RF-13 BNC7T–J–P–GN–ST–EM1 BNC7T–J–C–GN–ST–BH3 BNC7T–J–P–GN–RA–BH2D BNC7T SERIES 75Ω OPTIMIZED BNC JACKS & PLUGS Mates with: RF179, RFA6T, RFB6T, GRF7H-C BNC7T TYPE PLATING –J –P –GN –ST –TH1 –EM1D = Jack = PCB Mount = 10µ" (0,25 µm) Gold contact, 100µ" (2,54 µm) Nickel shell = Straight = Standard Through-hole = Edge Mount Die Cast Bulkhead/Panel Mount for (1,60 mm) .062" PCB (–ST only) GENDER ORIENTATION TERMINATION SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?BNC7T-TH, www.samtec.com?BNC7T-BH or www.samtec.com?BNC7T-EM Shell Material: Ni plated Brass (-TH1, -BH1, -EM1, -EM2) Zinc (-TH2D, -BH2D, -EM1D, -EM2D) Contact Material: Copper Alloy Insulator Material: PTFE Impedance: ST = 75Ω ±2Ω RA = 75Ω ±4Ω Frequency Range: 0~6 GHz * V.S.W.R: 1.45 max Working Voltage: 500 Vrms Dielectric Withstanding: 1500 Vrms min Contact Resistance: Center Contact: 1,5mΩ max Outer Contact: 0,4mΩ max Operating Temperature: -65°C to +125°C RoHS Compliant: Yes Lead–Free Solderable: Yes TOOL Tool for quickly installing/uninstalling knurl nut for BNC7T Series Part Number: TOOL–BNC7T–01 * Designed to meet SMPTE 424M 3G SDI specification. (25,48) 1.003 (18,11) .713 (9,63) .379 DIA (12,70) .500 (10,92) .430 For complete specifications and assembly instructions see www.samtec.com?BNC7T-CA Shell Material: Brass Contact Material: Brass (–P), Copper Alloy (–J) Center Contact: Soldered Outer Ferrule: Crimped Impedance: 75Ω Frequency Range: 0~4 GHz (–P)*, 0~3.5 GHz (–J)* V.S.W.R: 1.3 max Working Voltage: 500 Vrms Dielectric Withstanding: 1500 Vrms min Contact Resistance: Center Contact: 3mΩ max Outer Contact: 2mΩ max Insulator Resistance: 5,000 MΩ min Operating Temperature: -65°C to +125°C (19,00) .748 (9,63) .379 DIA –ST–EM1 & –ST–EM2 (29,00) 1.142 (8,80) .346 (4,50) .177 –ST–TH2D (13,50) .531 (9,63) .379 DIA (10,80) .425 (24,24) .954 –RA–BH2D (9,63) .379 DIA (4,00) .157 (32,75) 1.289 (11,30) .445 (3,00) .118 (18,10) .713 BNC7T * Designed to meet SMPTE 424M 3G SDI specification. GENDER –P = Plug –J = Jack –C = Cable –BH2D = Low Profile Die Cast Bulkhead Through-hole (–RA only) = Edge Mount Bulkhead/Panel Mount for (1,60 mm) .062" PCB (–ST only) –EM2 = Edge Mount Bulkhead/Panel Mount for (2,40 mm) .093" PCB (–ST only) –EM2D = Edge Mount Die Cast Bulkhead/Panel Mount for (2,40 mm) .093" PCB (–ST only) ORIENTATION –GN –ST –CA3 –CA6 = Straight = 10µ" (0,25 µm) Gold on contact, Nickel on outer contact and shell = RG 179 Cable (–P only) = Right Angle (-P only) = RG 6 or Belden 1694A Cable (–P only) –RA (29,80) 1.173 (18,70) .736 (14,50) .571 –BH1 = Standard Bulkhead Through-hole (–RA only) PLATING (21,70) .854 (15,20) .598 (13,80) .543 = Tall Through-hole * Lock washers & knurled nuts supplied with Bulkhead/Panel Mount options (26,95) 1.061 TYPE –TH2D –EM1 (4,50) .177 –ST–TH1 (9,63) (10,92) .379 .430 DIA (18,00) .709 –RA–BH1 SPECIFICATIONS –RA = Right Angle Bulkhead/ Panel Mount TERMINATION –CA3D = RG 179 Cable Die Cast (–P–ST only) –BH3 (17,50) .689 Hex. = Bulkhead, RG 179 Cable (–J only) (9,65) .380 –P–ST SHOWN –J–ST SHOWN Supplied with pins, ferrules, washers, nuts and gaskets. See website for dimensions. WWW.SAMTEC.COM –CA6D = RG 6 or Belden 1694A Cable Die Cast (–P–ST only)