Sensing and Control Optically Coupled Isolator OPI7002, OPI7002RCE, OPI7010, OPI7010RCE OPI7320, OPI7320RCE, OPI7340, OPI7340RCE Features: ± 6 kV electrical isola on Inexpensive plas c housing Choice of phototransistor or photodarlington output UL registered File No. E58730* Descrip on: Each OPI7002 and OPI7010 consists of an infrared emi ng diode coupled to a NPN silicon phototransistor. The LED and sensor are encased in a black, low‐cost plas c housing. Pin spacing is compa ble with standard dual‐in‐line packages. Each OPI7320 and OPI7340 consists of an infrared emi ng diode coupled to a NPN silicon photodarlington. The LED and sensor are encased in a high dielectric plas c housing. Pin spacing is compa ble with standard dual‐in‐line packages. The RCE versions reverses the Phototransistor Emi er and Collector pin‐out. Custom electrical, wire and cabling and connectors are available. Contact your local representa ve or OPTEK for more informa on. Applica ons: Requiring high voltage isola on between input and output Electrical isola on in dirty environments Industrial equipment OPI7002 Medical equipment OPI7010 Office equipment OPI7320 OPI7002, OPI7010 2 1 OPI7002RCE, OPI7010RCE 2 3 1 4 OPI7320, OPI7340 2 3 1 4 3 OPI7340 4 1 Sensor 890 nm Transistor 6 890 nm or 935 nm Darlington 6 20 100 200 400 10 / 50 30 0.30" / 0.30" 5 / 50 15 0.30" / 0.30" Pin # LED Pin # Transistor/ RCE 2 1 Cathode Anode 3 4 Collector / Emi er Emi er / Collector 4 [MILLIMETERS] INCHES General Note TT Electronics reserves the right to make changes in product specifica on without no ce or liability. All informa on is subject to TT Electronics’ own data and is considered accurate at me of going to print. © TT electronics plc Lead Isola on CTR IF (mA) VCE (Volts) Length / Voltage Max Min Typ / Max Spacing (,000) LED Peak Wavelength OPI7320RCE, OPI7340RCE 2 3 DIMENSIONS ARE IN: RoHS Ordering Informa on Part Number 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 www.optekinc.com | www. electronics.com Issue B.1 03/2015 Page 1 Sensing and Control Optically Coupled Isolator OPI7002, OPI7002RCE, OPI7010, OPI7010RCE OPI7320, OPI7320RCE, OPI7340, OPI7340RCE Absolute Maximum Ra ngs (TA = 25° C unless otherwise noted) Opera ng Temperature Range ‐40° C to +85° C Storage Temperature Range ‐40° C to +85° C (1)(4) Input‐to‐Output Isola on Voltage ±6 kVDC Lead Soldering Temperature [1/16 inch (1.6 mm) from the case for 5 seconds with soldering iron(2) 260° C Input Diode Forward DC Current 50 mA Peak Forward current (1 µs pulse width, 300 pps) 3 A Reverse Voltage 2 V (3) Power Dissipa on 100 mW Output Phototransistor Collector‐Emi er Voltage OPI7002, OPI7010, OPI7002RCE, OPI7010RCE 30 V OPI7320, OPI7340, OPI7320RCE, OPI7340RCE 15 V Emi er‐Collector Voltage 5.0 V (3) Power Dissipa on Notes: (1) (2) (3) (4) 100 mW Measured with input leads and output leads shorted. RMA flux is recommended. Dura on can be extended to 10 seconds maximum when flow soldering. Derate linearly 1.66 mW/° C above 25° C. UL recogni on is for 3500 V rms at 60 Hz. General Note TT Electronics reserves the right to make changes in product specifica on without no ce or liability. All informa on is subject to TT Electronics’ own data and is considered accurate at me of going to print. © TT electronics plc 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 www.optekinc.com | www. electronics.com Issue B.1 03/2015 Page 2 Sensing and Control Optically Coupled Isolator OPI7002, OPI7002RCE, OPI7010, OPI7010RCE OPI7320, OPI7320RCE, OPI7340, OPI7340RCE Electrical Characteris cs (TA = 25° C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode (See OP140 or OP240 for addi onal informa on—for reference only) VF Forward Voltage ‐ 1.2 1.70 V IF = 10 mA IR Reverse Current ‐ ‐ 100 µA VR = 2.0 V Output Phototransistor (OPI7002, OPI7010) (See OP550 for addi onal informa on—for reference only) Output Photodarlington (OPI7320, OPI7340) (See OP560 for addi onal informa on—for reference only) V(BR)CEO V(BR)ECO ICEO Collector‐Emi er Breakdown Voltage OPI7002/RCE, OPI7010/RCE OPI7320/RCE, OPI7340/RCE 30 15 ‐ ‐ ‐ ‐ V IC = 100 µA, IF = 0 Emi er‐Collector Breakdown Voltage 5 ‐ ‐ V IE = 100 µA, IF = 0 Collector‐Emi er Dark Current ‐ ‐ 100 nA VCE = 10 V, IF = 0 20 100 200 400 ‐ ‐ ‐ ‐ ‐ ‐ ‐ ‐ % IF = 10 mA, VCE = 5 V IF = 10 mA, VCE = 5 V IF = 5 mA, VCE = 5 V IF = 5 mA, VCE = 5 V IF = 10 mA, IC = 0.50 mA IF = 5 mA, IC = 2 mA Coupled IC/ IF DC Current Transfer Ra o OPI7002, OPI7002RCE OPI7010, OPI7010RCE OPI7320, OPI7320RCE OPI7340, OPI7340RCE V(SAT) Collector‐Emi er Satura on Voltage OPI7002/RCE, OPI7010/RCE OPI7320/RCE, OPI7340/RCE ‐ ‐ ‐ ‐ 0.4 1.0 V VISO Isola on Voltage(1) 6 ‐ ‐ kVDC T(ON) Turn‐On Time OPI7002/RCE, OPI7010/RCE OPI7320/RCE, OPI7340/RCE ‐ ‐ 4 150 ‐ ‐ T(OFF) Turn‐Off Time OPI7002/RCE, OPI7010/RCE OPI7320/RCE, OPI7340/RCE ‐ ‐ 3 125 ‐ ‐ Capacitance Input‐to‐Output(1) ‐ 0.2 ‐ CIO See note 1 µs VCE = 10 V, IC = 10 mA, RL = 100 Ω pF VIO = 0, F = 1 MHz Notes: (1) Measured with input leads and output leads shorted. General Note TT Electronics reserves the right to make changes in product specifica on without no ce or liability. All informa on is subject to TT Electronics’ own data and is considered accurate at me of going to print. © TT electronics plc 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 www.optekinc.com | www. electronics.com Issue B.1 03/2015 Page 3