PRELIMINARY SDRS614LL Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 250 mA 2,200 VOLTS FAST RECOVERY HIGH VOLTAGE RECTIFIER Designer’s Data Sheet FEATURES: • • • • • • • • • Fast Reverse Recovery: 300 nsec Maximum PIV 2,200 Volts Hermetically Sealed Void-Free Construction Metallurgically Bonded 175°C Maximum Operating Temperature Miniature Package TX, TXV, and Space Level Screening Available Lead Free Termination Available, Contact Factory ELECTRICAL CHARACTERISTICS 1/ 2/ 3/ 4/ Peak Inverse Part Number Voltage Average Reverse 5/ Rectified Recovery Current Time Maximum Junction Capacitance Maximum Surge Current (1 Cycle) Typical Thermal Impedance Maximum Forward Voltage Maximum Reverse Current IR @ 80% of PIV Symbol PIV IO trr CJ IFSM ? JL VF Units Volts mA nsec pF Amps °C/W Volts Conditions 2,200 250 Max VR = 100V, f T = 1MHz 300 5.0 20 L = ¼” 60mA 45 1.7 µA o 100o C 1.0 30 250mA 25 C 2.2 NOTES: ° 1/ Unless Otherwise Specified, All Electrical Characteristics @25 C. 2/ Operating and testing over 10,000 V/inch may require encapsulation or immersion in suitable dielectric material. ° 3/ Maximum lead temperature for soldering is 250 C, 3/8” from case for 5 sec. maximum. ° ° 4/ Operating and storage temperature: -65 C to +175 C. 5/ Recovery Conditions IF = 1/2 A, IR = 1.0 A rec. to 1/4 A. PACKAGE OUTLINE: AXIAL RECTIFIER NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DIMENSIONS CODE MIN MAX A --.135” B --.170” C .028” .032” D 1.0” --- DATA SHEET #: RC0100A DOC