SSR40C100S1 SSR40C120S1 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 40 A / 1200 V Schottky Silicon Carbide Rectifier Designer’s Data Sheet Part Number / Ordering Information 1/ SSR40C __ __ __ │ │ └ Screening 2/ __ = Not Screened │ │ TX = TX Level TXV = TXV │ │ S = S Level │ │ │ └ Package S1 = SMD1 │ └ Voltage 100 = 1000 V 120 = 1200 V FEATURES: 1200 Volt Silicon Carbide Schottky Rectifier Average Output Current 40 Amps No Reverse Recovery No Forward Recovery No Switching Time Change Over Temperature Small Package Size TX, TXV, and Space Level Screening Available. 2/ Consult Factory. MAXIMUM RATINGS 3/ Peak Repetitive and Peak Reverse Voltage Average Rectified Forward Current 4/ (Resistive Load, 60 Hz, Sine Wave) Peak Surge Current 4/ (8.3 ms Pulse, Half Sine Wave, TA = 25oC) Symbol Value Units VRRM VR 1000 1200 Volts Total IO 40 Amps Total IFSM 200 Amps TOP & Tstg -55 to +250 TJ -55 to +250 RθJC 0.6 SSR30C100S1 SSR30C120S1 Operating & Storage Temperature Junction Temperature Maximum Thermal Resistance (Junction to Case) 4/ Total o o C o C C/W NOTES: 1/ For Ordering Information, Price, and Availability Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC 4/ Terminal Pads 1 & 3 Must be connected together for testing and at the Board Level. SMD1 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0043D DOC SSR40C100S1 SSR40C120S1 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS 3/ 4/ Instantaneous Forward Voltage Drop (TA=25ºC, Pulse) Instantaneous Forward Voltage Drop (TA=150ºC, Pulse) Instantaneous Forward Voltage Drop (TA=-55ºC, Pulsed) Reverse Leakage Current (Rated VR, Pulsed) Junction Capacitance (VR = 10V, f = 1MHz, TA = 25oC) IF = 10 A IF = 20 A IF = 30 A IF = 40 A IF = 10 A IF = 20 A IF = 30 A IF = 40 A IF = 10 A IF = 20 A IF = 30 A IF = 40 A TA = 25ºC TA = 125ºC TA = 150ºC TA = 175ºC Symbol Min Typ Max Units VF1 VF2 VF3 VF4 VF5 VF6 VF7 VF8 VF9 VF10 VF11 VF12 –– –– –– –– –– –– –– –– –– –– –– –– 1.10 1.20 1.35 1.45 1.15 1.27 1.73 1.97 1.10 1.15 1.25 1.40 1.25 1.35 1.50 1.65 1.50 2.30 1.30 1.60 IR1 IR2 IR3 IR4 –– 30 40 50 60 100 500 - A CJ –– 1500 2000 pF VDC VDC VDC NOTES: * 1/ 2/ 3/ 4/ Pulse Test: Pulse Width = 300 usec, Duty Cycle = 2% For Ordering Information, Price, and Availability Contact Factory. Screened to MIL-PRF-19500. Unless Otherwise Specified, All Electrical Characteristics @25ºC Terminal Pads 1 & 3 must be connected together for testing and at the Board Level. Available Part Numbers: SSR40C100S1 SSR40C120S1 Package SMD1 PIN ASSIGNMENT Pin 1 Pin 2 Anode Cathode Pin 3 Anode SMD1 Outline: Tolerances (Unless Specified): .XX = ±.030” .XXX = ±.010” NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0043D DOC