SSR10C120 Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638-5223 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 10 A / 1200 V Schottky Silicon Carbide Rectifier Designer’s Data Sheet Part Number / Ordering Information 1/ SSR10C __ __ __ __ │ │ │ └ Screening __ = Not Screened │ │ │ TX = TX Level TXV = TXV │ │ │ S = S Level │ │ │ │ │ └ Package 2/ G = Cerpack │ │ S.5 = SMD.5 │ │ GL = Leaded Cerpack │ └ Configuration │ └ Voltage 080 = 800 V 100 = 1000 V 120 = 1200 V FEATURES: 1200 Volt Silicon Carbide Schottky Rectifier Average Output Current 10 Amps No Reverse Recovery No Forward Recovery No Switching Time Change Over Temperature Small Package Size TX, TXV, and Space Level Screening Available. Consult Factory. MAXIMUM RATINGS SSR05C080 SSR05C100 SSR05C120 Peak Repetitive and Peak Reverse Voltage Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave) Peak Surge Current (8.3 ms Pulse, Half Sine Wave, TA = 25oC) Operating & Storage Temperature Junction Temperature Maximum Thermal Resistance (Junction to Case) 2/ CERPACK (G) Drawing# 60-0149-366 2/ SMD .5 (S.5) Drawing# 60-0149-507 Symbol Value Units VRRM VR 800 1000 1200 Volts IO 10 Amps IFSM 50 Amps TOP & Tstg -55 to +250 TJ -55 to +250 RθJC 3.0 LEADED CERPACK (GL) Drawing# 60-0149-366-1 o o C o C C/W 2/ TAB SIZE =0.250W x 0.360L x 0.005” Thick NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0067A DOC SSR10C120 Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638-5223 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS 3/ Symbol Min Typ Max Units 1.30 1.75 2.00 2.00 2.80 VDC VF1 VF2 VF3 VF4 VF5 –– –– 1.05 1.25 1.50 1.40 2.00 Reverse Leakage Current (Rated VR, TA = 25ºC, 300 sec pulse minimum) IR1 –– 10 100 A Reverse Leakage Current (Rated VR, TA = 150ºC, 300 sec pulse minimum) IR2 –– 15 500 A Junction Capacitance (VR = 10V, f = 1MHz, TA = 25oC) CJ –– 375 450 pF Instantaneous Forward Voltage Drop (TA=25ºC, 300 - 500 sec pulse) IF = 2.0 A IF = 5.0 A IF = 10.0 A Instantaneous Forward Voltage Drop (300 - 500 sec pulse) TA= -55ºC, IF = 10 A TA= 150 ºC, IF =10A –– –– VDC NOTES: * Pulse Test: Pulse Width = 300 sec, Duty Cycle = 2% 1/ For Ordering Information, Price, and Availability Contact Factory. 2/ For Package Outlines Contact Factory. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC Package Pin 1 Pin 2 Pin 3 Cerpack (G) Anode Anode Cathode Available Part Numbers: SMD.5 (S.5) Cathode Anode Anode SSR10C080G, SSR10C080GL, SSR10C080S.5 SSR10C100G, SSR10C100GL, SSR10C100S.5 SSR10C120G, SSR10C120GL, SSR10C120S.5 Cerpack Leaded (GL) Anode Anode Cathode Package Outline: CERPACK PIN ASSIGNMENT Package Outline: SMD.5 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Package Outline: LEADED CERPACK DATA SHEET #: SH0067A DOC