F-215 ® EPLSP–019–2000 (0,80 mm) .0315" I/O SYSTEM EPLSP SERIES RUGGED LATCHING HIGH SPEED SYSTEM Low profile latching ® FEATURES • • • • Rugged external cable Small form factor Low profile latching Metal-to-metal two-piece contact system • High mating cycles • High cable flex life (500 cycles 180° bend) • Small bend radius Mates with: ERI8 32 AWG Low Skew Pair APPLICATION s ocol t o r P rted o p p Su ERC–019–01–02 ERI8–019–S–D–RA SAS SATA el Fibre Chann Ethern®et PCIe ™ InfiniBand SPECIFICATIONS For complete specifications see www.samtec.com?EPLSP Cable: 32 AWG Low Skew Pair/ 28 AWG Power Bend Radius: (25,40 mm) 1.00" Signal Routing: 100Ω Differential Pinout Map: 1:1 Map Standard (See web address above for additional information) Operating Temp Range: -20°C to +105°C Current Rating: 1.7 A per pin (1 pin powered per row) RoHS Compliant: Yes EPLSP Cable Rated @ 7dB Length* Insertion Loss 1 meter (39.4") 21 Gbps 3 meters (118") 9.5 Gbps Longer cables and better performance available. See EPLSP-E Series Performance and complete test data available at www.samtec.com?EPLSP or contact [email protected] High cycles report at Download test ?EPLSP com www.samtec. Metal-to-metal contact interface EPLSP–019–1000 NO. OF POSITIONS TYPE LENGTH –019 –“XXXX” = 8 Pairs, 5 Power, 2 Clock, 19 positions EPLSP = Length in millimeters –1000, –2000, –3000 (Standard lengths) –031 = Eye Speed® I/O Cable = 16 Pairs, 5 Power, 2 Clock, 31 positions ALSO AVAILABLE (MOQ Required) NO. OF POSITIONS –019 –031 OTHER SOLUTIONS A • Other lengths Contact Samtec. (23,85) .939 (32,95) 1.30 (50,40) 1.984 (7,57) .298 A End 2 reversed to show bottom view (8,79) .346 • IP68 Sealed System (RCH/RPBH Series). For more information, see www.samtec.com?RCH and www.samtecom?RPBH. (6,00) .236 LENGTH Note: This Series is non-standard, non-returnable. WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice. F-215 ® EPLSP-E–031–1000 I/O SYSTEM (0,80 mm) .0315" EPLSP-E SERIES RUGGED LATCHING HIGH SPEED SYSTEM SPECIFICATIONS Mates with: ERI8 For complete specifications see www.samtec.com?EPLSP-E Cable: 32 AWG Low Skew Pair/ 28 AWG Power Bend Radius: (25,40 mm) 1.00" Signal Routing: 100Ω Differential Pinout Map: 1:1 Map Standard (See web address above for additional information) Operating Temp Range: -20°C to +105°C RoHS Compliant: Yes 32 AWG Low Skew Pair ® Performance Comparisons Data Rate EPLSP EPLSP-E Δ 14 Gbps 2 m (80") 2,8 m (112") + 40% 28 Gbps N/A 0,5 m (20") N/A Cable Length EPLSP EPLSP-E Δ 1 meter (39.4") 21 Gbps 25.5 Gbps + 20% 3 meters (118") 9.5 Gbps 13 Gbps + 37% Passive Equalization for improved performance Rated at 7dB insertion loss Performance and complete test data available at www.samtec.com?EPLSP-E or contact [email protected] NO. OF POSITIONS TYPE LENGTH –019 = 16 Pairs, 5 Power, 2 Clock, 31 positions NO. OF POSITIONS –019 –031 (70,00 mm) 2.76" (50,40) 1.984 Bend Radius (25,40 mm) 1.00" = Length in millimeters –1000, –2000, –3000 (Standard lengths) –031 = Equalized Eye Speed® I/O Cable APPLICATION –“XXXX” = 8 Pairs, 5 Power, 2 Clock, 19 positions EPLSP-E A N N+1 Nx2 (23,85) .939 19 20 38 (32,95) 1.30 31 32 62 ALSO AVAILABLE (MOQ Required) • Other lengths Contact Samtec. (7,57) .298 A End 2 reversed to show bottom view (8,79) .346 (6,00) .236 LENGTH Note: This Series is non-standard, non-returnable. WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice.