SSR05C120 Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638-5223 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 5 A / 1200 V Schottky Silicon Carbide Rectifier Designer’s Data Sheet Part Number / Ordering Information 1/ SSR05C __ __ __ __ │ │ │ └ Screening __ = Not Screened │ │ │ TX = TX Level TXV = TXV │ │ │ S = S Level │ │ │ │ │ └ Package 2/ G = Cerpack │ │ S.5 = SMD.5 │ │ GL = Leaded Cerpack │ └ Configuration │ └ Voltage 100 = 1000 V 120 = 1200 V FEATURES: • • • • • • • 1200 Volt Silicon Carbide Schottky Rectifier Average Output Current 5 Amps No Reverse Recovery No Forward Recovery No Switching Time Change Over Temperature Small Package Size TX, TXV, and Space Level Screening Available. Consult Factory. MAXIMUM RATINGS SSR05C100 SSR05C120 Peak Repetitive and Peak Reverse Voltage Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave) Peak Surge Current o (8.3 ms Pulse, Half Sine Wave, TA = 25 C) Operating & Storage Temperature Junction Temperature Maximum Thermal Resistance (Junction to Case) 2/ CERPACK (G) Drawing# 60-0149-366 2/ SMD .5 (S.5) Drawing# 60-0149-507 Symbol Value Units VRRM VR 1000 1200 Volts IO 5 Amps IFSM 30 Amps T OP & Tstg -55 to +250 TJ -55 to +250 RθJC 3.0 LEADED CERPACK (GL) Drawing# 60-0149-366-1 o o C o C C/W 2/ TAB SIZE =0.250W x 0.360L x 0.005” Thick NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0030F DOC SSR05C120 Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638-5223 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS 3/ Instantaneous Forward Voltage Drop (TA=25ºC, 300 - 500 μsec pulse) Instantaneous Forward Voltage Drop (300 - 500 μsec pulse) Reverse Leakage Current (Rated VR, TA = 25ºC, 300 μsec pulse minimum) Reverse Leakage Current (Rated VR, TA = 150ºC, 300 μsec pulse minimum) Symbol Min Typ Max Units VF1 VF2 VF4 VF5 –– –– –– –– 1.21 1.65 1.46 2.60 1.30 1.75 1.50 2.80 VDC IR1 –– 20 250 μA IR2 –– 100 1000 μA CJ –– 280 320 pF IF = 2.0 A IF = 5.0 A TA= -55ºC, IF = 5 A TA= 150 ºC, IF = 5 A Junction Capacitance o (VR = 10V, f = 1MHz, TA = 25 C) NOTES: * Pulse Test: Pulse Width = 300 μsec, Duty Cycle = 2% VDC PIN ASSIGNMENT 1/ For Ordering Information, Price, and Availability Contact Factory. 2/ For Package Outlines Contact Factory. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC Package Pin 1 Pin 2 Pin 3 Cerpack (G) Anode Anode Cathode Available Part Numbers: SMD.5 (S.5) Cathode Anode Anode SSR05C100G, SSR05C100GL, SSR05C100S.5 SSR05C120G, SSR05C120GL, SSR05C120S.5 Cerpack Leaded (GL) Anode Anode Cathode Package Outline: CERPACK Package Outline: SMD.5 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Package Outline: LEADED CERPACK DATA SHEET #: SH0030F DOC