MCX–J–P–H–RA–SM1 RF-13 MCX–J–P–H–ST–SM1 MCX–P–P–H–RA–TH1 MCX–J–P–H–RA–TH1 MCX–J–P–H–ST–EM1 MCX–J–P–H–ST–TH1 MCX–P–P–H–ST–TH2 MCX SERIES 50Ω MCX MINI JACKS & PLUGS Mates with: RF174, RF316, RF178, GRF1H-C MCX GENDER TYPE PLATING ORIENTATION TERMINATION SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?MCX-TH, www.samtec.com?MCX-SM, www.samtec.com?MCX-EM or www.samtec.com?MCX-MT Insulator Material: PTFE Contact Material: BeCu, Brass (–P–TH) Shell Material: Brass Operating Temp Range: -65°C to +125°C Insulation Resistance: 1000MΩ min Contact Resistance: Center: 5mΩ max Outer: 2.5mΩ max Impedance: 50Ω V.S.W.R: 1.3 max (–ST) 1.5 max (–RA) Dielectric Withstanding Voltage: 1000 Vrms min, 50Hz Dielectric Working Voltage: 335 Vrms max Frequency Range: 0~6 GHz RoHS Compliant: Yes Processing: –J –P –H –RA –TH1 = PCB Mount = 30µ" (0,76 µm) Gold center contact, 3µ" (0,08 µm) Gold outer contact = Right Angle = Through-hole = Jack (9,50) .374 (6,00) .236 (3,45) .136 DIA (4,50) .177 DIA –RA–TH1 (5,00) .197 (5,88) .231 Lead-Free Solderable: Yes (3,45) .136 DIA (6,00) .236 (4,50) .177 DIA (4,50) .177 DIA (0,96) .038 DIA GENDER TYPE –P –ST–MT1 PLATING –H –RA –TH1 = Right Angle = Through-hole (–RA only) (4,55) .179 DIA (6,00) .236 Note: 75Ω version available. See MCX7 Series. TERMINATION = 30µ" (0,76 µm) Gold center contact, 3µ" (0,08 µm) Gold outer contact (6,50) .256 (0,50) .020 ORIENTATION –P (10,60) .417 (3,76) .148 DIA (3,20) .125 = PCB Mount = Plug (6,00) .236 (3,20) .125 (8,51) .335 (4,66) (0,96) .183 .038 DIA –ST–TH1 (6,25) .246 –ST–SM1 MCX (0,96) .038 DIA (9,30) .366 = Mixed Technology (–ST only) (0,96) .038 DIA (4,50) .177 DIA –ST–EM1 (3,45) .136 DIA (8,51) .335 (4,66) .183 (3,45) .136 DIA (0,40) .016 –MT1 (0,76) .030 (0,96) .038 DIA (4,80) .189 (3,45) .136 DIA = Edge Mount (–ST only) (6,00) .236 –RA–SM1 (0,96) .038 DIA –EM1 (9,50) .374 (6,00) (4,50) .236 .177 DIA (6,76) .266 (1,88) .074 DIA (6,70) .264 DIA –SM1 = Surface Mount (3,45) .136 DIA (0,50) .020 (9,20) .362 (3,20) .125 –ST = Straight –ST = Elevated Through-hole (–ST only) (11,20) .441 (3,00) .118 (13,00) .512 –ST–TH2 WWW.SAMTEC.COM (0,90) .035 DIA (3,76) .148 DIA (0,90) .035 DIA –RA–TH1 –TH2 = Straight (1,80) .071