ERDP–025–06.00–TEU–TTR–1–L F-215 ® (0,80 mm) .0315" ERDP–013–06.00–TTR–STR–2–D ERDP SERIES ® EDGE RATE TWINAX CABLE ASSEMBLIES Broadside wiping contacts reduce unwanted crosstalk Mates with: ERF8, ERM8 SPECIFICATIONSi For complete specifications and recommended PCB layouts see www.samtec.com?ERDP Cable: 30 AWG twinax ribbon cable Signal Routing: 100Ω Differential Plating: Au over 50µ" (1,27 µm) Ni Operating Temp Range: -25°C to +125°C RoHS Compliant: Yes ® Rated @ 7dB Insertion Loss ERDP 10" (0,25 m) 7.50 GHz / 15.00 Gbps Performance data for other cable lengths and complete test data available at www.samtec.com?ERDP or contact [email protected] Cable Length 30 AWG twinax ribbon cable (0,80 mm) .0315" pitch s ocol t o r d P orte p p u S ERDP SAS SATA el Fibre Chann et n er Eth ® PCIe ™ InfiniBand END TO END B DV to DV (23,47) .924 DV to Edge Mount (-TEX) (26,69) 1.051 Edge Mount (-TEX) END NO. 1 –TTR = Wire Length in Inches (43,7 mm) 01.72" minimum = Terminal, Top Right A –013 (25,86) 1.018 –025 (34,67) 1.365 –049 (53,85) 2.120 = Terminal, Top Left = Terminal, Bottom Right 02 –TBL 01 01 A = Terminal, Bottom Left = Pin 1 to Pin 2 –TEU = Terminal, Edge Mount Up –TED END NO.2 (–TTR SHOWN) WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice. Specify LATCH from chart (Required callout) –3 –4 = Pin 1 to Pin N ♦ –R –SBL LATCH = Pin 1 to Pin N -1 –STL = Terminal, Edge Mount Down END NO.1 (–STL SHOWN) –2 † –L = Socket, Bottom Left (13,76) .542 = Pin 1 to Pin 1 LATCH –SBR (10,19) .401 (7,72) .304 –1 –STR = Socket, Bottom Right (18,75) .738 WIRING OPTION = Socket, Top Right = Socket, Top Left Note: Cable lengths longer than 40.00" (1 meter) are not supported with S.I. test data. Note: Design your High Speed Cable with Samtec’s High Speed Cable Solutionator® at www.samtec.com/hdr –TTL –TBR OAL = Wire Length + B 02 END NO. 2 –“XX.XX” (29,92) 1.178 POSITIONS PER ROW Note: Some lengths, styles and options are non-standard, non-returnable. WIRE LENGTH NO. POSITIONS PER ROW –013 = 8 Pair, –025 = 16 Pair, –049 = 32 Pair report at Download test ?ERDP m co c. te www.sam Standard latch –D –N * –B ♦ –F † –S * –C * –G * –T ASSEMBLY End No. 1 Standard Latch, End No. 2 Squeeze Latch End No. 1 Squeeze Latch, End No. 2 Standard Latch Both Ends Standard Latch No Housing Both Ends Standard Latch Both Ends Squeeze Latch End No. 1 Screw Option, End No. 2 Friction Latch End No. 1 Friction Latch, End No. 2 Screw Option Both Ends Screw Option End No. 1 Screw Option, End No. 2 Squeeze Latch End No. 1 Squeeze Latch, End No. 2 Screw Option –B, –C, –G & –T option only available –TEX on both ends. * with –L & –S option only available with † –TEX on second end. & –F option only available with ♦ –R –TEX on first end.