RF-13 (Rev 20MAY14) SMP–PF–P–HH–ST–EM3 SMP–J–C–GF–RA–CA7 SMP–J–B–GF–ST–1450 SMP–J–C–GF–ST–CA5 SMP–PF–P–GF–ST–TH2 SMP SERIES 50Ω SMP JACKS/PLUGS & ADAPTOR SMP-PF, SMP-PL, SMP-PS, SMP-PC Mate with: SMP-B Bullet Adaptor SMP TYPE GENDER Cable Mates: RF405, BE25S, RF25S –PF SPECIFICATIONS = Plug, Full Detent Shell Material: Au plated Brass (–TH2, –EM3) Au plated BeCu (–J–B, –J–C) Contact Material: Brass (–TH2, –EM3) BeCu (–CA) Insulator Material: PTFE Impedance: 50Ω Frequency Range: DC to 40 GHz, DC to 20 GHz (25 AWG) V.S.W.R. (Interface): 1.15: 1 max to 26.5 GHz, 1.5: 1 max to 40 GHz Working Voltage: 335 Vrms min Dielectric Withstanding: 500 Vrms min Contact Resistance: Center Contact: 6mΩ max Outer Contact: 2mΩ max Insulator Resistance: 5000 MΩ min Engagement Force: -PF: 15 lbs. max -PL: 10 lbs. max -PS & -PC: 2 lbs. max Disengagement Force: -PF: 2 lbs. min -PL: 2 lbs. min -PS & -PC: 0.5 lbs. min Operating Temperature: -65°C to +165°C RoHS Compliant: Yes –PS = Plug, Catcher’s Mitt Note: While optimized for 50Ω applications, this connector can also perform well in certain 75Ω applications. Contact [email protected] for further information. (2,13) .084 (1,88) .074 –0645 PLATING –GF –B –C = Cable End –EM3 ALSO AVAILABLE LENGTH BOARD SPACE –1450 = Bullet Adaptor (4,06) .160 APPLICATION –PC–TH2 TYPE (5,08) .200 (4,43) .174 (5,99) .236 SQ J (4,34) .171 (2,09) .082 –PF/–PL/–PS–TH2 SMP –TH2 = Through-hole = Drop-in Edge Mount (N/A with –PC) (5,99) .236 DIA (5,78) .228 SQ (4,09) .161 (7,09) .279 –ST = Straight –EM3 = 30µ" (0,76 µm) Gold center and outer contact (–EM3 only) –PC (4,00) .157 DIA TERMINATION ORIENTATION –HH = Plug, Smooth Bore Lead–Free Solderable: Yes • The SMP Series is an alternative to the Corning Gilbert GPO Series. A mini SMP Series, available as an ASO, is an alternative to the Corning Gilbert GPPO Series. –GF = 10µ" (0,25 µm) Gold center contact, Gold Flash outer contact (–TH2 only) = Plug, Limited Detent Processing: ALTERNATIVE SOLUTIONS –P = PCB Mount –PL For complete specifications see www.samtec.com?SMP-TH, www.samtec.com?SMP-EM, www.samtec.com?SMP-B or www.samtec.com?SMP-CA PLATING = 10µ" (0,25 µm) Gold center contact, Gold Flash outer contact (9,05) .356 (17,10) .673 (MOQ Required) BOARD SPACE • Other lengths Contact Samtec. ORIENTATION BULLET LENGTH CABLE END –ST Leave blank for cable end Leave blank for bullet type –0645 –CA7 = 6,45 mm (.254") = RG 405 (.086" DIA) Semi-flexible Cable = Straight –RA = Right Angle (N/A with –B) –1450 = 14,50 mm (.571") (3,40) .134 DIA –CA5 = CCA-25M Cable –CS5 (6,45) .254 = MWC-2550-01 25 AWG (5,31) Microwave .209 Cable –0645 (7,00) .276 (3,55) .140 DIA (14,50) .571 –1450 WWW.SAMTEC.COM (8,00) .315 (4,36) .172 –ST–CXX –RA–CXX