SPD0802 thru SPD1002 Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Designer’s Data Sheet 2 AMP 80 - 100 VOLTS SCHOTTKY RECTIFIER Part Number/Ordering Information 1/ SPD __ __ __ │ │ └ Screening 2/ │ │ │ │ │ │ │ │ └ │ │ │ │ └ __ = Not Screened TX = TX Level TXV = TXV S = S Level Features: Package Type __ = Axial Leaded SM = Surface Mount Round Tab SMS = Surface Mount Square Tab Family/Voltage 0802 = 80 V 0902 = 90 V 1002 = 100 V Maximum Ratings SPD0802 SPD0902 SPD1002 Reverse Voltage Average Rectified Forward Current (Resistive Load, 60Hz, Sine Wave, TL or TE = 55ºC) PIV to 100 Volts Extremely Low Forward Voltage Drop Low Reverse Leakage Current High Surge Capacity Possible Replacement for 1N5802 - 1N5806 Series Hermetically Sealed For high voltage versions, see data sheet SH0077 TX, TXV, and Space Level Screening Available2/ Category III metallurgical bond per MIL-PRF19500 appendix A Symbol Value Units VRRM VRWM VR 80 90 100 Volts IO 2 Amps IFSM 40 Amps TOP & TSTG -55 to +150 ºC RƟJL RƟJE 70 50 ºC/W Peak Surge Current (8.3 ms Pulse, Half Sine Wave Superimposed on Io, allow junction to reach equilibrium between pulses, TA = 25ºC) Operating and Storage Temperature Range Maximum Thermal Resistance Junction to Lead, L = .25" (Axial Lead) Junction to End Tab (Surface Mount) NOTES: 1/ For ordering information, price, and availability- Contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Axial Lead Surface Mount Round Tab DATA SHEET #: RS0006G Surface Mount Square Tab DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com SPD0802 thru SPD1002 Series Electrical Characteristic Instantaneous Forward Voltage Drop (TJ = 25ºC, 300 - 500 µsec pulse) Instantaneous Forward Voltage Drop (IF = 1A, 300 - 500 µsec pulse) Reverse Leakage Current (VR = Rated VR, TA = 25ºC, 300 µsec min pulse) Reverse Leakage Current (VR = Rated VR, TA = 100ºC, 300 µsec min pulse) Junction Capacitance (VR=10 Vdc, TA=25ºC, f=1MHz) IF = 0.5A IF = 1A IF = 2A TA = -55ºC TA = 100ºC Symbol Min Max Units VF1 VF2 VF3 VF4 VF5 ----------- 0.73 0.85 0.95 0.88 0.78 IR1 --- 100 µA IR2 --- 2 mA CJ --- 40 pF Volts Volts Consult manufacturing for operating curves CASE OUTLINE: Axial Lead DIMENSIONS DIM MIN MAX A 0.155” 0.185” B 0.080” 0.107” C 1.00” -- D 0.028” 0.032” CASE OUTLINE: Surface Mount Round Tab (SM) DIMENSIONS DIM MIN MAX A 0.095” 0.105” B 0.190” 0.210” C 0.015” 0.025” D 0.002” -- CASE OUTLINE: Surface Mount Square Tab (SMS) DIMENSIONS DIM DIM DIM A 0.200” 0.235” B 0.125” 0.135” C 0.020” 0.030” D 0.002” -- Dimensions prior to solder dip NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RS0006G DOC