RF-13 MMCXV–P–C–GF–ST–CA1 MMCXV–J–C–HF–ST–CA1 MMCXV–P–C–HF–RA–CA1 MMCXV–J–P–GF–ST–TH1 MMCXV SERIES 50Ω HIGH VIBRATION MMCX Mates with: RF174, RF316 GENDER MMCXV TYPE PLATING ORIENTATION TERMINATION –ST –TH1 –HF = Straight = Through-hole SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?MMCXV-EM, www.samtec.com?MMCXV-TH Contact Material: BeCu Insulator Material: PTFE Pin and Shell Material: Brass Operating Temp Range: -65°C to +125°C Insulation Resistance: 1000MΩ min Contact Resistance: Center: 5mΩ Outer: 2.5mΩ Impedance: 50Ω Dielectric Withstanding Voltage: 500 Vrms, 50Hz Dielectric Working Voltage: 170 Vrms, 50Hz V.S.W.R.: 1.3 max Frequency Range: 0~6 GHz RoHS Compliant: Yes Processing: –P –J = PCB Mount = Jack –P = Plug = 30µ" (0,76 µm) Gold center contact, 3µ" (0,08 µm) Gold outer contact –GF = 10µ" (0,25 µm) Gold center contact, 3µ" (0,08 µm) Gold outer contact (3,50) .138 SQ (3,50) .138 DIA (4,50) .177 DIA SPECIFICATIONS For complete specifications and assembly instructions see www.samtec.com?MMCXV-CA Shell Material: Brass Insulator Material: PTFE Lead, Contact Socket and Outer Conductor Material: BeCu with Au plating Center Contact: Soldered Outer Ferrule: Crimped Operating Temp Range: -65°C to +125°C Insulation Resistance: 1,000MΩ min Contact Resistance: Center: 5mΩ Outer: 2.5mΩ Impedance: 50Ω Dielectric Withstanding Voltage: 500 Vrms, 50Hz Dielectric Working Voltage: 170 Vrms, 50Hz Frequency Range: 0~6 GHz (Cable dependent) Note: The MMCX and MMCXV connectors are not inter-mateable. (0,35) .014 (7,40) .291 (0,90) .035 (3,40) .134 (4,35) .171 (7,40) .291 (7,40) .291 (3,50) .138 Lead-Free Solderable Yes Note: The MMCX and MMCXV connectors are not inter-mateable. –EM1 = Edge Mount (–J only) (0,70) .028 DIA (0,50) .020 –J–TH1 (4,40) .173 –J–EM1 –P–TH1 MMCXV GENDER TYPE PLATING ORIENTATION –HF –RA –CA1 = Right Angle (–P only) = RG 174/ 316 Cable –C –J = Cable = 30µ" (0,76 µm) Gold center contact, 3µ" (0,08 µm) Gold outer contact = Jack –P = Plug TERMINATION –ST = Straight –GF (8,80) .346 (4,48) .176 DIA = 10µ" (0,25 µm) Gold center contact, 3µ" (0,08 µm) Gold outer contact (13,60) .535 (7,00) .276 –J–ST (2.70) .106 DIA (9,60) .378 (4,48) .176 DIA (4,00) .157 (9,00) .354 –P–RA (14,41) .567 –P–ST –J Supplied with pins and ferrules. See–P website for dimensions. WWW.SAMTEC.COM