X 2.2” (5.5 cm) Lettering shall be black on white background. Format shall be as: Notes: 1. The DATE CODE is a 4-digit code for date of manufacture where YY is the last two digits of the year, and WW is week number of manufacture. 2. The LOT I.D. is the manufacturing location lot identification where Y is the year of manufacture, NNNN is a sequential lot identifier, and DDD is the day of the year of manufacture. – or use equivalent label format. MADE IN TAIWAN OPTEK P/N __OPIA2110A-TR__ IIIIIIIIIIIIIIIIIIIII QTY. ________N/A_________ IIIIIIIIIIIIIIIIIIIII DATE CODE _____(YYWW)___ IIIIIIIIIIIIIIIIIIIII LOT I.D. ____(Y-NNNNDDD)__ IIIIIIIIIIIIIIIIIIIII OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.5 9/09 Page 19 of 23 OPIA500B, OPIA4N35, OPIA4N33 OPIA2110, OPIA2210, OPIA5010, OPIA6010 SMD and SOP Packages Packaging Information: Tube Optek's Optocoupler Part Numbers Packaging Quantities 4-PIN OPIA400D/A, OPIA410D/A OPIA413D/A P/H and 6-PIN SMD OPIA6XXD/A Series 8-PIN OPIA8XXD Series and OPID804D Qty Inner Small Carton Medium Carton Large Carton 52 x 7 x 7.5 cm 53.5 x 16 x 17.5 cm 53.5 x 30.7 x 17.5 cm 53.5 x 30.7 x 25 cm Weight Qty Weight Qty Weight Gross Weight Qty Weight Gross Weight Qty Gross Weight Weig ht 100 44 3,000 1.40 12,000 6.0 6.5 24,000 12.0 12.5 36,000 18.0 18.5 65 44 1,950 1.50 7,800 6.5 7.0 15,600 12.0 12.5 23,400 18.5 19.0 48 44 1,440 1.44 5,760 6.0 6.5 11,520 12.0 12.5 17,290 18.0 18.5 100 24 6,000 1.60 24,000 6.5 7.0 48,000 13.0 13.5 72,000 19.5 20.0 170 -- 10,200 -- M/F 4-PIN and 5-PIN OPIA401B - OPIA404B, OPIA414B, SOP OPIA500B 4-PIN SSOP OPIA405C - OPIA409C P/H = Pin-Hole Packages (Referred as D = Dual-In-Line Package) SMD = Standard Surface Mount Packages (Referred as A = 6.5mil SMD) M/F or SOP = Mini-Flat Packages or Small Outside Packages (Referred as B = 4.40mil SMD w/ 2.54mil LeadSpacing) SSOP = Shrink SOP Packages (Referred as C = 3.60mil SMD with 1.27mil Lead-Spacing) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.5 9/09 Page 20 of 23 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com OPIA500B, OPIA4N35, OPIA4N33 OPIA2110, OPIA2210, OPIA5010, OPIA6010 SMD and SOP Packages Tube Packaging Specifications—SMD (TU): DIMENSIONS ARE IN: INCHES [MILLIMETERS] TOLERANCE: ± 0.008 INCHES [± 0.2 MILLIMETERS] Quantity: 6-pin: 65pcs/tube Tube Packaging Specifications— SOP (Mini-flats) (TU): DIMENSIONS ARE IN: INCHES [MILLIMETERS] TOLERANCE: ± 0.008 INCHES [± 0.2 MILLIMETERS] Quantity: 5-pin: 100pcs/tube OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.5 9/09 Page 21 of 23 OPIA500B, OPIA4N35, OPIA4N33 OPIA2110, OPIA2210, OPIA5010, OPIA6010 SMD and SOP Packages Tape and Reel Packaging Specifications—SMD —(TR): 0.157 ± 0.004 [4.0 ± 0.1] 0.079± 0.004 [2.0 ± 0.1] Reel: 0.059± 0.002 [1.55 ± 0.05] 0.295± 0.004 [12.0 ± 0.1] 0.069 ± 0.004 [1.75 ± 0.1] 0.630 ± 0.01 [16.0 ± 0.3] 0.063 ± 0.004 [1.6 ± 0.1] 0.412 ± 0.004 [10.46 ± 0.1] 0.472 ± 0.004 [12.0 ± 0.1] 0.167 ± 0.004 [4.25 ± 0.1] 0.303 ± 0.004 [7.70 ± 0.1] 0.014 ± 0.002 [0.35 ± 0.05] Direction: DIMENSIONS ARE IN: INCHES [MILLIMETERS] TOLERANCE: ± 0.008 INCHES [± 0.2 MILLIMETERS] 0.059 ± 0.020 [1.5 ± 1.0] Reel: 0.65 ± 0.08 [16.40 ± 2.0] 0.511 ± 0.020 [13.0 ± 0.5] 12.99 ± 0.008 [330.0 ± 0.2] 0.795 ± 0.04 [20.2 ± 1.0] 4.0 ± 0.04 [101.6 ± 1.0] 0.079 ± 0.008 [2.0 ± 0.2] Quantity: 6-pin: 1000pcs/Reel OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.5 9/09 Page 22 of 23 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com OPIA500B, OPIA4N35, OPIA4N33 OPIA2110, OPIA2210, OPIA5010, OPIA6010 SMD and SOP Packages Tape and Reel Packaging Specifications—SOP (Mini-Flat) — (TR): 0.059± 0.002 [1.55 ± 0.05] 0.157 ± 0.004 [4.0 ± 0.1] 0.079± 0.004 [2.0 ± 0.1] 0.100 ± 0.004 [2.55 ± 0.1] 0.295± 0.004 [12.0 ± 0.1] 0.069 ± 0.004 [1.75 ± 0.1] 0.630 ± 0.01 [16.0 ± 0.3] 0.059 ± 0.004 [1.5 ± 0.1] 0.145 ± 0.004 [4.1 ± 0.1] 0.297 ± 0.004 [7.30 ± 0.1] 0.012 ± 0.004 [0.3 ± 0.01] 0.315 ± 0.004 [8.0 ± 0.1] Direction: DIMENSIONS ARE IN: INCHES [MILLIMETERS] TOLERANCE: ± 0.008 INCHES [± 0.2 MILLIMETERS] Reel: 0.059 ± 0.020 [1.5 ± 1.0] 0.65 ± 0.08 [16.40 ± 2.0] 0.511 ± 0.020 [13.0 ± 0.5] 12.99 ± 0.008 [330.0 ± 0.2] 4.0 ± 0.04 [101.6 ± 1.0] 0.795 ± 0.04 [20.2 ± 1.0] 0.079 ± 0.008 [2.0 ± 0.2] Quantity: 5-pin: 1000pcs/Reel OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.5 9/09 Page 23 of 23