SGB10UF and SGB35UF Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 60 mA 1000 - 3500 VOLTS 60 nsec HIGH VOLTAGE RECTIFIER Designer’s Data Sheet FEATURES: • • • • • • • • Ultra Fast Recovery: 60nsec Maximum PIV to 3500 Volts Hermetically Sealed Void-Free Construction Metallurgically Bonded 175°C Maximum Operating Temperature Micro Miniature Package TX, TXV, and Space Level Screening Available AXIAL ELECTRICAL CHARACTERISTICS Peak Inverse Voltage Average Rectifier Current Maximum Reverse Current Maximu m Forward Voltage Maximum Surge Current (1 Cycle) Maximum Reverse Recovery Time Maximum Junction Capacitance Typical Thermal Impedance Symbol PIV I0 IR @ PIV V F 2/ IFSM tRR 5/ CJ θ JL Units Volts mA µA Volts Amps nsec pF °C/W Part Number Conditions SGB10UF SGB15UF SGB20UF SGB25UF SGB30UF SGB35UF 1000 1500 2000 2500 3000 3500 25°C 100°C 25°C 100°C 25°C 25°C 25°C VR = 100V fT = 1MHZ L = 1/4" 60 60 60 60 60 60 45 45 45 45 45 45 0.1 0.1 0.1 0.1 0.1 0.1 10 10 10 10 10 10 9.5 9.5 9.5 9.5 9.5 9.5 5 5 5 5 5 5 60 60 60 60 60 60 1.0 1.0 1.0 1.0 1.0 1.0 185 185 185 185 185 185 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RV0003E DOC Solid State Devices, Inc. SGB10UF and SGB35UF 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com PACKAGE OUTLINE: AXIAL RECTIFIER DIMENSIONS DIM MIN MAX A -- .150” B -- .090” C 1.00” -- D .022” .028” NOTES: 1. Operating and testing over 10,000 V/inch may require encapsulation or immersion in suitable dielectric material. 2. IF = I 0; Maximum forward voltage measured with instantaneous forward pulse of 300msec minimum. 3. Maximum lead temperature for soldering is 250o C, 3/8" from case for 5 sec maximum. 4. Operating and Storage temperature: -65 to +175o C. 5. Reverse Recovery Test Conditions: I F = 50mA, I R = 100mA, I RR = 25mA, TA = 25o C. 6. Consult manufacturing for operating curves. NOTE: All specifications are subject to change without notification. SCD's for these devices sh ould be reviewed by SSDI prior to release. DATA SHEET #: RV0003E DOC