F-215 (Rev 09JUL15) ERM8–060–01–L–D–EM2–TR ® ERM8–030–01–L–D–RA–L–K–TR (0.80 mm) .0315" ERM8-RA, ERM8-EM SERIES ® RUGGED EDGE RATE STRIPS ERM8-RA / ERM8-EM Board Mates: ERF8 NO. OF POSITIONS PER ROW ERM8 PLATING OPTION 01 D RA OTHER OPTION TR ERM8-EM Cable Mates: ERCD, ERDP ERM8-RA Cable Mates: ERCD –010, –013, –020, –025, –030, –040, –049, –050, –060, –070, –075 SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?ERM8-RA or www.samtec.com?ERM8-EM Insulator Material: Black LCP Terminal Material: Phosphor Bronze Latch Material: BeCu Plating: Au or Sn over 50µ" (1.27 µm) Ni Current Rating: 2.2 A per pin (1 pin powered per row) Operating Temp Range: -55°C to +125°C Voltage Rating: ERM8-RA: 235 VAC max ERM8-EM: 200 VAC max RoHS Compliant: Yes (5.75) .226 –L = Latching –DS Ground Pin (0.80) .0315 (1.57) (1.00) .062 .039 DIA NO. OF POSITIONS PER ROW ERM8 ARM/HSSTP ™ NEXUS5001 .org POWER.org™ ASP-137971-01 ASP-137974-01 ASP-133811-01 ASP-133811-02 ASP-135040-01 Note: Patented Note: Some lengths, styles and options are non-standard, non-returnable. (6.12) .241 01 –L 01 PLATING OPTION D –DS OPTION PIN PAIR COUNT COUNT 2x13 2x25 8 16 01 No. of positions x (0.80) .0315 + (9.00) .354 EGPS = No. of positions x (0.80) .0315 + (10.00) .394 (3.82) .150 SERIES ERM8-EM ERM8-EM ERM8-EM ERM8-EM ERM8-EM EM2 = (1.60 mm) .062" Thick PCB (5.70) .224 (6.80) .268 –L = Latching (Mates to ERF8 Lead Style –05.0 or –RA only) –DS (14.79) .582 (5.60) .220 (0.80) .031 OTHER OPTION = Differential Pair (–013, –025 pos.only) (Hot Swap) 02 –EGPS –EGPS = Extended Guide Post Shield (–010, –020, –025, –030 pos.only) –DSS (3.20) .126 (7.75) .305 (5.20) .205 (MOQ Required) –EM2 = 10µ" (0.25 µm) Gold on contact, Matte Tin on tail –005, –010, –013, –020, –025, –030, –040, –049, –050, –060, –070, –075 ALSO AVAILABLE • Other positions • Solder leads & weld tab for (2.36 mm) .093" thick board • Other platings Contact Samtec. (1.40) .055 –L APPLICATIONS 11 17 20 23 35 Ground Pin Signal Pins –DS (1.68) .066 (0.35) .014 Rated @ 3dB ERM8-EM/ERF8 Insertion Loss* Single-Ended Signaling 7.5 GHz / 15 Gbps Differential Pair Signaling 7.5 GHz / 15 Gbps *Performance data includes effects of a non-optimized PCB. Complete test data available at www.samtec.com?ERM8-EM or contact [email protected] POS. PART NOs. = Differential Pair (–013, –025 positions only) (Hot swap) 02 (6.25) .246 For complete scope of recognitions see www.samtec.com/quality STANDARD –TR = Tape & Reel No. of Positions x (0.80) .0315 + (13.00) .512 (5.01) .197 Lead–Free Solderable: Yes SMT Lead Coplanarity (ERM8-RA): (0,10 mm) .004" max (010-050) (0,15 mm) .006" max (060-075) SMT Lead Coplanarity (ERM8-EM): (0.10 mm) .004" max (005-030) (0.12 mm) .005" max (040-075) NEXUS5001™.org POWER.org™ –K = (6.00 mm) .236" DIA Polyimide Film Pick & Place Pad (11.00) .433 Processing: RECOGNITIONS –L = 10µ" (0.25 µm) Gold on contact, Matte Tin on tail = Differential Pair + Extended Guide Post Shield (–025 pos. only) (Hot Swap) (2.10) .082 (0.80) .0315 –L OPTION –L WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice. TR –TR = Tape & Reel