SUM8.2F & FSMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 0.5 AMP 8200 VOLTS 450 nsec HIGH VOLTAGE RECTIFIER Designer’s Data Sheet Part Number / Ordering Information 1/ SUM 8.2 F ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ L _ _ __ 2/ L Screening = None ⏐ ⏐ TX = TX Level ⏐ ⏐ TXV = TXV Level ⏐ ⏐ S = S Level ⏐ ⏐ Package L ⏐ ___ = Axial ⏐ SMS = Surface Mount Square Tab ⏐ Recovery Time FEATURES: • • • L F = Fast Recovery Voltage • • • • 8.2 = 8200 V Fast Recovery: 450 nsec Maximum PIV 8200 Volts Hermetically Sealed Axial and Surface Mount Package Void-Free Construction Metallurgically Bonded 175°C Maximum Operating Temperature TX, TXV, and Space Level Screening Available2/ ELECTRICAL CHARACTERISTICS Part Number Peak Inverse Voltage Average Rectifier Current Maximum Reverse Current Maximum Forward Voltage Maximum Surge Current (1 Cycle) Maximum Reverse Recovery Time Maximum Junction Capacitance Typical Thermal Impedance Symbol PIV I0 IR VF IFSM tRR CJ θJL/θJE mA μA Volts Amps nsec pF °C/W Units Conditions SUM8.2F Volts 8200 25°C 100°C 25°C 100°C 25°C 25°C 25°C VR = 100V fT = 1MHZ L = 3/8” 500 300 1.0 15 13 25 450 8 18 1/ For Ordering Information, Price, and Availability – Contact Factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ Operating and testing over 10,000 V/inch may require encapsulation or immersion in a suitable dielectric material. 4/ IF = IO; Max. forward voltage measured with instantaneous forward pulse of 300µsec minimum. 5/ Max. Lead/End Tab temp. for soldering is 250°C, 3/8” from case for 5 sec maximum. 6/ Operating and storage temperature: -65°C to +175°C. 7/ Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=.25A, TA=25°C. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Axial DATA SHEET #: RC0052B Surface Mount Square Tab DOC SUM8.2F & FSMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com PACKAGE OUTLINE: Axial D B DIMENSIONS ØC D ØA DIM MIN MAX A .065” 0.165” B --- .350” C 0.047” 0.053” D 1.00” –– PACKAGE OUTLINE: Surface Mount Square Tab B DIMENSIONS A A C DIM MIN MAX A 0.170” 0.180” B 0.330” 0.380” C 0.020” 0.030” D 0.002” –– D Notes: Consult manufacturing for operating curves. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0052B DOC