SGB10UF and SGB35UF Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 60 mA 1000 ─ 3500 VOLTS 60 nsec HIGH VOLTAGE RECTIFIER Designer’s Data Sheet SGB ___ │ │ │ │ │ │ │ └ UF │ │ │ │ │ └ ___ └ Screening 7/ __ = Not Screened TX = TX Level TXV = TXV S = S Level Recovery Time UF = Ultra Fast Voltage/Family 10 = 1000V 15 = 1500V 20 = 2000V 25 = 2500V 30 = 3000V 35 = 3500 V • • • • • • • • FEATURES: Ultra Fast Recovery: 60nsec Maximum PIV to 3500 Volts Hermetically Sealed Void-Free Construction Metallurgically Bonded 175°C Maximum Operating Temperature Micro Miniature Package TX, TXV, and Space Level Screening Available7/ ELECTRICAL CHARACTERISTICS Peak Inverse Voltage Average Rectifier Current Maximum Reverse Current Maximu m Forward Voltage Maximum Surge Current (1 Cycle) Maximum Reverse Recovery Time Maximum Junction Capacitance Typical Thermal Impedance Symbol PIV I0 IR @ PIV VF 2/ IFSM tRR 5/ CJ θJL Units Volts mA μA Volts Amps nsec pF °C/W L = 1/4" 185 185 185 185 185 185 Part Number Conditions SGB10UF SGB15UF SGB20UF SGB25UF SGB30UF SGB35UF 1000 1500 2000 2500 3000 3500 25°C 100°C 25°C 100°C 25°C 25°C 25°C VR = 100V fT = 1MHZ 60 60 60 60 60 60 45 45 45 45 45 45 0.1 0.1 0.1 0.1 0.1 0.1 10 10 10 10 10 10 9.5 9.5 9.5 9.5 9.5 9.5 5 5 5 5 5 5 60 60 60 60 60 60 1.0 1.0 1.0 1.0 1.0 1.0 Axial NOTES: 1. Operating and testing over 10,000 V/inch may require encapsulation or immersion in suitable dielectric material. 2. IF = I0; Maximum forward voltage measured with instantaneous forward pulse of 300msec minimum. 3. Maximum lead temperature for soldering is 250oC, 3/8" from case for 5 sec maximum. 4. Operating and Storage temperature: -65 to +175oC. 5. Reverse Recovery Test Conditions: IF = 50mA, IR = 100mA, IRR = 25mA, TA = 25oC. 6. Consult manufacturing for operating curves. 7. Screening based on MIL-PRF-19500. Screening flows available on request. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RV0003F DOC Solid State Devices, Inc. SGB10UF and SGB35UF 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com PACKAGE OUTLINE: AXIAL RECTIFIER DIMENSIONS NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DIM MIN MAX A -- .150” B -- .090” C 1.00” -- D .022” .028” DATA SHEET #: RV0003F DOC