SDR1304 thru SDR1308 SDR1304SMS thru SDR1308SMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 3 AMP, 400 – 800 Volts 70 nsec, Ultra Fast Rectifier DESIGNER’S DATA SHEET Part Number / Ordering Information 1/ SDR130 __ __ __ __ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ L Features: 2/ = None ⏐ ⏐ L Screening or TX , TXV, S ⏐ ⏐ Package = Axial L ⏐ SMS = Surface Mount ⏐ L Lead Dia ___ = .050” standard A = .040” special order Voltage 4 = 400 V 6 = 600 V 8 = 800 V • • • • • • • • Ultra Fast Recovery: 70 nsec @ 25°C, PIV to 700 Volts Hermetically Sealed Void Free Construction For High Efficiency Applications Low Forward Voltage Drop Single Chip Construction Replaces UES 1304 Types • TX, TXV, Space Level Screening Available2/ Maximum Ratings Peak Repetitive Reverse and DC Blocking Voltage SDR1304 SDR1306 SDR1308 Average Rectified Forward Current (Resistive Load, 60 Hz Sine Wave, TA = 25ºC) Peak Surge Current (8.3 ms Pulse, Half Sine Wave Superimposed on Io, Allow Junction to Reach Equilibrium Between Pulses, TA = 25ºC) Operating & Storage Temperature Maximum Thermal Resistance Junction to Lead, L = 3/8 " Junction to End Tab Notes: 1/ For Ordering Information, Price, and Availability – Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flows Available on Request. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Symbol Value Units VRRM Volts VR 400 600 800 Io 3.0 Amps IFSM 75 Amps Top & Tstg -65 to +175 ºC RθJL RθJE 20 14 ºC/W Axial Leaded DATA SHEET #: RU0095D Surface Mount (SMS) DOC SDR1304 thru SDR1308 SDR1304SMS thru SDR1308SMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Electrical Characteristics Part Type Symbol Instantaneous Forward Voltage Drop (TA = 25ºC, pulsed) IF = 3A Instantaneous Forward Voltage Drop (TA = -55ºC, pulsed) IF = 3A Reverse Leakage Current (Rated VR, TA = 25ºC, pulsed) Reverse Leakage Current (Rated VR, pulsed) Junction Capacitance (VR = 10 Vdc, TA = 25ºC, f = 1MHz) Reverse Recovery Time (IF = 500 mA, IR = 1A, IRR = 0.25A B Max 1.25 1.35 1.40 1.50 Units SDR1304 - 1306 SDR1308 VF1 –– SDR1304 - 1306 SDR1308 VF2 –– All IR1 –– 10 μA SDR1304 - 1306 @ 125°C SDR1308 @ 100°C IR2 –– 150 150 μA All CJ –– 50 pF All trr –– 70 nsec Case Outline: (Axial) D Min ØC D ØA Volts Volts DIMENSIONS SDR1304 & SDR1306 DIM MIN MAX 0.140” 0.170” A –– 0.200” B 0.047” 0.053” C 1.00” –– D DIMENSIONS SDR1308 DIM MIN MAX 0.140” 0.170” A –– 0.215” B 0.045” 0.053” C 1.00” –– D Case Outline: Surface Mount (SMS B DIMENSIONS SDR1304 & SDR1306 DIM MIN MAX 0.172” 0.180” A 0.200” 0.250” B 0.020” 0.035” C 0.002” –– D A A C D NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DIMENSIONS SDR1308 DIM MIN MAX 0.172” 0.180” A 0.200” 0.265” B 0.020” 0.035” C –– 0.002” D DATA SHEET #: RU0095D DOC