F-215 (Rev 20AUG15) IPR1–06–D T1M74-L–01–F MRTD–06–24–L–03.3 (2.54 mm) .100" IPR1, T1M74, MRTD, MRTDT SERIES DISCRETE WIRE COMPONENTS & TOOLING SPECIFICATIONS PINS PER ROW D –02, –03, –04, –05, –06, –08, –10, –12, –15 = Double Row TYPE For complete specifications see www.samtec.com?IPR1, www.samtec.com?T1M74-L or www.samtec.com?T1M74-R TOOLING • Hand Tool: CAT-HT-174-2030-13 • Mini Applicator (20-24 AWG): CAT-MA-174-2024-XX-01 • Mini Applicator (26-30 AWG): CAT-MA-174-2630-XX-01 IPR1 = Body, Loose –D T1M74-L (7.62) .300 No. of positions x (2.54) .100 + (3.81) .150 –01 –F = 26 to 30 AWG = Gold flash on contact –02 = Contact, Loose (Standard sizes) = Contact, Full Reel (15,300 Parts per Reel) (5.08) .200 (8.38) .330 (17.53) .690 = 10µ" (0.25 µm) Gold on contact (19.33) .761 (1.57) .062 DIA (1.91) .075 (3.81) .150 (3.17) .125 Insulator Material: Nylon TYPE SPECIFICATIONS For complete specifications see www.samtec.com?MRTD or www.samtec.com?MRTDT Insulator Material: Nylon 66 Contact Material: Phosphor Bronze Plating: Au or Sn over 50µ" (1.27 µm) Ni Operating Temp Range: -40°C to +105°C (PVC) ® -55°C to +125°C (*Teflon ) Wire: 20 to 30 AWG RoHS Compliant: Yes *DuPont™ Teflon ® is a registered trademark of the E.I. du Pont de Nemours and Company or its affiliates. MRTD = Double Row PVC Cable MRTDT = Double Row *Teflon® Cable (20, 24, 28 & 30 AWG only) –02, –03, –04, –05, –06, –08, –10, –12, –15 –20 –20C♦ –22 –24 –24C♦ –26 –28 –28C♦ –30 (5.08) .200 (2.54) .100 (7.62) .300 No. of positions x (2.54) .100 + (3.81) .150 (MOQ Required) Note: Teflon ® cable is intended for crimp only. Contact Samtec for solderable cable applications. WIRE GAUGE 01 ALSO AVAILABLE • Other color coded cables (*Teflon® N/A) • Other sizes/pin counts. • Other Gold platings • Metal latch option Contact Samtec. PINS PER ROW (Standard sizes) –L = 20 to 24 AWG T1M74-R (9.65) .380 Mates with: MMSD(T) PLATING OPTION WIRE GAUGE TYPE Contact Material: Phosphor Bronze PLATING OPTION –L = 10µ" (0.25 µm) Gold on contact ASSEMBLY LENGTH PINOUT –“XX.X” Leave blank for single ended cable assembly. = Assembly Length in Inches Single ended = (76.2 mm) 03.0" min. Double ended = (84.0 mm) 03.3" min. Note: ♦ C specifies color coded cable. See website for color coding. –L1 = Plastic Transfer Latch up, straight –L4 = Plastic Transfer Latch down, straight END 1 APPLICATION MRTD (2.54) .100 (2.54) .100 (17.53) .690 (9.14) .360 MRTD/MRTDT MMSD END 2 Note: Acceptable panel thickness of (0.84 mm) .0329" to (2.28 mm) .0897" WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice.